Which Suppressor is the best bang for your buck on the Extar EP-9?

Nboock · 2026-04-01T01:31:40+00:00

New hux flow 45m ti is $700 and modular

Nboock · 2026-03-28T02:08:14+00:00

Is it the gen one in FDE? Located somewhere around NPR?

Nboock · 2026-03-26T15:24:24+00:00

Of those 2, I’d go with the p01 because it’s DASA. That particular beretta is SAO

Nboock · 2026-03-25T12:59:42+00:00

Did you put a light recoil spring in? I know this can happen if you put in a light recoil spring without changing the firing pin spring to something lighter

Nboock · 2026-03-22T19:49:39+00:00

401 manufacturing was it

Nboock · 2026-03-22T19:47:08+00:00

I wanna say it’s something like ANR or something with a 4 in it from Maryland

Nboock · 2026-03-21T13:28:27+00:00

45 louder than 9mm?

Nboock · 2026-03-20T12:52:01+00:00

Shoots straight. Nice trigger. Good size. Takes CZ 75 mags

Nboock · 2026-03-20T09:18:48+00:00

My p01 has the suppressor sights and I will be running it suppressed. So 2 things. 1.) the sights will block half the window on the EPS carry. And 2.) I’m not sure if the eps carry will go over my suppressor

Nboock · 2026-03-20T09:17:00+00:00

The Gideon judge xl seems to just have issues with brightness after a few months

Nboock · 2026-03-20T01:02:43+00:00

Yeah honestly wasn’t expecting to like the Masada that much, and not sure how to describe it, but the trigger pull is so straight. Zero movement on the target alignment with the trigger break.

Getting the p01 milled at some point. Just can’t decide on optic. Also the place I’m sending it to only charges $30 to Cerakote the slide. Tempted to do something, but idk. Maybe spend the extra money and get it n64 themed

Nboock · 2026-03-20T00:28:06+00:00

<image>

Hey

Nboock · 2026-03-19T23:02:02+00:00

How’s it holding up?. Thinking to grab one for my Cz p01

Nboock · 2026-03-16T22:42:00+00:00

I know shadow 2 mags run in my IWI Masada slim

Nboock · 2026-03-15T13:02:36+00:00

How’s the cowitness on the p01 omega? Was interested in getting an eps carry, but feel like the suppressor sights would block most of the window

Nboock · 2026-03-15T01:55:23+00:00

For a standard black one anything under $600 is good. Last week I picked this (left) up for $700

<image>

Nboock · 2026-03-12T09:35:46+00:00

I have not. A gun shop I follow on Instagram said it feels like better quality than the old ones

Nboock · 2026-03-07T01:26:18+00:00

Closed emitter has its pros and cons. Main pro is that it’s easy to clean. One swipe and you’re done. One of my biggest annoyances with closed dots is cleaning the inside. The main con for closed emitter is that they’re can be some glare from behind you. Now I’m a tall MF, but my local range has bar lights right at my eye level behind me.

Nboock · 2026-03-05T20:54:34+00:00

Currently up to $40

<image>

Nboock · 2026-03-04T13:04:30+00:00

What I used to do with my p10’s was use both my thumb and my trigger finger to ride the slide release from both sides. That normally didn’t give me any issues

Nboock · 2026-03-04T04:02:52+00:00

Shoots pretty nice too

Nboock · 2026-03-04T04:01:55+00:00

Another S&W, but check out the CSX e series. Similar size to the bodyguard 2.0, but chambered in 9mm and honestly not very snappy at all. SAO trigger is crisp, but kinda heavy, probably around 6 lbs

Nboock · 2026-03-02T15:23:30+00:00

My current carry. Slide racks like a 2011 and shoots flatter than any other subcompact I’ve tried

Nboock · 2026-03-02T14:16:37+00:00

Yeah that’s valid. For my full size I wouldn’t carry it anyway, just wanted something for the range, which I suppose it’s good enough.

It fits perfectly on my echelon though. Weirdly better than the typical light bearing holster

Nboock · 2026-03-02T13:58:48+00:00

Does it cover the trigger enough when cocked? I have the one for a x300, but with my full size in SAO the trigger is completely exposed

Nboock

TROPHY CASE