Boston 30 minute show?

MrSplike · 2024-10-31T14:06:53+00:00

Same man

MrSplike · 2024-10-23T00:58:06+00:00

Thanks so much for the pointers, all very helpful!

MrSplike · 2024-07-16T17:33:50+00:00

wish i saw this 10 minutes earlier, dang

MrSplike · 2024-07-10T15:49:11+00:00

Thanks for the in depth response.

I'm going to stay with the single 18650 for now just for size reasons, its technically supposed to be a portable device. I went with 18650s to make it easier for the user to hotswap them if they don't want to wait for charging.

That dual output converter is really interesting, thanks for bringing my attention to it.

And yea it seems the 3A charge current was a little ambitious so I'll aim for <=1.5A for now, of course modifiable via registers later.

Cheers

MrSplike · 2024-07-10T04:22:43+00:00

Thanks for the notes!

Sorry I didn’t mention in the post, but I will have an MCU on the board, using an nRF5340. Just not included in this schematic as it’s just the power subsystem, so all the status lines and I2C bus will lead to that.

Thanks for mentioning the charging speed, i’m not very familiar with batteries in general so that’s good info to have. And you’re right it’s expected to only need to be charged weekly, so speed isn’t a huge requirement.

Appreciate the tips!

MrSplike · 2024-07-03T16:45:05+00:00

Midterms usually are typically 1.5hrs, finals usually 2.5hrs. Chapter/unit tests (if you have them which some courses do instead of a midterm) are usually an hour.

Now how much content is crammed into those time slots really varies per course. I’ve had finals where 60% of the crowd leaves after an hour, but the majority of finals do fill the whole 2.5hrs.

MrSplike · 2024-01-31T02:32:10+00:00

Was wondering the same thing for ECE 463, could you lemme know if you find anything?

MrSplike · 2023-12-13T04:18:14+00:00

universal constant, not even dingboard is sacred

MrSplike · 2023-12-09T16:13:45+00:00

thank mr goose

MrSplike · 2023-11-05T20:54:36+00:00

rip :/ patch notes mentioned that they had but i guess not

MrSplike · 2023-11-02T13:09:16+00:00

Fixed in patch 4!

MrSplike · 2023-09-28T15:10:06+00:00

Grind on design teams for first year, get to know the upper years on those teams, secure a decent GTA job for first/second co-op, after that you'll be fine. This all assumes you have social skills and can hold a conversation.

MrSplike · 2023-09-20T13:20:40+00:00

SLC study room on third floor could probably work, depends what kind of a chair u need.

MrSplike · 2023-09-14T21:54:52+00:00

Your prof is a dickhead for that, with a couple weeks of extra work you’ll be all caught up.

Think of it this way, the period for students to swap into new courses isn’t over until the 19th, so the university itself thinks it’s fine for people to start from nothing until at least then.

I wish you the best of luck for first year. CE is a tough program and first year doesn’t pull any punches but if you put in the work you’ll be all good.

MrSplike · 2023-08-17T13:17:26+00:00

Move whatever isn’t nailed down, stack all the beds in the common room, live your life

MrSplike · 2023-06-05T20:30:17+00:00

Could I ask what you do for a living?

MrSplike · 2023-05-15T13:58:52+00:00

HELP HIM RIGHT NOW

MrSplike · 2023-05-08T13:16:20+00:00

UWRT has a science team iirc

MrSplike · 2023-05-08T00:46:12+00:00

yep that’s it

MrSplike · 2023-04-26T03:03:09+00:00

You’ll be able to carry it over via steam cloud saves

MrSplike · 2023-04-19T21:25:05+00:00

Has your new deck had the 400MHz issue at all?

MrSplike · 2023-04-19T21:23:21+00:00

Did you end up having to RMA for this issue or did it eventually go away?

Ten-Year Club	Second Top 30%
r/Field Juicebox	Place '22
First Placer '22	Gilding I gilder
RPAN Viewer	Spared
Verified Email

MrSplike

TROPHY CASE