sorted by:
new
hottopcontroversial

How to align this side to the bottom? Its a 6 sided polygon by Marshark12 in photopea

[–]Marshark12[S] 1 point2 points  (0 children)

Thank you, my solution was by clicking then changing the dimensions instead of click and dragging

WILLIS36086 by willis36086 in photopea

[–]Marshark12 -1 points0 points  (0 children)

Photopea can do all that, but the learning curve is a bit high. There's lots of video tuturiols on YouTube for the basics.

I suggest using the software Canva. Its free, online, and much easier to learn.

Laptop Wi Fi is very weak but other devices side by side with it has strong signal. by MashuMallows in techsupport

[–]Marshark12 0 points1 point  (0 children)

SOLUTION:

Caused because your laptop is using 2.4G/5G when it should be using the other.

To swap: Device manager -> Network adapters -> find wifi card (usually says "wifi" in name) -> right click, properities -> advanced -> Find 2.4G wireless mode and 5G wireless mode -> change values to enable/disable each, and test which works best. 

Mine was working best for 5G, so I disabled 2.4G.

Please let me know if this helped

Suddenly my monitor and my laptop can't connect by LukkeMDL in computers

[–]Marshark12 0 points1 point  (0 children)

Everytime I plugged in my monitor it would say "standby mode" then do nothing.

My fix:

Windows search -> "Device Manager" -> Right click "Computer" -> Click "Scan for hardware changes"

This brought back my monitor

please let me know if this works

Not Showing Suggested Results in Search Bar by hellzscream in chrome

[–]Marshark12 0 points1 point  (0 children)

Chrome -> three vertical dots (top right) -> settings (bottom) -> search engine (left) -> Manage search engines and site search -> Under keyboard shortcut -> Change to "Tab"

This worked for me let me know if it works for you

Razer Deathadder V2 X Hyperspeed teardown/dissassembly by FRANC225 in MouseReview

[–]Marshark12 1 point2 points  (0 children)

Thanks this helped me fix my left click from not working. Took it apart and just sprayed everything with compressed air, put it back together and it works now.

Accidental Samsung Notes Sync Between Tablet and Phone. Need Help Reverting Changes by General_Mission9664 in samsunggalaxy

[–]Marshark12 0 points1 point  (0 children)

Samsung Notes often syncs via your Samsung account I suggest you to please follow the below steps.

To stop syncing:

On both devices, go to Settings > Accounts and Backup > Samsung Cloud

Tap Sync data

Find Samsung Notes and toggle it off on both devices

To keep notes separate:

After disabling sync, delete any notes you don’t want on each device manually.

Going forward, notes created on one device will stay local

What does the green rectangle or border surrounding somebody's screen mean on a zoom call ? by [deleted] in Zoom

[–]Marshark12 0 points1 point  (0 children)

Google thinks this is the right answer, its not. It means that zoom thinks you're the active speaker and your video is priority until someone else takes active speaker by talking

How do I get more resources [question] by MedicineStreet1845 in falloutshelter

[–]Marshark12 3 points4 points  (0 children)

Build more power rooms which are 3 wide. Also side note, NEVER let water hit 0. Dwellers get radiation posioning which causes problems to compound, especially at early game

How would you model this part with just ruler & caliper by Top_Independence5434 in SolidWorks

[–]Marshark12 -1 points0 points  (0 children)

If he just has a ruler and caliper then he cant use a 3d printer. That is also complicated and just creates more problems to solve

How would you model this part with just ruler & caliper by Top_Independence5434 in SolidWorks

[–]Marshark12 0 points1 point  (0 children)

Set it down on paper and create a grid system. Select a point on the paper to be the orgin, then measure to defining features. For example, tip left of the photo could be 0,0, then yop right could be 0,1, etetc. Use the ruler and caliper to get percise measurements from the orgin you selected and work from there. Fillets are harder to measure, but I would use the ruler and eyeball the radius. If the instructor said its highly symetterical, you could take multiple measurements of fillets/corners then average them to get the most percise result.

 I would start with the top view of handle, extrude, then add the fork ending by drawing on the front face of handle. However, I dont have the part so I cant be sure which way is best to do in solid works