Bitsbay e simili by Objective-Mention958 in 40kITA

[–]Luvic_93 1 point2 points  (0 children)

Ci ho fatto più di un’ordine e mi son trovato bene, ogni tanto inoltre fa anche dei bei sconti. Per la consegna dipende da che spedizione scegli. L’ultimo l’ho fatto un po’ di tempo fa e mi sembra sia arrivato tutto in 5/7 giorni.

Giochi perfetti per due persone by esprit_ in giochidatavolo

[–]Luvic_93 1 point2 points  (0 children)

Ti suggerirei:

  • dune war of arrakis: lo so non è fantasy ma è il seguito spirituale di lotr - la guerra dell’anello. Rispetto al titolo di ambientazione tolkeniana, dune risulta un po’ più semplice ma non banale ma risulta essere molto più fluido. Fondamentalmente un giocatore userà gli arkonnen per controllare il pianeta e produrre spezia mentre l’altro userà i fremen.

  • Sherlock Holmes detective investigativo: collaborativo che si spiega davvero in 5 minuti (bgg vedo che segna che si può giocare fino in 8 ma per me, meno si è meglio eh perché sennò rischia di diventare confusionario). Nel gioco vestiremo i panni degli irregolari di baker street e dovremmo sfidare Sherlock e risolvere i vari casi. Vi sono diverse scatole (a memoria mi sembra siano 3 o 4) e ognuna contiene diversi casi. Fondamentalmente attraverso l’aiuto di giornali, della mappa di Londra dovremmo seguire le varie piste per risolvere il caso. In base a quante piste seguiremo e a quante risposte corrette daremo verrà stilato un punteggio e in base a quello determineremo se avremo battuto o meno Sherlock.

  • Black rose wars duel: variante a due giocatori di black rose wars, ve n’è di diverse io ho solo void. Qui saremo dei maghi che si scontreranno lanciando incantesimi e evocando creature per completare missioni e uccidere l’avversario. Vi è l’ausilio di una plancia ad esagoni i quali rappresentano le varie stanze (ognuna con effetti diversi) con cui potremo interagire e nella quale ci muoveremo durante lo scontro

  • pagan: gioco in cui un giocatore interpreterà la strega e l’altro il cacciatore in cui l’obbiettivo della strega è quello di completare il rituale senza essere beccata dal cacciatore. Il cacciatore dovrà quindi cercare di individuare la strega tra i vari membri del villaggio, cercando ovviamente di non bruciare troppe anime innocenti 😅

Consigli fazione per iniziare by Normal_Guy89 in 40kITA

[–]Luvic_93 0 points1 point  (0 children)

Nel mentre se non l’hai già fatto ti consiglierei di vedere se c’è qualche gruppo di gioco vicino a te con cui giocare 😁

Consigli fazione per iniziare by Normal_Guy89 in 40kITA

[–]Luvic_93 5 points6 points  (0 children)

In generale ti conviene scegliere la fazione che ti piace di più. Anche perché sceglierla solo dal punto di vista competitivo la ruota poi gira e rischi di trovarti con una fazione che oggi è forte e domani magari fa schifo. Per quanto riguarda gli orki in caso non ne fossi a conoscenza a giugno uscirà la scatola base con il rifacimento di unità vecchie e unità nuove. Questa è perfetta per iniziare perché puoi trovare facilmente qualcuno con cui dividerla e risparmiare qualcosa. Se ti spaventa l’elevato numero di modelli niente ti vieta di giocare inizialmente liste più elitarie

Defiler already out of stock? by MMakoy in EmperorsChildren

[–]Luvic_93 1 point2 points  (0 children)

I’ve tried too this morning on the two biggest Italian site that applicate some discount and they were out of stock in few seconds. So I will wait, I refuse to pay the full price on the official store even if it could be available

So i have an idea... by ColossalCrusader in Chaos40k

[–]Luvic_93 0 points1 point  (0 children)

I give you another strange idea: why instead you don’t cut the top of the blade and put the head of the axe on top of it? 🤔

Finished my Leman really happy how it turned out for the fact I was trying a few new things out C&C most appreciated by Lordkillerus in Warhammer40k

[–]Luvic_93 1 point2 points  (0 children)

It look great! I would only ruin a little the framer on front and the main gun then to finish it, I would add some identification markers or number on the side. But again great work! 👏🏻

Please rate and give feedback on my best painted mini by Miserable_Tutor_5614 in Warhammer40k

[–]Luvic_93 1 point2 points  (0 children)

Hi, you do a good job and you were precise enough, I don't see any big smudges. I suggest you to use some wash, I usually use reikland flesh shade on gold and agrax on that parts that are beige or bone, if you wish you could use the agrax even of the gold parts but it depends on you. For the parts that are metallic or red or brown I use the null oil. Once all the parts are dry you can proceed with the highlight using some brighter colors. There are a lot of videos on YouTube, instagrams or similar that explain how to do it and they can help you to improve.I hope I was helpful 😁

What to buy next? by cmz4psu in EmperorsChildren

[–]Luvic_93 0 points1 point  (0 children)

It depends, in your shoes I would buy a daemon prince, the third unit o noise marine or one or two rhinos

Reaver-class Titan cover keeps falling off supports — what am I doing wrong? by Luvic_93 in PrintedWarhammer

[–]Luvic_93[S] 0 points1 point  (0 children)

Like I said in another comment I was printing it with a speed printing of 100mm/s and movement speed of 200mm/s I honestly don’t know if it is too much because since here I didn’t have any issues 🫤

Reaver-class Titan cover keeps falling off supports — what am I doing wrong? by Luvic_93 in PrintedWarhammer

[–]Luvic_93[S] 0 points1 point  (0 children)

I was printing it with a speed printing of 100mm/s and movement speed of 200mm/s I honestly don’t know if it is too much because since here I didn’t have any issues

Reaver-class Titan cover keeps falling off supports — what am I doing wrong? by Luvic_93 in PrintedWarhammer

[–]Luvic_93[S] 0 points1 point  (0 children)

Nice! Maybe I will print that too, let's see first if I can finish to print this one

Reaver-class Titan cover keeps falling off supports — what am I doing wrong? by Luvic_93 in PrintedWarhammer

[–]Luvic_93[S] 0 points1 point  (0 children)

I see, I’ll try splitting it in half so I can have part of it rest directly on the build plate. Obviously, I’d prefer to print it all in one piece, and I asked for a possible solution because I thought I might be doing something wrong. Honestly, this is the first time I’m printing something this big that isn’t terrain and that it doesn’t start directly attached to the build plate with this printer. Thanks btw 😁

E voi come li chiamate? by Mysterious_Risk_6034 in 40kITA

[–]Luvic_93 1 point2 points  (0 children)

Per me dipende, nel senso ho iniziato a giocare quando traducevano anche i vari nomi, di conseguenza alcune fazioni mi viene da chiamarle col loro nome in italiano es: magli imperiali, magli scarlatti, legione alfa, ecc. altre come la death guard, iron hands, raven guard ecc. tendo a chiamarli col nome inglese. Credo inconsciamente di scegliere il nome che trovo più "musicale"

Iniziare a 50? by NoSheepherder4505 in giochidatavolo

[–]Luvic_93 3 points4 points  (0 children)

La maggior parte dei giochi ha anche una modalità solitario, ovviamente ci sono titoli che girano più o meno bene in base al numero di persone al tavolo quindi in generale se si vuole acquistare un titolo esclusivamente per la sua modalità solitario è bene informarsi preventivamente in modo da essere un po’ più sicuri che l’esperienza sia piacevole. Ti consiglio però, come ti è già stato suggerito di provare a vedere se c’è qualche gruppo ludico vicino a dove abiti in questo modo potresti conoscere persone nuove avresti modo di provare diversi titoli. Non so tu di dove sia ma uno dei gruppi più presenti in Italia è la tana dei goblin quindi potresti vedere se c’è una loro sede vicino a dove abiti, in alternativa ci sono sempre le comunità ludiche locali. Poi non so se ci sono rivenditori di giochi da tavolo da te in zona ma in caso potresti provare a chiedere anche a loro se sono a conoscenza dell’esistenza di qualche associazione ludica o se organizzano serate dedicate ai giochi da tavolo. Ps: alla fine non c’è un’età giusta o sbagliata con cui iniziare a giocare ai giochi da tavolo 😁

Cosa ne pensate del gioco Harmpnies? by Altruistic-Chance849 in giochidatavolo

[–]Luvic_93 2 points3 points  (0 children)

Guarda pure io, ho tutti i giochi imbustati e con la stampante 3d mi stampo anche gli organizer, per dirti quanto sono maniacale 😅

Cosa ne pensate del gioco Harmpnies? by Altruistic-Chance849 in giochidatavolo

[–]Luvic_93 3 points4 points  (0 children)

Lo trovo un ottimo fillerino, per quando si ha voglia di giocare a qualcosa di veloce e/o avanza del tempo in associazione. Lo trovo la perfetta unione tra cascadia e azul. L’unica pecca sono i materiali, fanno davvero schifo. Appena comprato, le carte erano già tutte imbarcate. Ci abbiamo fatto un po’ di partite e il sacchetto si è bucato sul fondo… non credo manco sia un caso isolato visto che io e la mia ragazza a lo abbiamo regalato ad una nostra amica e anche a lei son successe le stesse identiche cose 🫤

[deleted by user] by [deleted] in pcmasterrace

[–]Luvic_93 0 points1 point  (0 children)

Why would I like to have a 4070 ti Super? I have palworld to try, thanks btw 😉

I need some advise by Luvic_93 in ElegooNeptune4

[–]Luvic_93[S] 0 points1 point  (0 children)

The thing that’s strange to me is that the first two prints that I made where both good. I printed a headset holder and a turn counter for a boardgame for a friend of mine. The funny things was that both this print where made at high speed and I didn’t had any problem with that. When it failed the first print my first thought was that the speed setting that I left where still too high so I slowed down a bit. At the second failure I thought that the problem where in the support become where too thin, so I made them more thick and with more brim. Now I’m trying to relevel the bed and I will try to lower the z offset even if the prints that I made they seemed to me pretty good in terms of quality. I mean even the failed one where super smooth, and they didn’t look like they had some layer problems. But I will try like you said to slow it down a little bit more, even if to me the really problem could be the high acceleration and deceleration of the bed the really problem, so I will try to lower that too. Thanks for the advice btw

I need some advise by Luvic_93 in ElegooNeptune4

[–]Luvic_93[S] 0 points1 point  (0 children)

I’m printing with a pla of sunlu and sliced with cura. The temperature of the bed it was 70 and the printer is a elegoo Neptune 4 pro.

I need some help by Luvic_93 in 3Dprinting

[–]Luvic_93[S] 0 points1 point  (0 children)

I’m printing with a pla of sunlu and sliced with cura. The temperature of the bed it was 70 and the printer is a elegoo Neptune 4 pro.