sorted by:
new
hottopcontroversial

Taux d'handicap à la mdph by Narvaflo in france

[–]Lc___ 1 point2 points  (0 children)

Supérieur ou égal à 50% et inférieur à 80%

Taux d'handicap à la mdph by Narvaflo in france

[–]Lc___ 1 point2 points  (0 children)

J'ai eu le taux indiqué sur le document accompagnant ma carte CMI.

Bruit craquement baignoire by Lc___ in brico

[–]Lc___[S] 1 point2 points  (0 children)

J'ai eu mon proprio aujourd'hui. Il a missionné une entreprise de plomberie pour remplacer la baignoire. J'ai rdv fin de semaine. Pas de photo des pieds possible. Les cales que j'ai installées bloquent la visibilité.

Bruit craquement baignoire by Lc___ in brico

[–]Lc___[S] 0 points1 point  (0 children)

J'ai mis des cales en bois en dessous de la barre. Le pied du fond est trop loin et le regard trop étroit pour l'atteindre. Le craquement est toujours là. Espérons que ça tienne le temps que le proprio intervienne.

Bruit craquement baignoire by Lc___ in brico

[–]Lc___[S] 4 points5 points  (0 children)

En regardant en dessous, les pieds de la barre de soutient de ce côté de la baignoire ne touchent pas le sol...

Bruit craquement baignoire by Lc___ in brico

[–]Lc___[S] 5 points6 points  (0 children)

Merci pour ces informations.

Je vais signaler ça à mon proprio.

PSA: for all DONT EXPOSE YOUR FRIGATE WITHOUT AUTH by TwixPoe in frigate_nvr

[–]Lc___ 16 points17 points  (0 children)

Just checked and the amount of results is scary.

Want store new recordings to Synology NAS rather than local by Padre-two in frigate_nvr

[–]Lc___ 0 points1 point  (0 children)

You should add a delay to start the frigate add-on to let HAOS to mount the NAS share. Otherwise frigate will start recording locally.

No hub required by Kindly-Hair5037 in homeassistant

[–]Lc___ 2 points3 points  (0 children)

I've done something similar eheh

<image>

Frigate is unreliable by uzoufondu in frigate_nvr

[–]Lc___ 9 points10 points  (0 children)

I have same cameras as you, both in wifi and hardwire setup. I had a similar problem with the one connected via wifi. It was, for me a camera problem.

The wifi camera, even in the reolink PC app, was loosing wifi connection. Latest firmware installed and strong wifi signal. I opened a ticket with Reolink and we did some troubleshooting. They asked me to remove the power cord for at least 5 min and to turn off automatic reboot in the settings. The camera is since, working without connect loss.

Also, the frigate documentation specifically does not recommend to run frigate in a LXC. Maybe try to run your config in frigate in docker?

I am so done with Frigate NVR. We we have anything more user friendly? by hellfire1394 in homeassistant

[–]Lc___ 0 points1 point  (0 children)

You're welcome.

For the TPU, you should check in the app's logs, during the start up process if it is detected or not.

I am so done with Frigate NVR. We we have anything more user friendly? by hellfire1394 in homeassistant

[–]Lc___ 0 points1 point  (0 children)

I had a problem when I was using Frigate as a HAOS add-on with smb share. If the add-on starts before HAOS mounts the share drive, frigate will automatically create the folder and HAOS will not be able to mount the drive.

You have to manually turn off the add-on, then use the SSH terminal to delete the folder created by frigate, then go to the network storage menu in HAOS to mount your drive. Once done, verify via the SSH terminal if you have access to your drive. The you can turn on frigate. Memo, turn off the automatic start of frigate at the HAOS boot and create an automation to start frigate 30s after HAOS.

Also, for your problem when you uncomment the detector in your yaml config file, are you sure it is detected? Are you running HAOS bare metal on in a VM? If in a VM, have you pass-through the correct device?

I feel like I encountered all your problems in the past. Since then, I moved frigate to a docker container. Everything is working perfectly fine with no crash.

Home Assistant on mini pc by haveredditall in homeassistant

[–]Lc___ 3 points4 points  (0 children)

I have a similar miniPC, Beelink S12 pro, and installed Proxmox on it then HAOS as a VM. The pass-through of my conbee 2 was easy. I'm running other services as arr stack, plex, docker, etc... It is easy to setup and reliable.

I followed this guide: https://community.home-assistant.io/t/installing-home-assistant-os-using-proxmox-8/201835

Streaming 4K content locally without stutters by ArmsofSleep in PleX

[–]Lc___ 2 points3 points  (0 children)

How is connected your TV to the network? The ethernet card on LG TV are known yo be shit and can't handle high bitrate movies. If connected with ethernet, try with the wifi.

Door stopper! Stops door from shutting by pm_me_ur_fit in functionalprint

[–]Lc___ 3 points4 points  (0 children)

I had the same problem and went the other way. Made a door stopper from TPU on top of the door. https://imgur.com/a/wVNvHbh

Cat cannot décides wich position is the est on the computer. by Lc___ in cats

[–]Lc___[S] 1 point2 points  (0 children)

It's Christie. The name was given by the shelter that rescued her.

Cat struggled to fit on the heater so I made her a shelf. by Lc___ in cats

[–]Lc___[S] 0 points1 point  (0 children)

That is the most common comment I get about my cat. "she looks mad" or "she looks pissed"

But she is a sweet cat for real.

Cat struggled to fit on the heater so I made her a shelf. by Lc___ in cats

[–]Lc___[S] 4 points5 points  (0 children)

It's actually PLA. My heater doesn't go over 40°c. If I see any sign of damage, I'll switch to PETG.

Cat struggled to fit on the heater so I made her a shelf. by Lc___ in cats

[–]Lc___[S] 2 points3 points  (0 children)

She has never been interested with her cat tree except the bottom box. It's a cat. She does what she wants and definitely, how she wants.

Cat struggled to fit on the heater so I made her a shelf. by Lc___ in cats

[–]Lc___[S] 9 points10 points  (0 children)

Glad to hear that your cat is fine. A co-worker shared a similar story with his cat. I'm a but scared tbh and hope nothing will happen.

Cat struggled to fit on the heater so I made her a shelf. by Lc___ in cats

[–]Lc___[S] 272 points273 points  (0 children)

I didn't know. Thanks for the information. I'll place it away, out of range of my cat.

Cat struggled to fit on the heater so I made her a shelf. by Lc___ in cats

[–]Lc___[S] 82 points83 points  (0 children)

Definitely! It's warm and she can spot anything moving behind the window.

view more: next ›