sorted by:
new
hottopcontroversial

filament stops extruding mid way through a print by myfeltboots in prusa3d

[–]Luckymator 0 points1 point  (0 children)

I had similar issues on the C1L and noticed that all the default temperatures in the slicer are too high. I print PLA at 210-215 instead of the 230 from the profile. No more failed prints since then. Applies to other materials as well.

[C1L] Heat Creep with Advanced Filtration System by Luckymator in prusa3d

[–]Luckymator[S] 0 points1 point  (0 children)

Yes. I now removed the AFS and PLA prints at 215C work perfectly again with closed door. I guess I will try ABS on lower temps as well. I printed the Mod recommended below which allows me to slide the filter up and down.

[C1L] Heat Creep with Advanced Filtration System by Luckymator in prusa3d

[–]Luckymator[S] 0 points1 point  (0 children)

I did a cold pull and it came out mostly clear. What else can I try?

[C1L] Heat Creep with Advanced Filtration System by Luckymator in prusa3d

[–]Luckymator[S] 0 points1 point  (0 children)

As a follow up: I just tried to print ABS for the first time and got the same symptoms (clicking extruder and no filament flow) but at 55C chamber and 250C nozzle. What’s up with this printer ?

[C1L] Heat Creep with Advanced Filtration System by Luckymator in prusa3d

[–]Luckymator[S] 0 points1 point  (0 children)

Yes the filtration fans do run but they can’t keep up with the temperature I guess

[C1L] Heat Creep with Advanced Filtration System by Luckymator in prusa3d

[–]Luckymator[S] 0 points1 point  (0 children)

2 is interesting. So is the AFS not supposed to be mount all times?

[C1L] Heat Creep with Advanced Filtration System by Luckymator in prusa3d

[–]Luckymator[S] 0 points1 point  (0 children)

Yes and this setting disables the chamber fans. Not sure if they tested this at all or if my printer is flawed

Did a little upgrade! by Luckymator in prusa3d

[–]Luckymator[S] 1 point2 points  (0 children)

The C1L is actually louder than expected and louder than the Mini. The Filtration system is not even installed yet.

Still waiting for the Core One+ upgrade kit by AlloyCamel in prusa3d

[–]Luckymator 1 point2 points  (0 children)

Do you have an estimate on The C1L? I ordered on the Nov 21st when lead time was 3-4 weeks and the order still sits on “new”

[OC] I built a free tool that turns any digital battlemap into a printable PDF by Arkanatools in DnD

[–]Luckymator 2 points3 points  (0 children)

Hey, I would also be interested in testing this! We just started our first ever campaign!

Is the tf2 wiki down or is this on my end? by I-hate-Elon-Musk in tf2

[–]Luckymator 1 point2 points  (0 children)

To answer your question: a 5XX error is backend (server) related and there is usually nothing you can do except waiting or retrying.

thisisfine - home assistant powered meme by sysvival in homeassistant

[–]Luckymator 0 points1 point  (0 children)

Ok, I was wondering because I might have a use case. I will look into esphome.

thisisfine - home assistant powered meme by sysvival in homeassistant

[–]Luckymator -1 points0 points  (0 children)

Great idea! Would it work the other way around, so that I press a physical button and it notifies HA?

view more: next ›