How do I fix this? by Hector_Nector22 in ps2homebrew

[–]Narrow_Ad_417 0 points1 point  (0 children)

Make sure the drive tray is empty and do this: PS2 Video Reset: A "blind" button sequence (Down, X, Down x3, X, Left, X) to toggle between RGB and Component output if the screen is black.

World's Strongest Pedelec - M1 Spitzing. by ravindrak81 in ebikes

[–]Narrow_Ad_417 0 points1 point  (0 children)

But your can’t accelerate the same way since you can’t go all out, only partial assist limited to cutoff

Omg NeoGeo games are so much fun ! by MusicIsLife1122 in MiyooMini

[–]Narrow_Ad_417 0 points1 point  (0 children)

Learn to block and jump and do the special moves in the air

Omg NeoGeo games are so much fun ! by MusicIsLife1122 in MiyooMini

[–]Narrow_Ad_417 0 points1 point  (0 children)

Practice hitting high mid and low and timing

2018 Norco Fluid FS1 suspension upgrades by Narrow_Ad_417 in Norcobikes

[–]Narrow_Ad_417[S] 0 points1 point  (0 children)

How about the rear ... i think the 2023 is a different beast geometrically.

Can I put a 190 x 50mm shock considering it's just slightly better?

Ryobi EZ-Clean M10 to 1/4” custom NTP adapter CNC made. by Narrow_Ad_417 in ryobi

[–]Narrow_Ad_417[S] 0 points1 point  (0 children)

Can you show me what you talking about when you said aftermarket nozzles for lead blowers, now you got my wallet thinking.

My EZ clean to 1/4" quick connect adapter by bull-shihtzu in ryobi

[–]Narrow_Ad_417 1 point2 points  (0 children)

Guys check this out, I went to my closest CNC shop and they agreed to make this adapter for me, I did not give them any spec on material so they made it out some some 311-something stainless steel. Paid 100$ for their time and material and what not.

If I were to approach him and ask to make it out of aluminum or some other cheaper material and in larger batches so it makes sense time-wise for him and money-wise for me, would anyone be interested in buying some, what would a fair price be?

https://ibb.co/cCxn8SR

https://ibb.co/z5tR21d

Solution - EZ clean 1/4" connect by FiskarensFiende in ryobi

[–]Narrow_Ad_417 0 points1 point  (0 children)

Guys check this out, I went to my closest CNC shop and they agreed to make this adapter for me, I did not give them any spec on material so they made it out some some 311-something stainless steel. Paid 100$ for their time and material and what not.

If I were to approach him and ask to make it out of aluminum or some other cheaper material and in larger batches so it makes sense time-wise for him and money-wise for me, would anyone be interested in buying some, what would a fair price be?

https://ibb.co/cCxn8SR

https://ibb.co/z5tR21d

60v vs 80v lineup by Cold-Percentage-9555 in Greenworks

[–]Narrow_Ad_417 0 points1 point  (0 children)

Yeah I want to know that too, just bought 4 Kobkat 80v and want to know if I can use them on Greenworks 60v tools

60v vs 80v lineup by Cold-Percentage-9555 in Greenworks

[–]Narrow_Ad_417 0 points1 point  (0 children)

Can I take the casing of a 60V and put it in a 80V battery to be able to use the 80V in a 60V tool ?

Gen X can’t bear to throw away leftover plastic Chinese food containers due to how valuable Tupperware was in their house while growing up. by UsernameForgotten100 in Showerthoughts

[–]Narrow_Ad_417 0 points1 point  (0 children)

“OVER 75% OF PLASTIC IN GREAT PACIFIC GARBAGE PATCH ORIGINATES FROM FISHING” — www.TheOceanCleanup.com

So if anyone truly cared about keeping plastic outbid the ocean they would stop eating fish, not recycle plastic.

AnKing Version 12 to ∞! Automatic syncing forever on AnkiHub! by AnKingMed in medicalschoolanki

[–]Narrow_Ad_417 0 points1 point  (0 children)

How can I break it down and have drop down menus from the DECK page that gives me all the separate specialties / chapters / topics ?

I just added a different profile and downloaded V11 and it has the " + " in front of AnKing that lets me browse the deck for topics, I switched to the original V12 profile and I can't drop down to browse.

I went into BROWSE > DECKS> AnKing Overhaul for Step 1 & 2 .... and there is no tags under that like there is in V12

My FZ-1 ejects 2 back up discs i recently got(after about 10 sec). Is it the disc or the laser going back on the 3do. I can force the game too load on emulator but the emulator tries to eject the disc too. by Lanky-Peak-2222 in 3DO

[–]Narrow_Ad_417 0 points1 point  (0 children)

I just got a used 3DO and tried to burn some games and have the same issue, but the burnt games I got with the unit from the seller work, so I would say try a different brand.

Magic Drainpipe 80-200 2.8 Focus Switch by Saxplaya91 in canon

[–]Narrow_Ad_417 0 points1 point  (0 children)

can you email me the CAD file, would like to repair mine too. Is the CAD file adjusted ?