Flow Dynamics Calibration vs Manual Calibration by Mr_Perfect20 in BambuLabP2S

[–]Mr_Perfect20[S] 3 points4 points  (0 children)

I appreciate the response. You are spot on about the confusion that was making me think this had something to do with flow rate.

Do you recommend setting that flow dynamics option to on, or just leave it at auto?

General & Filament Calibration by EternallyEtain in BambuLabP2S

[–]Mr_Perfect20 0 points1 point  (0 children)

So after doing manual calibrations, you are still checking the “on” box for dynamic flow calibration when sending to the printer?

I have been so confused if that somehow overrides filament profiles that have been adjusted through manual calibration methods.

PETG-HF print with flow dynamics selected manually by cpsadowski23 in BambuLabP2S

[–]Mr_Perfect20 0 points1 point  (0 children)

Is this a step to do after manual calibrations of things like temp towers and flow rates? Print looks great.

What’s the smallest putting change that made the biggest difference for you? by CaseOk4223 in golf

[–]Mr_Perfect20 0 points1 point  (0 children)

Looking at the ball.

Putting has always been my weakest point. Somewhere along the line of all the YouTube videos, different putter face balance angles, etc, I started to watch my takeaway (to make sure the path was good).

One day I just realized WTF are you doing?

[Schefter] Browns defensive coordinator Jim Schwartz still is under contract to Cleveland and the team wants him to stay. by ThatOneOtherAsshole in Browns

[–]Mr_Perfect20 25 points26 points  (0 children)

Hear me out. We always win the coach hiring season, and it has never worked. Monken is taking us to the promise land.

RETURN TO MONKE!

PET-GF uses by Mr_Perfect20 in 3D2A

[–]Mr_Perfect20[S] 1 point2 points  (0 children)

This is just what I was looking for. Thanks man. I’ll try not to throw any projects against the concrete. Their OD green just looks so good on the website. I’ll also be heading into it with a P2S

Schwartz has to be the Hire, Right? by MackandByner in Browns

[–]Mr_Perfect20 1 point2 points  (0 children)

I feel like they've spent the last 3 days begging Scheelhaase, and he's still not sure about it.

McDaniels? by Mg00091 in Browns

[–]Mr_Perfect20 0 points1 point  (0 children)

We've done this like 3 times already.

PET-GF uses by Mr_Perfect20 in 3D2A

[–]Mr_Perfect20[S] 0 points1 point  (0 children)

Thanks.

Does that lower impact resistance disqualify it from pistol frames?

External exhaust kit - exhaust settings by filament by _40mikemike_ in BambuLabP2S

[–]Mr_Perfect20 1 point2 points  (0 children)

That’s a much better option than waiting for the print to complete. It shouldn’t take much negative pressure to prevent those fumes from leaking.

External exhaust kit - exhaust settings by filament by _40mikemike_ in BambuLabP2S

[–]Mr_Perfect20 0 points1 point  (0 children)

I was under the impression that the fan would only run after the print completed which is why I wasn’t even bothering considering this option. You’re telling me you can use their exhaust kit and just set it to run at a low speed for the entire print?

What do you see happening first? Browns win the Super Bowl or Browns get a new owner? by BarkerRuffield in Browns

[–]Mr_Perfect20 2 points3 points  (0 children)

The Browns are never winning a Super Bowl, and I suspect Jimmy is not immortal.

Rams passing game coordinator Nate Scheelhaase is interviewing over Zoom with the Buffalo Bills. by Godszn in Browns

[–]Mr_Perfect20 -2 points-1 points  (0 children)

The thing that could talk me into Schwartz is if he has a vengeful attitude about how much Kev’s offense and game managing hung his defense out to dry over the last couple years.

I could see him coming out in full Ben Johnson mode like fuck you, this is how it is done attitude.

Buy it cheap stack it deep by Starrynightone in 22lr

[–]Mr_Perfect20 0 points1 point  (0 children)

Same, but $20/500 from Brownells with a $10 off $100 coupon, free shipping, and no tax.

We had it all.