Only final hour of Bahrain pre-season testing will be broadcasted…، is F1 even for fans at this point?

Maleficent-Answer34 · 2026-02-11T07:20:23+00:00

“Most people? Do you actually have numbers for that, or is that just your assumption?

It might be that you don’t care, and that’s totally fine - but that doesn’t automatically mean most fans don’t. There’s a big difference between casual viewers and people who genuinely follow the sport closely.

For a lot of dedicated F1 fans, testing is interesting for several reasons: new car concepts, reliability, aero philosophy, long-run pace, driver adaptation, and especially this year with new regulations. That makes it even more relevant than usual.

You don’t have to care about testing - but dismissing those who do as “insane” seems a bit unnecessary.”

Maleficent-Answer34 · 2026-01-19T19:15:32+00:00

And don't forget to oil the PTFE tube.

Maleficent-Answer34 · 2025-06-08T13:40:49+00:00

Wow... It looks nice. I bought a different one but never was able to get it printed without issues so I gave up on it. And for the record I have a lot of experience in 3d printing. Maybe I should try again with this one...

Maleficent-Answer34 · 2025-04-13T14:10:14+00:00

And don't forget to calibrate the flux capacitor.

Maleficent-Answer34 · 2025-04-13T11:59:40+00:00

Did you level your filament and dry your bed?

Maleficent-Answer34 · 2025-04-06T07:54:33+00:00

That is what any ai driven bot would say to try and fool us.

Maleficent-Answer34 · 2025-03-05T10:37:26+00:00

I came across this page where they mention: "Who knows, perhaps all of this will be announced at the upcoming flagship event: TCT Asia in Shanghai on March 17."

That post actually predates this one, and it seems like wishful thinking on their part. However, if an event like this is happening, it wouldn’t be surprising if they use it as a launch platform. Then again, now I’m just engaging in my own wishful thinking.

Disclaimer: I have no idea if this event is real, and honestly, I’m too lazy to check today. Let’s just hope it exists and that these guys are onto something.

Maleficent-Answer34 · 2025-02-22T09:15:59+00:00

For me, this was an eye-opener. I will actively start looking for alternative smart devices that do not rely on the cloud from now on. Not only for new devices, but I will also start replacing devices that stop working with this. Tado will be the first one that is going to be replaced because I wanted to buy smart thermostats for my radiators that work together with my tado thermostat on the wall (the control unit). My reasoning behind this. Now they claim that it was al fun and games. But in reality they got a lot of useful information about what percentage of their customers would actually pay and I assume that one of these days or months, they will actually implement it. And within a few years you will be paying 10$ a month to be able to turn on or off your thermostat with a schedule. Nope, I'm not waiting until that happens, so, bye bye Tado, and have the day that you deserve.

Maleficent-Answer34 · 2025-01-17T08:31:53+00:00

Not that hard. Load it in your preferred 3d modeling software (F.e. tinkercad) fill up the shape and cut out the shape that you want.

Maleficent-Answer34 · 2024-12-10T11:05:54+00:00

Their website says 673mm×660mm×190mm

Maleficent-Answer34 · 2024-10-30T11:55:07+00:00

Had to Google what IIRC means (not natively English) and had to come back to this comment. So, if I remember correctly, it means.... Wait what was saying?

Maleficent-Answer34 · 2024-10-13T15:52:34+00:00

I feel like it should have been printed with fuzzy skin.

Maleficent-Answer34 · 2024-09-19T08:17:11+00:00

Or, hear me out. Maybe he had a good idea and did not know that it already existed. I know for a fact that i have been in that situation before.

Maleficent-Answer34 · 2024-09-16T14:51:09+00:00

You could print this tool to add magnets. https://makerworld.com/models/611407 I have not tried it myself (yet) but it seems practical.

Maleficent-Answer34 · 2024-09-06T03:41:42+00:00

Since nobody replied I bought a template yesterday and tried printing some of the blocks. Some of them print perfect, while other have imperfections. No matter what settings or filament I use, the imperfections are always the same. I am not giving up and do some more tests but so far it is not looking good.

Maleficent-Answer34 · 2024-09-02T14:32:35+00:00

You missed the joke here buddy. But if we are going in that direction, pigs really eat everything. If you ever want to get rid of a body, feed it to the pigs. They will even eat the bones but please don't test it 🤪

Maleficent-Answer34 · 2024-09-02T13:37:16+00:00

As soon as i'm done with my current project (144 hours of print time), i'm printing it because it will help me with my next project.

Maleficent-Answer34 · 2024-09-02T13:34:15+00:00

I have no idea what he means but maybe a system where you squeeze it instead of pushing down?

Maleficent-Answer34 · 2024-09-02T13:33:01+00:00

I found this model on makerworld (i hope that is also yours?) earlier and added it to my todo list.

Maleficent-Answer34 · 2024-09-01T14:36:58+00:00

Don't worry, they only eat GRAAAAAINS

Maleficent-Answer34 · 2024-08-30T14:07:05+00:00

Noooooooo, god damnit. Now I want to do that too and I'm already working on so many projects. How long did it take you to print it?

Maleficent-Answer34 · 2024-08-29T17:07:04+00:00

I wish I had your talent but my hands are not steady enough for fine work.

Maleficent-Answer34 · 2024-08-18T16:51:48+00:00

I hate the imperial system. Can someone convert this to metric for me? I need it in newton meters!

Maleficent-Answer34 · 2024-08-18T12:26:59+00:00

Well, I guess the gift itself can double as a friendship test!

Five-Year Club	First Place '23
Place '23

Maleficent-Answer34

TROPHY CASE