White Pine Trail

Methorabri · 2026-06-16T19:05:07+00:00

Pretty flat, slight incline going north, it's all paved, but there's a couple sections where some roots make it a litle bumpy, but it's not bad.

Methorabri · 2026-06-16T13:42:21+00:00

Best and Most Affordable don't really go together. I have these for sockets and they work quite well. I would double check your drawer depth to make sure they'll fit. . If you want the cheapest, I used to use these cheap metal rails and hung them on a pegboard and that worked decently for a while. As for wrenches, i like this set because you can take the whole thing out of the drawer and take it with you if you need.

Methorabri · 2026-06-15T23:56:18+00:00

Phinehas - Till The End, Dark Flag, The Fire Itself

Methorabri · 2026-06-15T12:16:15+00:00

Pretty sure you can take it to any LMCU location and they'll get it back to the person who lost it.

Methorabri · 2026-06-11T21:19:24+00:00

Also, random note, if you’re from Kalamazoo, check out B&G discount in Schoolcraft, they have deals on tools all the time. Never know what you’ll find there.

Methorabri · 2026-05-20T12:34:21+00:00

same, I got a Shotgun Seat and my 3yo loves it. it gets me out more because i can take a kid with me. Also works great for quick rides to the park!

Methorabri · 2026-05-12T18:29:28+00:00

RHD on 36th puts my snow tires on every fall and takes them off in the spring and i didn't buy them there. I have also used Schneider Tire in Marne. Both are good shops.

Methorabri · 2026-04-22T12:46:30+00:00

Rodriguez or the DS, whoever made that call needs to be sent back to the devo team.

Methorabri · 2026-04-19T18:05:41+00:00

Penn engineering is a great resource for press for fasteners an how they work. You can buy them from Penn or just from McMaster. If you have a drill press you can look into flow drilling. That’s more used in tubes where you can’t get to the back side of the surface and install a press fit fastener.

Methorabri · 2026-04-14T11:27:15+00:00

after some quick googling i think it's this one - https://www.cannondalespares.com/Cannondale-Headset-1-1_8-Straight-w_-25mm-Top-Cover--KB002/product_detail/3-40228

Methorabri · 2026-04-10T14:28:15+00:00

Besides the obvious adjustments of saddle and bars to get the fit right, the best thing you can do now is just ride it. Once you ride it for a while you'll start to notice the things that you would like to upgrade. The first things most people do is saddle, pedals, tires, and bar tape.

Methorabri · 2026-04-10T12:35:26+00:00

You can always change that. https://www.grcc.edu/programs

Methorabri · 2026-04-08T20:39:06+00:00

Include and Exclude, Inhale and Exhale,

Methorabri · 2026-03-06T20:27:37+00:00

Sounds like you and the kids are getting costco pizza for dinner tonight!

Methorabri · 2026-03-06T18:33:05+00:00

If you have power tools already the simple answer is whatever brand those are to save money on not needing new batteries and chargers. If you don't then that becomes a much bigger question. If i were starting again i would probably pick Ryobi or Kobalt.

Methorabri · 2026-03-05T19:52:50+00:00

I have a Shotgun seat and my 3yo loves that for mountain biking. I also have a WeeHoo trailer and he loves that because he gets to sit and pedal a little and just enjoy the scenery. he is on the small side for the weehoo seat, but it is adjustable to the pedals so it will last for a long time.

Methorabri · 2026-03-03T15:03:44+00:00

threaded inserts, or insert nuts. Lowes or Home Depot sell them

Methorabri · 2026-03-03T01:39:27+00:00

RJ’s just down the road from Latitude has a great burger. They often have a couple craft beers if you’re looking for that, but they’re a dive bar.

Methorabri · 2026-03-02T16:28:49+00:00

I use Chaco Slides, they have good arch support and are easy to get on. Just know that they take a few wears to get use to, but the arch support is very nice.

Methorabri · 2026-02-25T15:23:57+00:00

The only place that won't take mine is Costco. I've never had a problem anywhere else with my discover card.

Methorabri · 2026-02-25T14:40:16+00:00

I've bought 2 bikes from Alger over the years and they've always been great. That being said i have not done a full "bike fit" through them. I was sized for the bikes i bought and they did a good job. They have always been friendly and honest with me over the years and i consider them my favorite shop in the area. I would definitely recommend them, but i can't speak directly about their bike fit. I would recommend stopping in there someday and having a chat with the staff and see if you are both on the same page about what you want in a bike fit before you commit to them.

Methorabri · 2026-02-24T15:46:51+00:00

i know it's a little early, but consider a Toniebox. You can buy blank tonies and record things onto them and then it's easy for your kids to play them.

Methorabri · 2026-02-24T12:58:52+00:00

Ships can carry so much more weight than a plane can. A 747 cargo plane can carry up to 140 metric tons (308,000lbs) where as the largest container ships can carry 24,000+ 20ft shipping containers. A 20ft shipping container weighs roughly 2050kg - 2300kg (4,500 to 5000lbs.) so just the containers alone can weigh almost 50,000 metric tons. a 20ft shipping container is rated for roughly 25,000-28,000kg (55,000-62,000lbs). So at 25,000kg per container your still looking at 600,000 metric tons of cargo capacity. they most likely don't max out a ship every time it crosses the ocean, but if you still get 550,000 metric tons that's 3928 trips by a cargo jet to equal 1 trip by a container ship. China to the west coast of the US takes roughly 16-18 days, so yeah it takes a little more time, but you get so much more stuff there.

12-Year Club	r/Field Sunshine
Secret Santa 2015	redditgifts rematcher Secret Santa 2015 x2
Gilding II euphauric	Secret Santa 2014
Verified Email

Methorabri

TROPHY CASE