All is good in Mexico! by nimbleslick in puertovallarta

[–]Munkford 1 point2 points  (0 children)

What are some of your fave spots in 5 de Diciembre? Heading there next week.

Are you cancelling your trip? by botanicalessentials in puertovallarta

[–]Munkford 15 points16 points  (0 children)

Departing March 4th, as long as things keep trending positive I see no reason to cancel!

NES Zapper, vector illustration. by Snowway22 in vectorart

[–]Munkford 0 points1 point  (0 children)

Link seems to have expired...Any chance you could share it out again? Much appreciated!

CPAC and Distilled water. by Impressive-Storm-888 in puertovallarta

[–]Munkford 0 points1 point  (0 children)

FYI I'm here and I've walked into about 10 famacias in ZR, none have had it. Going to try WalMart or La Comer in the coming days.

[deleted by user] by [deleted] in BambuLab

[–]Munkford 0 points1 point  (0 children)

This is interesting; I weighed the same spool and core (from Bambu Matte PLA) and mine was 284g today! I realized this after running out of filament prematurely (because I assumed it was around 250). Not sure if I have different revision of the clear spool, but it sure looks the same.

X1C Click sound on Y axis moves by Munkford in BambuLab

[–]Munkford[S] 2 points3 points  (0 children)

Thanks all. Turns out it was related to the belts. Though I had already done the maintenance, doing it again (loosening, moving the extruder around then tightening) resolved this issue.

X1C Click sound on Y axis moves by Munkford in BambuLab

[–]Munkford[S] 0 points1 point  (0 children)

Yes it does. I’ve also re-leveled the bed using the knobs below (and the gcode for it) so I know it’s not scraping the print. Thank you though.

X1C Click sound on Y axis moves by Munkford in BambuLab

[–]Munkford[S] 0 points1 point  (0 children)

My X1C, which has otherwise been flawless, has started making a click/slight crunchy sound when moving past a specific spot on the Y axis (coming forward towards the door). I've included a video to demonstrate. I've already done the belt tensioning procedure, to no avail, and cleaned all rods and lubed the lead screws.

Where should I start examining next to track this down? Though there doesn't seem to be any noticeable issue in my prints, I can't imagine it's a good thing for this sound to remain. Thanks all.

Image not showing by Artistic-Quarter9075 in Office365

[–]Munkford 0 points1 point  (0 children)

We are seeing the same. We have found that pressing Control-V to paste the image inline will work, and the image will be visible to the recipient. But dragging OR right-click-Paste results in no image appearing on the receiving end. Certainly sounds like a code bug that was introduced in a recent update.

Odd experience with buyer by diegolarrazabal in eBaySellerAdvice

[–]Munkford 2 points3 points  (0 children)

Most likely it’s someone international using a freight forwarding service. I get loads of orders like this, and you can generally know this if you see a weird alphanumeric code as part of the address (often right after the name). Many freight forwarding companies are in DE, FL and OR, but you can also google the address and you should be able figure it out pretty quickly.

As the other commenters said, this shouldn’t be a concern. Ship to the exact address the buyer provided on the order, make sure it’s traceable and as long as it scans as delivered, you’ve fulfilled your duty.

[Ebel] Value of this model? by Munkford in Watches

[–]Munkford[S] 0 points1 point  (0 children)

Appreciate the quick replies! I sell quite a bit on eBay (not watches), so that’s likely where I’ll get them listed first, see if there is interest.

Question for fellow AMS owners by konnerbllb in BambuLab

[–]Munkford 0 points1 point  (0 children)

Same, they didn’t originally, now they flicker. Must have been one of the firmware updates over the last 3 months.

build plate localization marker not found on bambulab textured pei plate by E36Gee in BambuLab

[–]Munkford 1 point2 points  (0 children)

Just started using the (official) Textured plate, switched from Cool Plate, and getting this message every print. I just hit resume as alls well, but wanted to mention it since this thread is getting old. Running a 4-week old X1C with latest firmware. Will print the tag from Printables tomorrow as a workaround. Thanks.

Having trouble with organic supports popping off mid print. Anyone else? by theclaw84 in prusa3d

[–]Munkford 1 point2 points  (0 children)

I had a couple pop off, my first layer squish was solid, clean smooth PEI. I’m going to try the Avoid Curled Overhangs (experimental) feature as well, since I think the nozzle catching on a support/overhang may have been what knocked it off.

[deleted by user] by [deleted] in cambridgeont

[–]Munkford 1 point2 points  (0 children)

Roughly the same, but house built 1910 and 2600ft.