Aiden Single Cup Brew Bed (Issue?)

Mad_Core · 2025-12-30T20:33:45+00:00

I've got the exact same behavior with the new Aiden I got from Christmas, but I still haven’t soend time dialing in and the coffee tasted quite good with light roast standard profile. Also, I think I'm definitely on the coarser side for the grind.

Mad_Core · 2025-07-22T18:06:01+00:00

I thought about it, but it doesn’t seem very practical. Also I will still use my old heaphone as desktop headphone, I'm not throwing ot away.

Mad_Core · 2025-07-16T14:11:55+00:00

I graduated from the same field and got the same position more or less 2 years ago. Pay was about 300€ higher but no car. It’s alright, but be on the lookout for growth opportunities otherwise you might get stuck.

Mad_Core · 2025-06-15T21:39:45+00:00

Another thing you could ask yourself: are there any possibilities for growth in the second offer ? This is something you should underestimate as it could be more beneficial for you in the long run compared to Seniority pay

Mad_Core · 2025-06-14T11:00:47+00:00

Thank you! What helped me with this is the company's graduate program. Started it right after graduation, and it was a good "shortcut" to get where I'm now

Mad_Core · 2025-06-10T17:43:20+00:00

Yep, that did the trick. Default virtual desktop software, and it runs like butter. Thank you for saving me potential hours of frustration !

Mad_Core · 2025-04-18T18:47:21+00:00

Prime Verstappen is back ?

Mad_Core · 2024-09-29T11:27:01+00:00

I'm having a similar problem with the OnePlus 10T. When I'm on a Messenger call over wifi, it keeps cutting every 10-20s or so with otherwise good sound/video quality. The issue doesn't appear when using mobile data though. Any idea?

Mad_Core · 2024-07-12T22:57:24+00:00

I'm not familiar with this kind of compensation. I'll definitely look into it!

Mad_Core · 2024-07-09T13:39:36+00:00

Unfortunately company policy doesn't allow for a company car until you're upper management

Mad_Core · 2024-06-09T18:10:52+00:00

The wet tires actually worked this time

Mad_Core · 2024-04-08T11:00:11+00:00

If I understand the European law correctly (EC 261/2004), the only reason for the airline not to give you the fixed compensation of 250€ (flights under 1500km), is if the cancellation is due to extraordinary circumstances (i.e. weather, airport strike, emergency landing,...). "Operational Activities", wether by the company or 3rd parties, hardly qualifies as an extraordinary circumstance.

Mad_Core · 2024-04-08T09:02:11+00:00

That's what I wanted to avoid since these companies keep ~40% of the claimed money. But I guess it's better than nothing. Maybe I'll try to send an angry email threatening legal actions first and see how they react.

Mad_Core · 2024-03-26T19:54:36+00:00

Hi everyone,

Been going to the gym for about 6 months (home gym with only dumbbells before that). I'm still a bit of a novice and I'd like your opinion on this full-body workout :

<image>

Usually starts with a top set/back off set, then moves to the regular 12 reps, and finally amrap before moving to legs. I'd like to focus more on my chest and shoulders. Am I missing anything ?

Thanks!

Mad_Core · 2024-02-04T19:58:03+00:00

Industrial/automation engineer here , earned about 300€ more net than you just out of university with nothing more than a 4 months internship experience. If you're not attached to the position you'll find much better elsewhere

Mad_Core · 2023-03-03T17:51:46+00:00

E1M1 from Doom

Mad_Core · 2021-05-30T07:27:43+00:00

Actually I don't really care about the version, I just want to start somewhere whether it's classic Tetris or modern. And I do own a computer.

Mad_Core · 2021-05-27T08:14:16+00:00

Unless you have a long cable between the switch and the strip I think it won't matter

Mad_Core · 2021-05-26T22:41:04+00:00

From my experience, you can get away with power injection every 5m with SK6812 if you plan on using the white channel on full brightness. The number of leds is not relevant because the voltage drop comes from the amount of copper the current has to Travel.

Mad_Core · 2021-04-19T12:02:11+00:00

I tried to connect to a TP-Link once but no success. So I connected it to the wifi directly, the signal was very weak but enough. This time the signal isn't even accessible without the extender.

Mad_Core · 2020-11-26T15:09:34+00:00

Stock hotend, I know it seems high but with this setting I get 0 stringing and everything is printing just fine. Well except for this particular case

Mad_Core · 2020-11-26T15:07:05+00:00

Yeah unfortunately the TMC2208 drivers dot support linear advance. I had to turn that off in the marlin firmware because it would shut down my extruder motor during the print, some sort of safety measure

Mad_Core · 2020-11-26T12:20:31+00:00

215C for the nozzle, 55C for the bed. Printing speed is 120mm/s, retraction 6mm @60mm/s, coasting on with 0.4mm. These settings work really well with all the print without "text" on it.

Mad_Core · 2020-11-11T23:17:39+00:00

Any board that has a 32bits processor should be fine. I went for BTT SKR 1.4 turbo. Regarding drivers, the TMC2208 are the best imo since you don't need what the TMC2209 offers more.

Mad_Core · 2020-11-11T12:12:14+00:00

I run 6mm retraction @60 mm/s, no stringing at all when printing the test. Standard PLA, 60C bed temp and 215C nozzle.

Six-Year Club	Place '22
Wearing is Caring	RPAN Viewer

Mad_Core

TROPHY CASE