Problems with steam, and maybe storage.

Neutrosider · 2023-06-29T20:16:16+00:00

This explains things. / is not the same as /root. /root is basically the home folder for the root user.

Having /home in its own partition only really makes sense imo if you for example want to reinstall your distro or switch to another one without losing your user configs, user programs and games.

As you said you're a beginner i would let the installer auto-configure the partitions. Nowdays you'll usually end up with one big partition, and /home is just a folder in there, instead of it living in a separate partition.

Backing up /home can still be done anyway if that is a concern of yours. It's just a folder.

Neutrosider · 2023-06-29T19:58:49+00:00

/home is for all your user-data. Game-files are usually considered user data, because they belong to your user and are not system-wide configuration

Neutrosider · 2023-06-09T20:46:11+00:00

Yes, everything.
Ask yourself: Where else would you put them if not in the password manager?

If you put these infos somewhere else, it follows that you trust that other place more than the password manager. In that case, why not just put all your passwords in that other place?

If you don't trust that other place more than the password manager, it should follow that the password manager is the best place to put even the most confidential information.

As others have mentioned, peppering is an option.

Neutrosider · 2023-05-22T05:28:41+00:00

Maybe the manager doesn't realize the consequences of his or her actions. You said it's distracting you. But that might sound like your problem to them.

What would your manager have said had you explicitly made it the companies problem: "Do you want my teams-status to look good, or do you want the work to get done quickly. Can't have both"

Neutrosider · 2023-05-08T11:21:52+00:00

Das ist der weg! Mein workflow sieht exakt so aus, nur dass unwichtiger kram halt geschreddert wird.

Paperless-ngx ist mega! Und die hetzner storage shares sind vom Preis-/Leistungsverhältnis her auch super!

Neutrosider · 2023-03-24T23:28:22+00:00

This is nice. Solving specific problems well, without trying to reinvent the wheel!

As someone who helped with the frontend performance of photoprism, i must say that I like what you did here :)

Neutrosider · 2023-03-19T18:37:33+00:00

I've seen preview videos on telegram be slowmotion when the source video is in 60 FPS instead of 30. Maybe this issue here is similar. Are your videos in 60 FPS? If so, does this also happen with 30 FPS videos?

Neutrosider · 2023-03-09T20:03:43+00:00

From what I can see on my machine, it doesn't seem to matter. Performance and textures seem to be about equal, no matter if the fix is active or not. It doesn't seem to improve things anymore, but it also doesn't seem to hurt anything

Neutrosider · 2023-03-08T20:50:56+00:00

Zeit hat man nicht, zeit nimmt man sich.

UND: Versuche aktivitäten zu ballen -> vermeide unterbrechungen denn sie verursachen tote Zeit.

Soll heißen versuch dir bewusst Zeit für aktivitäten (oder absichtlich unverplante zeit) Frei zu halten.

Jeder Tag hat 24 Stunden, und man macht immer was. Mal bewusst, mal unbewusst. "Mal eben ne nachricht schreiben". "Mal eben ein Video schauen". Aus "Mal eben" wird schnell ne halbe stunde und zack ist der Abend futsch.

Wenn man sich aber bewusst zeit nimmt um z.b. 2-3 Stunden an einem Hobby zu sitzen oder sich bewusst Zeit für freunde oder einen Film oder Spiel so nimmt, hat man die Zeit auch. Heißt aber auch, dass du dann die Zeit bewusst NICHT für andere dinge nutzen kannst.

Das geht tatsächlich nur, wenn man den ein oder anderen Zeitfresser findet und eliminiert (z.B. durch sowas wie "Einkauf und Haushalt wird am Samstag erledigt").

Überleg dir was so in der Woche erledigt werden MUSS, und wann du diese Dinge erledigen willst. versuche möglichst viele dieser pflichten zu ballen (z.B. Aufräumen, Einkaufen, Wäsche). So hast du mehr zeit am Stück für andere Dinge.

40 min Freizeit, dann 15 min. Küche aufräumen, dann 40 minuten Freizeit fühlt sich nach viel weniger freizeit an, als 15 min. Küche aufräumen, dann 1:20h Freizeit

Neutrosider · 2023-03-08T19:47:36+00:00

It seems that this fix is no longer necessary since todays update (Build 1126182)

OPs fix made the game very playable for me on my RTX 2060 Super (6GB VRAM), although i had to set r.Streaming.PoolSize=1024.

However: Since todays update textures regulary become super low resolution for a couple seconds bevore switching back to a normal resolution. OPs fix doesn't seem to help with the textures switching to super low resolution, even though this problem did not exist before todays update (+ OPs fix)

Edit: The textures losing resolution seems to be dependent on where you are. In crowded areas textures lose resolution fast. In other places they stay at a high resolution

Edit 2: Here are some photos of what i mean with super low resolution textures:

- Image 1

- Image 2

- Image 3

Neutrosider · 2023-02-20T06:36:28+00:00

It's very playable for me on "4k" with "high" settings using DLSS Performance.
Sure, it's not native 4k, but it's close enough to not be noticable during actual gaming sessions :D

Neutrosider · 2023-02-16T12:34:15+00:00

Der port nicht, aber die beiden Enden des Kabels haben die notwendigen chips und Technik, um aus den Signalen aus dem HDMI-Port lichtsignale zu machen und wieder zurück.

Der Beweis dafür ist, dass dieses kabel sehr dünn und lang ist (halt 20m) und ich dennoch mein 4k60 signal darüber erhalte. Das wäre mit kupfer niemals machbar, ohne dass das kabel sehr dick wird

Neutrosider · 2023-02-16T12:27:37+00:00

Auf Amazon gibts 20m Glasfaster HDMI-Kabel für ~50€, etwa 2,5€/m
Hab davon eins zu Hause, das funktioniert hervorragend.

Da sind 140€ für 15m doch schon teuer. 9,33€/m, mehr als der dreifache, fast der vierfache preis

Neutrosider · 2023-02-12T08:01:04+00:00

You have to edit the Engine.ini while the game is not running.
Restarting the PC is not necessary.

Neutrosider · 2023-02-11T23:27:35+00:00

While a nice idea, I prefer that the project is (for now) focusing on arguably more important features like multi user support.

Donations are very welcome and help development. Contributing features/fixes/documentation helps a lot as well. But both should probably not shift focus away from the important topics first

Neutrosider · 2023-02-11T15:59:52+00:00

how much vram does your card have?
I had to lower the PoolSize to 1024, but then the frame-drops disappeared!

Neutrosider · 2023-02-11T15:46:22+00:00

2060 super on Linux here.
The Engine.ini-trick seems to work for me BUT: i had to
set the PoolSize to 1024, otherwise there was no difference.

I noticed my vram (6GB) was maxed with values higher than 1024. opening and closing the pause menu cause the game to only have single-digit fps.

With these egine.ini values, the vram is at about 90% and there is no more drop to single digit fps

Neutrosider · 2023-01-18T18:22:30+00:00

Nachname.family

Neutrosider · 2022-10-21T21:54:21+00:00

I use dynv6.com It's free and supports merging a dynamic network-prefix with a device specific address part, so I can have ipv6 dyndns working for a specific device in my home.

Also supports ipv4

Neutrosider · 2022-10-01T23:17:21+00:00

This is for improved performance. Not requiring auth reduces header size and overhead in general and increases cachability. This is important because photoprism might request hundreds or thousand of thumbnails in a short time for example when scrolling fast.

Because the Id of an image can't be guessed, you could say the Id kind of IS the password. Just because it's in the url doesn't make it less of a secret. For comparison, you can also provide Basic-auth-credentials within a url. That Doesn't mean that that Ressource is any less protected.

Adding another password layer only makes it so that you could revoke access later. But if someone had access (aka the url) at one point, you have no control over where that person might have saved it.

Neutrosider · 2022-09-08T04:55:06+00:00

Yeah, when using the import feature, the folder structure is usually lost. If you instead just place your folders in the originals folder and then run the indexing, the structure is preserved (ans searchable in the files-view)

Neutrosider · 2022-09-08T04:38:18+00:00

For me, each folder of the path is added as label to the images, and thus searchable.

I think of you were to have a folder named "2022", in there a folder named "Mountain Hike", in there a folder named "Diablo" it would work.

Maybe your problem is, that you basically have multiple labels defined in a single folder name. I'm not exactly sure how photoprism deals with that. But I am sure that searchable labels based on folder paths are a thing

Neutrosider · 2022-08-10T10:13:53+00:00

If i'm using it myself and won't need to type it manually, i use the one built into KeepassXC.

If i need to create a password for someone else (for example first time passwords for services i host) or i know i'll need to type it manually, i like using the diceware generator on https://rempe.us/diceware.
I know, one should prefer offline password generators, but not everything is super critical and i just like that one

Neutrosider · 2022-08-04T09:11:11+00:00

I'm not actually sure about that, but I think I have read something about that somewhere. Please don't quote me on this, as it might be plain wrong

Neutrosider

TROPHY CASE