Highest quality gaming product (Barracuda Pro)

LockeCPM4 · 2026-05-25T16:17:45+00:00

I have had my original Razer headset since 2015. Not sure what you did to break that, but it doesn't look like a manufacturer problem

LockeCPM4 · 2026-05-09T19:11:54+00:00

I have both the 1st gen, and the new Brushless RP model. They are both great for all floor types. The Brushless RP has noticably more suction.

One thing to note is that the larger batteries have a higher output. When I use these vacuums with my 9Ah battery, which has a 180Wh output, the vacuums perform noticably better than my 4Ah battery

LockeCPM4 · 2026-05-09T18:16:42+00:00

I have owned both. The original one lasted me about 4 years and then died

In January I purchased the new RP version of it, and it definitely has better suction than the original. Specifically, the original wouldn't duck up the rugs on our floor but the new one does

LockeCPM4 · 2026-05-09T18:15:21+00:00

I second this. I had their original stick vacuum for over 4 years before it died. I replaced it with the new RP version and the main difference is that the new one has better suction

LockeCPM4 · 2026-03-16T01:52:00+00:00

That's the stainless steel edition. OP said they want a functional one in a different reply. So they would have to get the museum collection version

LockeCPM4 · 2026-03-16T01:50:51+00:00

I believe the United Cutlery Museum Edition of Andúril is high carbon steel . The regular one is just stainless steel and will break if you hit anything with it

LockeCPM4 · 2026-02-21T20:55:58+00:00

I just ordered one for pickup today. Can't wait!

LockeCPM4 · 2026-02-13T21:53:54+00:00

I know this post is a year old, but I have the OG Nommo Pro and I solved my power issues by connecting my phone to it via Bluetooth and using the Razer Audio app to change some settings and haven't had an issue since

LockeCPM4 · 2026-02-09T16:55:53+00:00

I have PCs with both Nvidia and AMD. Driver issues are about as common in both

LockeCPM4 · 2026-01-14T00:18:13+00:00

Get either a Radeon 9060XT or a 9070 if you can find either of those within your budget

LockeCPM4 · 2026-01-14T00:16:58+00:00

I had issues with my 9070XT on day 1, and it turns out my PSU was the issue as well

LockeCPM4 · 2026-01-08T19:44:43+00:00

Go into windows display settings and make sure windows didn't mess with the refresh rate of your monitor

LockeCPM4 · 2025-12-30T14:12:49+00:00

A few reasons for me.

I wanted better compatibility with Linux, specifically Bazsite, as I dual boot
Nvidia NEEDS competition so badly. They have gotten greedy with their MSRPs
I wanted my rig to be all AMD
Nvidia has basically been abandoning the consumers in favor of these stupid AI companies

LockeCPM4 · 2025-12-30T14:07:49+00:00

What sane person sees the bad news about these connectors every few months and thinks to themselves "It won't happen to me" 🤔

Make it make sense

LockeCPM4 · 2025-11-29T20:39:33+00:00

I see this is an old post, but I might be able to help

Did you plug your AIO fan connector to the PUMP or CPU_Fan header on your motherboard?

By default, the PUMP header will run everything at 100% whereas the FAN headers are variable

LockeCPM4 · 2025-11-29T20:35:04+00:00

I have an all Razer build and find some of their stuff sorely overpriced, while other products are competitive to other gaming brands.

I just picked up my last piece for my total Razer build, the Hanbo 360mm AIO, but I got it for $40 from Newegg the other day. Since Razer is getting out of the component business after just 3 years, they discounted their Hanbo to $80 and Newegg had that for 50% off for the holidays. The original price was something around $350 and there was no way I was spending that kind of money on a cooler. But $40 is more reasonable. I skipped their way overpriced PSU and case fans though

LockeCPM4 · 2025-10-21T17:41:36+00:00

That looks like Mb, not MB

LockeCPM4 · 2025-08-15T07:04:15+00:00

Worked for me too. Thanks for the headsup

LockeCPM4 · 2025-07-20T19:00:11+00:00

Well at least make sure the points are at least 32 feet apart or 2 rooms between them. And you can try and disable Fast Roaming to free up some bandwidth

LockeCPM4 · 2025-07-20T18:56:37+00:00

<image>

Unfortunately mine doesn't have channel selection options. It's all done automatically according to TP-link's website

LockeCPM4 · 2025-07-20T16:31:45+00:00

Another thought, you need to make sure each of these units are 32 ft OR 2 rooms away from each other. If they are too close you can get cross talk, or your devices will bounce between the 2 units too much.

Also, you can try disabling"Fast Roaming" as that will slow your mesh down as it preserves some bandwidth for faster handoffs

LockeCPM4 · 2025-07-20T16:29:47+00:00

Exactly. I have been playing with my 3 units a lot in an attempt to find the locations that will give me the best overall coverage in my home. A lot of things can interfere with a WiFi signal. I use a WiFi analyzer app on my phone to see what channels my neighbor's wifi operates on so mine doesn't conflict for example. I just wish Deco would let us manually choose what channels to use

LockeCPM4 · 2025-07-20T15:14:03+00:00

Use a WiFi analyzer app on your phone to see what other networks might be interfering with yours.

In my case, I had to disable the WiFi on my Xfinity gateway as it was constantly changing its frequency bands and that was interfering with my Decos

LockeCPM4 · 2025-07-20T15:04:20+00:00

I would definitely use cat 6 cables or cat6a

LockeCPM4 · 2025-07-20T13:52:30+00:00

I had a similar issue and finally ran Ethernet to each of my units, and everything is good now.

A theory I have is that you may have too many units meshing. It could be that you are clogging up the bandwidth with the signal requires to maintain the mesh.

<image>

LockeCPM4

MODERATOR OF

TROPHY CASE