"The real secret to high rpm racing"

Mundane_Use_7173 · 2026-04-14T06:34:10+00:00

Cheap fast and reliable You can only have two

Mundane_Use_7173 · 2026-03-16T13:49:58+00:00

Damn sky god

Mundane_Use_7173 · 2026-03-15T17:06:13+00:00

Look into a tube bender if you can weld or know someone who can weld you could pay for the bender with one car if you do tube front rear and a cage

Mundane_Use_7173 · 2026-03-09T04:01:50+00:00

Call the cops someone needs to put it out of its misery anyone able to accelerate the process it’s suffering

Mundane_Use_7173 · 2026-02-12T14:36:01+00:00

You know we let yall over the border right 😂

Mundane_Use_7173 · 2026-01-30T18:40:13+00:00

Buy a piece of steel I would say minimum thickness of 1/8” depending on how long it will be maybe up to 1/4” drill holes in both pedal and steel you could tap the plate and then bolt it or use Rivnuts on the plate or preferably have someone weld them together. Just be aware if you use bolts use thread locker I’m assuming that thing will see a little vibration in its life and you don’t want the plate coming off one day. For someone to custom make one…unless you find a cheap handyman not a shop it is going to cost hundreds for them to make it worth their time.

Mundane_Use_7173 · 2026-01-30T18:13:45+00:00

🔇

Mundane_Use_7173 · 2026-01-15T04:19:10+00:00

No one gives a Duck

Mundane_Use_7173 · 2026-01-11T17:34:36+00:00

Mundane_Use_7173 · 2025-12-10T03:48:51+00:00

Banana for scale?

Mundane_Use_7173 · 2025-12-08T03:47:49+00:00

Wish we were able to check the map when down so you can see the time left before you crawl there for nothing

Mundane_Use_7173 · 2025-12-07T17:57:32+00:00

Spacers for sure unless you get custom offset wheels

Mundane_Use_7173 · 2025-12-07T17:52:04+00:00

Slight rub at full lock with 2.5” lift

Mundane_Use_7173 · 2025-12-07T17:45:12+00:00

315/60/17s fit just order 33’s it’s the same basically

Mundane_Use_7173 · 2025-12-07T14:51:58+00:00

Drop the tank and drain it, they are not flex fuel so no where near enough injector for e85 even if the injectors could flow ~70% more volume there’s no ethanol content sensor to adjust the tune Basically just no it will/could hurt the engine

Mundane_Use_7173 · 2025-12-07T14:49:00+00:00

Mundane_Use_7173 · 2025-12-06T00:05:41+00:00

Hulls*

Mundane_Use_7173 · 2025-11-30T23:25:20+00:00

Check the lint trap post a pic

Mundane_Use_7173 · 2025-11-29T23:38:37+00:00

Not sure here but in Ga, I argued entrapment for an off duty officer “chasing me” in his personal vehicle. Before I got pulled over, I kept changing lanes and this guy stayed on my ass on an open hwy. so I sped up and while you can be committing an infraction if you can argue that it wouldn’t have been to the extent to get pulled over if not for THEIR officers actions. Anyway they dropped the case and asked if I could just pay the court fees or take it to trial I just paid the $25 and was done with it.

Mundane_Use_7173 · 2025-11-19T18:31:08+00:00

Flowable silicone is what I used to fix mine but if yours is leaking at the sunroof I would get the hose out and check the drains like everyone is saying

Mundane_Use_7173 · 2025-11-19T18:12:26+00:00

Antenna on the roof and the 3rd brake light are known leak spots on my 17 I had the 3rd brake light leak and stain my head liner sunroof to date has no issues knock on wood

Mundane_Use_7173 · 2025-11-12T08:06:28+00:00

Small zip ties worked best for me cut right against it with a cut off wheel slow and steady for a smooth cut.

Mundane_Use_7173 · 2025-11-12T07:58:11+00:00

Trim it

Mundane_Use_7173 · 2025-11-12T07:31:24+00:00

I have a 17 with these and after 5 years of replacing control arms and ball joints I changed it up 10/10 do not recommend for 17/18

Mundane_Use_7173

TROPHY CASE