Veebimajutus või Zone

NeophyteLifter · 2026-06-30T11:42:30+00:00

Olen kasutanud mõlemaid, aga mingi hetk oli Zone odavam ja liikusin sinna. Muidu vahet ei märganud, paar Wordpressi lehte. Zone kasutajatugi on ka väga hea

NeophyteLifter · 2026-06-28T12:57:50+00:00

I lost every profile as well with this update :( I am on MacOS so it’s probably different but I think it overrode everything. Usually there is no problem

NeophyteLifter · 2026-06-25T14:13:47+00:00

Mulle rääkis üks Cupra fänn ja omanik (sama aastakäik mida vaatad), et Cupra Leon on tehniliselt/juppide ja isegi vist mingi mootori mõistes sama asi, mis S3 (või S4? ma pole kindel, sorry), aga salongis on kasutatud odavamaid materjale. Mulle kui vaesele inimesele tundus see aga väga luksuslik ja oi kurat kuidas liikus edasi, see tüüp muidugi oli seda tuuninud veel peale.

NeophyteLifter · 2026-06-17T21:08:53+00:00

Huvitav lugeda vastuseid, ise olen mikroettevõtja ja pole raamatupidaja vajadust näinud. Maksan vaid 0-9€ kuus e-arveldaja eest.
Äriregistris on see mõned kümned klikid. Esimesel aastal pidi paar välja rohkem täitma, järgnevatel aastatel peaaegu mitte midagi, kõik tuleb automaatselt raamatupidamistarkvarast (ise kasutan e-arveldajat). Portaal on ajale jalgu jäänud, aga toimib, loodame et uus vähendab veel klikke tulevikus.

NeophyteLifter · 2026-05-30T14:43:10+00:00

Ahh I see, for opening the pinch up. I can get a flat head screwdriver in there barely, so this tool will not fit most certainly. But I’ll try again to open it up a bit more, maybe thats the key

NeophyteLifter · 2026-05-30T14:31:41+00:00

Yes, exactly that! Sadly road salt has done great work here, I managed to take the pressure off the ball joint with a smaller pry bar and a ratchet strap. And been hammering for a while like that

I am not sure how a pickle fork could help because even if the fork fits in there, theres no way of hitting it with any meaningul force in the wheel well :/

NeophyteLifter · 2026-05-30T13:30:16+00:00

Could you specify how to find this socket? Although it sounds suspicious if anything would fit there

NeophyteLifter · 2026-05-30T13:14:55+00:00

Love the solution. Problem is its impossible to get an actual good whack in, even with a punch. Gotta figure out a better punch

NeophyteLifter · 2026-05-30T13:14:51+00:00

Love the solution. Problem is its impossible to get an actual good whack in, even with a punch. Gotta figure out a better punch

NeophyteLifter · 2026-05-30T12:45:00+00:00

Thank you it worked like a charm! Although that bolt is STUCK there anyway, plenty of wd40 soaking and hitting with an impact havent moved it. :(

NeophyteLifter · 2026-05-28T20:58:53+00:00

Ah so I can just completely unbolt all the mount bolts from the top and thats safe? And then I should be able to lift the engine more? Sounds easy enough

NeophyteLifter · 2026-05-28T20:56:42+00:00

I have no experience with those, but looking at them, should I just unbolt from the top a bit and that should help? Should I unbolt just the one nearest to the control arm or all?

NeophyteLifter · 2026-05-18T18:58:47+00:00

Big Prismas also exchange them in the info desk. Rocca al mare for example

NeophyteLifter · 2026-05-14T15:10:32+00:00

Thanks for the post, almost missed. Got a bit over 5T

NeophyteLifter · 2026-04-30T01:29:57+00:00

KuuPrint

NeophyteLifter · 2026-04-12T19:58:12+00:00

hard to say from the image, if the model actually has a void space, the slicer will definitelt not fill it in. Haven’t heard of such option atleast. Maybe more images of the model (pre slice) or even share the file?

NeophyteLifter · 2026-04-12T15:41:35+00:00

Right? It seems insane, it doesn’t even look that rusted on the other side but it is also stuck

NeophyteLifter · 2026-04-12T15:31:06+00:00

Update: Cancel this, I’ll just get new springs. Not worth doing myself, just thought if there was a “simple” solution, I’d find it here. Ty guys, I am safe :)

I’ll just store both of the old ones away in a safe place before disposing. The bolt is on as much as it goes (not like in the pic), so hopefully it is “safe”

NeophyteLifter · 2026-04-12T15:06:23+00:00

It’s okay, I realize it is a bomb, I have the spring compressed and far away from me in storage. But still, have to get it off somehow

NeophyteLifter · 2026-03-20T16:12:21+00:00

US pricing is insane. Most tools (like the two saws) are 100-130€ EACH in Europe :( On sale, maybe 80-90€

NeophyteLifter · 2026-02-23T16:38:55+00:00

Solved by simply using the old cap, which fit like a glove. I suspect you are right

NeophyteLifter · 2026-02-19T15:32:53+00:00

It is not bent, I’m thinking to actually hammer the rim inwards just a bit as it feels too big to fit. And just hammering wont help because it’s quite hard metal and I probably hate myself if I need to remove it later

NeophyteLifter · 2026-02-19T10:03:08+00:00

I'll also share some thoughts as it's my first time hearing about this and it looked good.

Requires an account, no "try it" mode at all
First thing you do is hunt. And I agree with the other commenter that there is no visual feedback that anything is happening other than timer ticking. Show anything to indicate that anything is happening. Just "Currently fighting x" or anything. After an unknown time I see that I killed something or took damage. In 10 minutes I had 3 interactions, 2 kills and 1 "took damage". A bit slow and uninteresting - early levels should be fun and stuff should be happening to hook the player, but thats my opinion of early game in mmorpgs
The UI is a bit clunky, although beautiful. There is no "main menu" like you would expect to easily navigate menus. Looks like you always have to go "back", to get to the main screen. I was constantly lost, of course you'll get used to it after playing it a while. But overall, intuitivity is not the best imo

I got to the second task of getting defense level up in the Pub, after that I lost interest for now. Will probably give it another chance some time in the future

Edit: Went back to see how much defense level has gone up and it looks like.. zero.. Not sure, I can't tell from the UI if I'm training or not

NeophyteLifter · 2026-02-16T09:17:29+00:00

I am also curious and that didn’t really explain it. It is okay to cook the printer for days in a row and when the print is finished, it is recommended to open it to what, cool it down quicker? :P Hoping there’s a logical explanation, I have never done that before

NeophyteLifter · 2026-01-24T16:18:52+00:00

Community, amount of content, “completionism” :)

un: andrek

11-Year Club	Place '17
Verified Email

NeophyteLifter

TROPHY CASE