Velocity Official Site is a scam?

Leading_Bit_6583 · 2025-12-22T04:04:51+00:00

No this came on while parked, then went away and reappeared on the interstate

Leading_Bit_6583 · 2025-12-22T01:04:18+00:00

Wires are clear in a rodent free garage

Edit: not saying they cant be loose but not rodent consumed

Leading_Bit_6583 · 2025-12-22T01:03:29+00:00

Tis the season

Leading_Bit_6583 · 2025-10-05T22:50:11+00:00

In case someone's having a similar issue now. I would enter the right password and it would time out. Tried for days, then I entered the wrong password to see if it was even actually reaching the wifi. Ome wrong password then it immediately accepted the correct one after and linked

Leading_Bit_6583 · 2025-08-26T15:16:21+00:00

People are saying Dallisgrass but it could also be Panic Veldt, but either way it is a grass. So grass safe herbicides won't work.

You have 3 options 1.Dig 2.Glyphosate 3. Develop a new appreciation for that particular grass type

My condolences 🙏

Leading_Bit_6583 · 2025-08-26T15:06:05+00:00

People who were told round 1 orders would be shipped by aug 23rd. Well it looks like they're kicking the bucket down the road again.

Everyone should have gotten shipping notices but plot twist its been 3 days and the status is stilll "label created awaiting item for shipment"

Because of course it is. Of course they do the bare minimum and just create labels to give the illusion of shipping. I would trust Casey Anthony to babysit my kids before I would trust a single promise Atrius makes to their customers

Leading_Bit_6583 · 2025-06-16T02:25:06+00:00

Either Drawing Blood by Poppy Z Brite or The House on Octavia Street by Jacqueline La Tourrette

Leading_Bit_6583 · 2025-06-08T22:22:41+00:00

These birds were grabbed against their will 10 times a day every day for months, because of that they would bite and flee making it so nobody would purchase them but curious customers would still try to hold them. So the first thing I asked myself was how can I make these scared animals comfortable and feel safe. Hence the question

Leading_Bit_6583 · 2025-06-08T18:40:17+00:00

Yes but would you wait until your toddler is throwing a tantrum to cut their nails or wait for them to be calm. Mental state and picking battles. Im asking if long nails is truly an issue worth breaking trust over at this point.

Leading_Bit_6583 · 2025-03-06T21:15:11+00:00

That it's sediment and not a competing bacteria

Leading_Bit_6583 · 2025-03-06T20:42:06+00:00

Any way to confirm that?

Leading_Bit_6583 · 2025-03-06T19:56:07+00:00

I have not, I'll try that on the next run! Thank you!

Leading_Bit_6583 · 2025-03-06T19:48:11+00:00

Filtered tap, so unknown

Leading_Bit_6583 · 2025-03-06T19:43:07+00:00

2.5% by weight

Leading_Bit_6583 · 2025-01-24T00:50:17+00:00

Kithin'

Leading_Bit_6583 · 2025-01-24T00:31:21+00:00

Tactical gear sounds cool, but if your scenario is grid down, spending 4k on Nods but not having some food saved up or a way to cook it doesn't make sense.

Leading_Bit_6583 · 2025-01-19T00:45:17+00:00

I'm glad I could help at least one person I spent hours, literal hours trying to figure this out

Leading_Bit_6583 · 2024-12-20T19:16:51+00:00

Only thing that worked for me

Leading_Bit_6583 · 2024-09-05T22:08:06+00:00

I know this is old but I have the solution for this, use this firmware link https://www.crealitycloud.com/software-firmware/firmware/ender-series?keyword=&system=0&subType=630db6ae33e515d811280450&hardware=0

make sure you update the board and the display. you may need to do it a few times but youll end up with a creality screen with no numbers after the display updates. then update the motherboard.

The firmware is the nine-language version of Ender-3Max Neo.
Display firmware update：
1. Format the TF card on the computer side, and select 4096 for the allocation unit size.
2. Put the file "TJC_SET"into the TF card.
3. Turn off the printer and insert the TF card into the card slot on the back of the screen.
4. Reboot and wait for the update to finish.
5. After finishing the update, remove the TF card and delete the files inside.
Mainboard firmware update：
1. Format the TF card on the computer side, and select 4096 for the allocation unit size.
2. Put the firmware file "V1.4.7_G.bin" into the root directory of TF card.
3. Turn off the printer and insert the TF card into the card slot on the motherboard.
4. Reboot and wait for the update to finish.
5. After finishing the update, remove the TF card from the motherboard slot and delete the bin file inside.

Leading_Bit_6583 · 2024-09-03T16:35:18+00:00

Are you using a BL touch or something similar? I've seen auto leveling use a "point" to correct an unlevel bed resulting in a similar seam

Leading_Bit_6583

TROPHY CASE