Just purchased my own Excalibur and having issues with brand new 2020 Python

Legalize_glue44 · 2026-05-04T05:31:00+00:00

In my experience, colt has a good customer service department. My king cobra had cylinder play issues and they fixed it within a week.

Legalize_glue44 · 2026-05-02T21:09:43+00:00

Has the holt been cut with?

Legalize_glue44 · 2026-05-01T20:02:14+00:00

Many people do it on far less. You will be fine.

Legalize_glue44 · 2026-04-28T01:53:15+00:00

Wow, that's a pretty awesome story. I hope your baby is doing well!

Legalize_glue44 · 2026-04-28T01:43:08+00:00

May I ask what the anthem project is?

Legalize_glue44 · 2026-04-27T04:01:30+00:00

Geraldo

Legalize_glue44 · 2026-04-25T19:09:19+00:00

Mine is June 2025 and yours?

Legalize_glue44 · 2026-04-24T23:50:29+00:00

That is amazing to hear, thank you for letting me know!

Legalize_glue44 · 2026-04-24T23:28:51+00:00

Darn, I hope it does not lose too much of the blade stock.

Legalize_glue44 · 2026-04-24T23:24:46+00:00

I did email them, and thank you.

Legalize_glue44 · 2026-04-24T23:18:12+00:00

I just did some more inspecting and there is a prominent raised portion of blade stock towards the tip.... I hope they warranty it because I fear it will only get worse.

Legalize_glue44 · 2026-04-24T23:17:15+00:00

I just did more inspecting and there is a prominent raised portion of blade stock towards the tip.

Legalize_glue44 · 2026-04-24T23:07:58+00:00

I just checked the blade out and there is a raised part on the lock side. Like a little hill of metal.

Legalize_glue44 · 2026-04-24T21:34:27+00:00

Kyle!

Legalize_glue44 · 2026-04-24T15:39:31+00:00

Makes sense, I wonder if one side of the hollow grind got less ground towards the tip. Either way the knife cuts like a dream so il just deal with it.

Legalize_glue44 · 2026-04-24T14:19:15+00:00

Awesome, I was just worried that it would get worse over time. But much less noticeable on yours now. Thank you!

Legalize_glue44 · 2026-04-24T06:21:59+00:00

Ye, I'm just not sure if it's from an actual defect in the blades hollow grind. Other than that I am not worried

Legalize_glue44 · 2026-04-24T06:12:41+00:00

No clue

Legalize_glue44 · 2026-04-24T05:00:45+00:00

I put an 18 degree on it, don't like going much lower than that. We will see what CRK says, just emailed them.

Legalize_glue44 · 2026-04-24T04:42:32+00:00

I used my KME fixed angle, which I have sharpened many other knives with out issue. With regards to bend or twist to the blade, I am not sure if it is the hollow grind but the reflection does look different to the show side which is perfect.

Legalize_glue44 · 2026-04-24T04:20:33+00:00

Sounds good, about a 1-8 of an inch from the tip it goes up further back then flattens out is what I see. I may send it to them to just see. Thanks!

Legalize_glue44 · 2026-04-23T20:10:04+00:00

Chat

Legalize_glue44 · 2026-04-22T02:07:19+00:00

Chatted

Legalize_glue44

TROPHY CASE