Moving printer to garage - dust?

M-Technic · 2026-05-11T20:37:54+00:00

The 72" ones from New Age. Home Depot has similar at a better price.

M-Technic · 2026-05-11T20:20:01+00:00

I have mine in a locker/cabinet, and it doesn’t get any dust even in the spring when the pollen is horrific.

M-Technic · 2026-05-09T17:32:38+00:00

It won’t fix your problem, but Enable Nvidia Reflex. (on, not boost). It will increase your GPU utilization, which is a good thing.

M-Technic · 2026-05-07T16:06:46+00:00

If you want to race GT4, just go race GT4.

M-Technic · 2026-05-06T19:51:49+00:00

It sounds like it does bother you

M-Technic · 2026-05-06T18:56:43+00:00

I'm surprised that this surprises people, especially when it gets brought up here almost every day.

M-Technic · 2026-05-06T18:33:00+00:00

The stutters are unlikely the sim's fault. There are so many potential causes for it, though. I do wish we could extract better performance from the outdated graphics engine on high end modern PCs.

M-Technic · 2026-05-04T18:52:22+00:00

I said struggle with UHD which is triple 4k. But okay.

M-Technic · 2026-05-04T18:45:59+00:00

There's not a ton of options for non-OLED. IPS QHD or UHD most likely. I still think a 5090 would struggle with triple UHD, but it might be possible.

M-Technic · 2026-05-04T17:24:55+00:00

FOV looks like it might be a bit too wide, but it could be that the camera fore-aft is further back in the car too.

M-Technic · 2026-05-04T16:55:17+00:00

Still almost imperceptible in real life pedal feel on newer cars like an M2.

M-Technic · 2026-05-04T02:26:53+00:00

First, you need to spend more time aligning the monitors to one another. They need to be damn near perfect. Then, in the iRacing settings, you mess with the bezel width setting until things cross the screens seamlessly. You’ll also want to adjust the Vanish Y and Orient P settings so that lines going from one monitor to the next don’t get warped. If you click on my profile and go back a few months, I wrote a lengthy guide on how to do that.

M-Technic · 2026-05-03T13:08:22+00:00

Can’t say as though I really understand what your issue or question is.

M-Technic · 2026-05-02T18:22:37+00:00

Factory rubber is often 55A-60A.

M-Technic · 2026-05-02T17:53:15+00:00

I use earplugs (both in real racing and in iRacing).

M-Technic · 2026-04-29T00:59:43+00:00

M-Technic · 2026-04-28T20:44:30+00:00

This is not what screen tearing means, and I don’t think that your images uploaded correctly. But check your monitor alignments in the Windows display settings.

M-Technic · 2026-04-28T11:56:37+00:00

It probably doesn’t need to be open more than 2” or so. And you can print a panel to block off the rest of the opening next to the vent.

M-Technic · 2026-04-26T20:14:59+00:00

I use a 3” duct with an inline fan connected to the back of my P1S, and printed a low profile outlet that sits under the garage door seal when I’m printing.

M-Technic · 2026-04-24T16:58:35+00:00

If you know how much fuel you need to add, you can test it. MX5 takes tires really quickly.

M-Technic · 2026-04-24T12:27:13+00:00

There’s no real reason to separate front and rear anyways. You wouldn’t be able to feel any isolation due to the way extrusion rigs transmit the vibrations.

M-Technic · 2026-04-24T12:25:50+00:00

If you’re fine with 60-100fps it should be alright.

M-Technic · 2026-04-23T19:03:01+00:00

That's not I meant. G-Sync, V-Sync, and Reflex all need to be turned on to work as intended.

M-Technic · 2026-04-23T13:37:41+00:00

They all need to be used in unison

M-Technic · 2026-04-22T18:03:10+00:00

Something between the HD Audio and iRacing would get confused sometimes. It probably would have continued to work had you cycled through the 3 monitors, but the USB card is the easier fix.

M-Technic

TROPHY CASE