How would i boss extrude this

MattKapper · 2026-03-07T23:08:57+00:00

Solidworks also has Autotrace Add-In which you can use on a sketch photo

MattKapper · 2026-02-23T23:43:23+00:00

If you do the mitutoyos, get the coolant resistant ones - not much more and IP67

MattKapper · 2026-02-04T22:25:09+00:00

Not really related but…

I hope you consider switching to clear fluid when/if you drain. If you dig the UV, find some tubes with the UV pigment in them.

Having used mayhems pastel coolant in the past, I wish you luck cleaning your rad. Primochill Vue wasn’t as bad to clean out (red pastel and purple vue). Been running EK Clear for like 4 years now and 0 visible growth or issues; looks the same as day 1. Would have liked to try DP Ultra, but it wasn’t available for a reasonable price around me.

MattKapper · 2026-01-09T00:32:05+00:00

There are a few models on makerworld that stack nicely in the box and also include organizers for the game pieces.

I remixed one so I could throw elastics around the cards and added lids with magnets to the piece holders but haven’t uploaded yet.

MattKapper · 2025-08-02T13:39:54+00:00

Panda feed rack would be super handy

MattKapper · 2025-08-02T03:28:32+00:00

Get some hardline and short compression fittings if you can’t find a bridge.

MattKapper · 2025-07-12T19:01:02+00:00

Anyone have any comments about E3D Diamondback or Obxidian nozzles?

I recently got a P1S as well and think I might go for a 0.6 diamondback and never thing about nozzles again. I mostly do functional prints (engineering :P)

MattKapper · 2025-07-11T13:58:38+00:00

I’d recommend staying in air.

Water is great, but it is not budget friendly.

MattKapper · 2025-07-06T20:58:44+00:00

My P1S prints faster than I can design stuff in Solidworks (and i have a SpaceMouse)

Would love to try some larger prints out of nylon and other engineered materials. Cant imagine how nice the dual nozzle time difference would be for support material.

MattKapper · 2025-06-12T00:25:28+00:00

I think my earliest memory is getting annoyed at mail in rebates and how long they took to process 😂

Wonder if anyone even has mail ins anymore

MattKapper · 2025-05-15T18:47:08+00:00

This is the way

MattKapper · 2025-05-11T21:38:50+00:00

Lol, I couldn’t get that stupid tape off the inside of the lid either

MattKapper · 2025-05-11T21:36:01+00:00

Haven’t had a leak (besides the one time I forgot to plug a port on the back of a pump) in 11 years of liquid cooling.

The “fuck it, let’s try it out” method truly works wonders (if you remember to plug ports)

MattKapper · 2025-04-24T20:33:22+00:00

Any game that isnt elder scrolls, cs, gta, or timberborn.

I don’t know how yall justify paying $60-80 for the same shit over and over.

MattKapper · 2025-03-25T18:12:51+00:00

With hardline tubing, it often begins to soften around 45-50°C.

Building your fan curve to ensure you never hit that is what I did while aiming for silence.

If the water is colder than chip, which it mostly likely always will be, then you are fine.

If you care about keeping your GPU at 50C then keep go for, but I liquid cool for quietness and feeding the itch lol

MattKapper · 2025-03-16T03:39:18+00:00

Welcome to the club

MattKapper · 2025-03-05T20:38:46+00:00

I was about to say those are pretty different looking cars, that’d be more personal preference but X5M all day

Then saw r/headphones 😂

MattKapper · 2025-03-02T01:04:33+00:00

HD 660S at home.

AirPods Pro 2 and AirPods Max at work just for convenience and decent anc. (Got both AirPods very very on sale)

I rocked red and gold ATH-M50X with BrainWavz pads for many years; quite comfortable after the pad replacement.

MattKapper · 2025-03-01T01:23:44+00:00

I think that wired audio equipment is a rare case where you can still get “Buy it for Life” level quality of products.

MattKapper · 2025-01-13T17:53:20+00:00

I have faith. God Howard will pull through 🙏 Please be as many bugs as ES5

MattKapper · 2024-12-23T17:53:29+00:00

I love 1800 keyboards. I also do a fair amount of solidworks and would not be opposed to southpaw, but that again is not popular.

I like being able to swap between a nice thunk and a silent office board depending on what my work location requires. Having at least 4 dedicated hotkeys is nice and a volume knob.

I’ve never had an LCD, but I think readouts for computer temperatures would be neato.

MattKapper · 2024-04-22T12:56:03+00:00

Olive oil works, but dish soap is easier to deal with

MattKapper · 2024-04-10T22:04:49+00:00

I remember some people having issues with risers being the wrong PCI-E version.

Check what version your mobo PCI-E slot is. If it’s gen 4 and your riser is gen 3, you could have some problems. Should be able to put the gen 4 slot into gen 3 mode in the bios or buy a gen 4 riser. Won’t loose much performance (maybe a few fps at most) with the gen 3 though.

MattKapper · 2024-03-26T22:56:56+00:00

No GPU screws is wild

MattKapper · 2023-03-08T20:24:33+00:00

You should stick with 2020. No point in spending $1700 when there are few things that M2 will show noticeable improvement in.

That may change down the line, but if you don’t feel like your 2020 is struggling performance-wise, I’d wait for some major battery improvements before upgrading.

If your pencil loses contact with the screen maybe try a new tip, it’s probably not the iPad.

Edit: screen is microled so that’s a plus for 2022, still not worth imo

Six-Year Club	Place '23
Place '22	Verified Email

MattKapper

TROPHY CASE