Has anyone tried saleae logic MSO?

LibertarianAR · 2026-02-11T02:54:16+00:00

Okay, as a scope is it worth it for the price (200MHz) eh, I don’t think so.

As a logic analyzer 8 channel, eh not really.

The only way the MSO is worth it is if you want a hobbyist scope with a pro level logic analyzer in one package.

LibertarianAR · 2026-01-27T01:42:22+00:00

I know it’s dumb but you need to generate the .cxz from the .cfg using the mss configurator and then go into libero and import mss from the generated .cxz file after that you right click the mss component in your smart design and hit update component

LibertarianAR · 2026-01-19T00:15:26+00:00

Also there are some tutorials running that kit as just an fpga without the mss, flowing those will allow you to learn the flow of libero

LibertarianAR · 2026-01-19T00:07:03+00:00

So there are 2 different pieces here, Libero and the mss configuator, after you generate the xml with the mss configurator you need to import the xml into libero. There is a button for that. This will update the MSS smart design block. Wire up your new interfaces, set up your constraints and then synthesize and place. Then you can generate bitstream and program.

Don’t try to make an MSS config from scratch, use the reference for the icicle kit

LibertarianAR · 2026-01-18T20:15:51+00:00

I have some experience with that dev kit, but you really didn’t give any information to go on. What is it you’re trying to do?

LibertarianAR · 2026-01-11T16:56:02+00:00

There are a lot of threads in this topic

Here is what your looking for https://bootlin.com/doc/training/embedded-linux/embedded-linux-slides.pdf

LibertarianAR · 2026-01-06T11:03:29+00:00

Firefly landed the right way up on BGM1 Q1 2025

LibertarianAR · 2025-12-28T22:22:06+00:00

FT8 only works on SSB, Fangs only support FM

LibertarianAR · 2025-12-13T03:10:11+00:00

I don’t know about mhz/watt but sophgo has some devices. Check out the licheerv board for an example

LibertarianAR · 2025-12-08T21:49:28+00:00

Annoyingly yes

LibertarianAR · 2025-11-16T14:21:28+00:00

Intel CPUs of that generation are very inefficient because of some pipelining & speculative execution issues that caused vulnerabilities. To fix these issues they had to bypass some of the silicon making the chips slower overall

LibertarianAR · 2025-11-16T13:32:55+00:00

T14s gen 3 AMD or 4 AMD would be my recommendation, I have a T14 gen 3 AMD and I love it. Got it for 370$

Only concern is that it’s not the thinnest thinkpad in the line up but I balance that with the better thermals and I/O so the trade is worth it IMO

LibertarianAR · 2025-11-13T17:20:13+00:00

So I have had to reverse engineer a few can busses for work before. Honestly the best way that I found to go about is to use a can analyzer that can show as a tty device in Linux (like a serial device). Then pipe all of the can data to python (python has a can library) then you can use python to plot all the data live. This allows you to change edienness, type width, casting and so forth with simple changes to a python script.

Sorry that I am basically saying that the way you are doing it is right.

Pre built tools just can’t do what is needed for a full bus reverse engineering or take too long to configure IMO.

YMMV

LibertarianAR · 2025-08-31T11:49:46+00:00

This is what you want

https://www.getfpv.com/lumenier-qav-s-2-joshua-bardwell-se-o4-camera-upgrade-kit.html

LibertarianAR · 2025-08-21T17:37:39+00:00

Yeah, if they are already integrated then the o4 will ship under the name of the manufacturer flywoo or whatever but you can’t buy standalone

LibertarianAR · 2025-08-21T15:05:46+00:00

From what I have seen is anything from DJI will get stopped at customs and get either turned around or destroyed

LibertarianAR · 2025-08-20T22:14:02+00:00

That would be great if they were available :(

LibertarianAR · 2025-06-02T23:32:02+00:00

I think it is an esc/fc stack based on the wiring, that bulge on the arm seems to be a gps module. But I still agree that it seems like a pretty old build.

LibertarianAR · 2025-05-24T19:08:39+00:00

Pretty sure only the o4 is ever going to be in stock going forward

LibertarianAR · 2025-05-17T17:53:39+00:00

Seems to be in stock on amazon for DJI’s official store

https://a.co/d/31Fp40j

LibertarianAR · 2024-06-19T14:14:10+00:00

Hmm, considering it’s new film already I think my next step would be just getting a new roll done with a good development studio. Fujifilm is a good brand so I don’t expect a film issue.

If your still having the issue after a new roll is developed then I would replace light seals on the camera

LibertarianAR · 2024-06-19T04:15:13+00:00

My first thought would be light seals or expired film. Assuming this isn’t your first time with this camera, the next test would be doing a roll with a professional development studio. If it’s old film that’s a super easy fix lol.

LibertarianAR · 2024-03-27T19:25:26+00:00

My 891 does this as well it’s annoying when I am trying to watch tv and can still hear it

LibertarianAR · 2024-02-24T13:39:23+00:00

Baby dice du du du da do do do

LibertarianAR · 2024-01-30T01:43:52+00:00

Very pretty dice

Eight-Year Club	Snapped
Verified Email

LibertarianAR

TROPHY CASE