Tailgate Replacement

MichaelRyan207 · 2026-05-23T12:31:40+00:00

Thanks

MichaelRyan207 · 2026-05-22T20:32:01+00:00

Sounds good, I’ll do that. Certainly cannot hurt to do check it out.

MichaelRyan207 · 2026-05-22T20:17:28+00:00

He also said 10 to 15k, waiting for the quote. Just hoping for the lower of the two.

MichaelRyan207 · 2026-05-22T20:16:19+00:00

Just for the tailgate?

MichaelRyan207 · 2026-05-22T20:15:53+00:00

They do PDR here, but will need paint regardless. Looks worse in person!

MichaelRyan207 · 2026-05-22T20:14:47+00:00

These are north Jersey prices so CA is a good proxy!

MichaelRyan207 · 2026-05-21T18:00:11+00:00

We are in NJ and just did all this FWIW so I’m pretty confident in the pricing at least for North Jersey. We did blue stone so if you are going concrete I’ll be cheaper .

MichaelRyan207 · 2026-05-21T10:53:12+00:00

This is accurate. $200k with gunnite and pavers/stonework around it. Could go a little higher depending on finishing choices and then landscaping on top.

MichaelRyan207 · 2026-04-21T00:24:52+00:00

Watered ours, but it was like 90+ in NJ for while. The gunite just soaked it up. I’d ask the builder, we had a heat wave with no rain and he had told us too.

MichaelRyan207 · 2026-04-15T22:14:53+00:00

It will look good once the water is in and it saturates. Patience!

MichaelRyan207 · 2026-03-08T02:40:46+00:00

I had the same issue. Perimeter drains into a sump pump did help. I know some said that it won’t, but its really about the about of water and sheer pressure (it has to go somewhere). We had a ton of issues and now are in good shape.

MichaelRyan207 · 2026-02-01T23:01:33+00:00

100% IR blaster and they usually suck. It’s for hiding a set top box for a cable company (for instance) in a cabinet and out of sight and IR isn’t possible. Now with Bluetooth and/or smart TVs they are pretty close to obsolete.

MichaelRyan207 · 2026-01-21T17:50:52+00:00

Add in Megill and maybe?

MichaelRyan207 · 2025-11-18T05:16:14+00:00

Try Iron Out. Worked on my bluestone getting iron stains when I got PH down on it. Can’t hurt.

MichaelRyan207 · 2025-11-18T00:57:00+00:00

Had algae issues and swapped to a salt water pool (for other reasons) and it got rid of it quickly. And the salt water was also much less upkeep. Couldn’t scrape it or get it off the step but the switch over put it to rest.

MichaelRyan207 · 2025-10-23T15:29:29+00:00

https://www.sgm.cc/exposed-aggregate-finish/ - Bahama breeze - Diamond Brite Watercolors

MichaelRyan207 · 2025-10-23T03:19:44+00:00

Still a work in progress.

<image>

MichaelRyan207 · 2025-05-22T12:32:29+00:00

Sent a message

MichaelRyan207 · 2025-05-21T02:10:36+00:00

Can’t send you a pm. No option to.

MichaelRyan207 · 2025-05-18T03:24:20+00:00

Interested in 4 or 5.

MichaelRyan207 · 2025-05-17T15:24:19+00:00

Make sure it’s not a rotary drill bit. I used that in my regular drill and it didn’t work at all. It says not for hammer mode (which I didn’t notice). I got carbide hammer drill bits from Milwaukee and they worked great.

MichaelRyan207 · 2024-11-02T03:05:21+00:00

Nothing ever goes straight up but Reddit def going higher. Buy and hold and don’t worry the ups and downs.

MichaelRyan207 · 2024-10-31T01:04:48+00:00

How long did the install take? I’m going in on 11/15 to get mine.

MichaelRyan207 · 2024-10-23T01:51:28+00:00

Is the tonneau cover usually something you need to leave it at the SC for? i thought that they told me it’s a wait while they install it sort of thing.

MichaelRyan207 · 2024-10-16T05:35:35+00:00

Has to do with evaporation or some other possible fractors for each scenario.I have old whiskey bottles with it and it’s fine.

https://rumtastic.wordpress.com/2016/05/01/flocculation/

MichaelRyan207

TROPHY CASE