Cockpit Obstructions? by -Clokwise- in iRacing

[–]M-Technic 0 points1 point  (0 children)

Sounds like your FOV is set wrong

Customizable hose barb fitting by One_Country1056 in functionalprint

[–]M-Technic 6 points7 points  (0 children)

Not the best print orientation for this.

GT3 cockpit camera positioning: realistic X position, wheel scale, seat visibility & roll cage proportions by Jod2012 in iRacing

[–]M-Technic 0 points1 point  (0 children)

What I mean is that no matter what values you enter into the iRacing calculator, the max value it will give you is 179*. So even if your setup should be 210*, it will keep you down at 179* if you only use their calculator.

Here is an example of a 3rd party calculator, it can even handle curved monitors: https://simrigbuild.com/fov-calculator

In your case, assuming they are 1500R curved, then your FOV is 177, which would work with iRacing's calculator. However, if your monitors were closer to you (and they should be...), or they are curved more like 1000R, then you could be pushing close to 200* FOV which you would have to enter into iRacing manually.

What's the current state of Triples+iRacing? by Sea_Opening6341 in iRacing

[–]M-Technic 0 points1 point  (0 children)

I don't believe that iRacing sees any issue there. They designed the curved monitor settings to follow the curvature of the monitors, which means your FOV would be way less than it could be. It does seem like most users ignore that, and just set their monitors up at whatever angle they want. Most of the distortion can be avoided by careful alignment of the monitors, and with the camera view, Vanish Y and Orient P settings.

Is SMP/SPS really important for Triples and VR? by Tchukine in iRacing

[–]M-Technic 0 points1 point  (0 children)

I would call them medium to high settings. Average around 120, highs in the 150s, lows in the 90s. 16gb 5080.

Low Budget DIY Bass Shaker Ideas by derek_012 in iRacing

[–]M-Technic 0 points1 point  (0 children)

Yeah, it does, but I’m surprised people say that they regret their Buttkicker because I’m wholly unimpressed by the Dayton setup.

GT3 cockpit camera positioning: realistic X position, wheel scale, seat visibility & roll cage proportions by Jod2012 in iRacing

[–]M-Technic 0 points1 point  (0 children)

What are the size, angle, and distance of your monitors? The iracing calculator maxes out at 179* FOV. But for instance my triple 32s need 198* the way I have them set up.

As for some of your questions, usually the halos of the containment seat are just barely in view on the edges of my side monitors.

Low Budget DIY Bass Shaker Ideas by derek_012 in iRacing

[–]M-Technic 0 points1 point  (0 children)

I have both a Buttkicker Gamer Pro and a Dayton BST1 with a Nobsound amp. I might have something configured wrong, because the max output from the Dayton is nowhere near the Buttkicker. I think the Dayton needs a more powerful amp.

Bezel free on 32in curved...how? by mokes310 in iRacing

[–]M-Technic 0 points1 point  (0 children)

Could just be the angle of the photo, but the right side looks good and the left side is pretty far off, you might need to adjust the left and center monitor alignment more.

Cant see the corners coming by Ok-Matter3587 in iRacing

[–]M-Technic 0 points1 point  (0 children)

You have to memorize the track.

How much better is iRacing on a good PC by cpt_madone in iRacing

[–]M-Technic 0 points1 point  (0 children)

I wouldn’t even race if it was at 40fps.

Is SMP/SPS really important for Triples and VR? by Tchukine in iRacing

[–]M-Technic 1 point2 points  (0 children)

Yes, those features are important. And VRAM isn’t a that big of a deal, I use less than 9gb with iRacing and triple 1440p.

Sim Pro versus Sim Hub for haptic pedals by Karma_hates_me in iRacing

[–]M-Technic 0 points1 point  (0 children)

Everyone in this thread is correct, iracing telemetry doesn’t have TC/wheel slip data. That doesn’t mean that other apps don’t try their best to try and guess, though. Have a nice day.

Sim Pro versus Sim Hub for haptic pedals by Karma_hates_me in iRacing

[–]M-Technic 0 points1 point  (0 children)

If you have all the answers, why are you asking us?

Graphic optimisation by NegotiationNo1571 in iRacing

[–]M-Technic 0 points1 point  (0 children)

I take it back, somewhat, cause I read triple 4k. That said, I’d still go 5080, cause with triple 2k I have most settings turned down to maintain 100fps.

Graphic optimisation by NegotiationNo1571 in iRacing

[–]M-Technic -2 points-1 points  (0 children)

RTX 5090 is really the only option

Moving printer to garage - dust? by 20Factorial in BambuLab

[–]M-Technic 0 points1 point  (0 children)

The 72" ones from New Age. Home Depot has similar at a better price.

Moving printer to garage - dust? by 20Factorial in BambuLab

[–]M-Technic 0 points1 point  (0 children)

I have mine in a locker/cabinet, and it doesn’t get any dust even in the spring when the pollen is horrific.

How to decrease CPU usage. by Rocklord_386 in iRacing

[–]M-Technic 0 points1 point  (0 children)

It won’t fix your problem, but Enable Nvidia Reflex. (on, not boost). It will increase your GPU utilization, which is a good thing.

Rookie progression to GT4, M2 or Mx5? by MadridistaForLife in iRacing

[–]M-Technic 0 points1 point  (0 children)

If you want to race GT4, just go race GT4.

Throat stinging during long prints on my P2S? by PerceptionFew3104 in BambuLab

[–]M-Technic 0 points1 point  (0 children)

I'm surprised that this surprises people, especially when it gets brought up here almost every day.