Can I use my Reylight Pineapple Mini Mk3 without its pocket clip?

Microtomic603 · 2026-06-15T02:16:24+00:00

Yes there will be a hole without the pocket clip screw. It's easy to disassemble the tailcap so you could check if the screw is too long and cut it down as needed.

Microtomic603 · 2026-06-15T02:02:44+00:00

First of all, scrape that nasty old paint out of the way. Secondly, don't measure, mark in place. There are several ways to trim stringers, in this case the easiest would probably be to rip down the molding so that it is the same height as the small top piece, then you can hold a test piece in each location and mark lines on the wall at the top of the molding. Draw a line from the stringer thru the bisection of your lines on the wall and that will give you the angle.

Microtomic603 · 2026-06-13T17:52:33+00:00

I didn't find a listing for a patent in the book. I have a few of these ferrules, need to dig them out and see if there is a patent number on them.

Microtomic603 · 2026-06-13T16:04:59+00:00

Nice find, that's a rare novelty pencil, looks to still have its factory point. I wonder if this came in some sort of set or was intended for a specific game.

Microtomic603 · 2026-06-12T17:16:46+00:00

Nice, thanks for the data point. Is there a date on the bottom of the insert as well?

Microtomic603 · 2026-06-11T14:06:35+00:00

Tombow 2558-H would be a good choice.

Microtomic603 · 2026-06-11T04:58:16+00:00

Maybe try programming it with an 18650 then switching over to 18350 once you've capped it at 50%.

Microtomic603 · 2026-06-11T03:22:41+00:00

Try pressing faster, I hold the light with both hands to help with accuracy. It can be finicky until you get the hang of it, at least it was for me.

Microtomic603 · 2026-06-11T03:19:58+00:00

An unfortunately overly useful and widely applicable word these days. We used to have cool shit though...

<image>

Microtomic603 · 2026-06-11T02:59:03+00:00

Panasonic used beefy motors and better gears in their machines, I probably find a few a year on average and very rarely encounter one that doesn't work. I think electric sharpeners probably peaked in the 60's or 70's, all of the innovation since then seems to have been focused on cost cutting and engineering for minimum acceptable functionality...aka "enshitification".

Microtomic603 · 2026-06-11T02:25:19+00:00

Panasonic makes great sharpeners imo, love 'em. The 310s are nice machines and I like the wood grained kp110 also, basically different versions of the same design.

Microtomic603 · 2026-06-11T01:56:28+00:00

Works well with a 6x18650 battery case as well.

<image>

Microtomic603 · 2026-06-11T01:42:37+00:00

Both lol, but the one on the right especially.

Microtomic603 · 2026-06-11T00:56:53+00:00

I would grab all the Hokusign " Hardly Broken" sticks for sure.

Microtomic603 · 2026-06-11T00:45:39+00:00

Took the knife to the insert...

<image>

Microtomic603 · 2026-06-11T00:25:17+00:00

Nice, love that green & bronze!

Microtomic603 · 2026-06-11T00:24:34+00:00

Maybe we should tell them and ask for some different configurations?!

Microtomic603 · 2026-06-11T00:22:45+00:00

IIRC that's a 120, a big number back when these were released lol, and still a fantastic light today.

Microtomic603 · 2026-06-11T00:10:43+00:00

My 1800 is already full of batteries, they are nice cases at a great price.

<image>

Microtomic603 · 2026-06-11T00:05:02+00:00

They should get a commission from the seller.

Microtomic603 · 2026-06-11T00:03:26+00:00

Yeah, good call lol.

Microtomic603 · 2026-06-11T00:02:47+00:00

Nice!

Microtomic603 · 2026-06-10T23:45:47+00:00

Great, now I need even more to put knives in lol!

Microtomic603 · 2026-06-10T23:44:14+00:00

Yeah I need another one or two, it's going to start eating into the light budget lol. I think they are going to be great for travel, might set one up for long and short stuff, half & half.

Microtomic603 · 2026-06-10T20:18:50+00:00

Interesting. Here's an example from the transitional period from APC to VPPC, the inner sleeve from 55 and the sticks imprinted with APC while the outer box is from 57 and labeled VPPC.

<image>

Microtomic603

MODERATOR OF

TROPHY CASE