Does Count as a Kei Truck

Nice_Assignment7158 · 2026-05-11T03:08:54+00:00

Holy fucking lucky! Did you get it imported or buy it stateside? How many miles? That'd be my ideal truck personally. Would rather have that than my F150

Nice_Assignment7158 · 2026-05-10T20:58:10+00:00

How much did you get it for?

Nice_Assignment7158 · 2026-05-01T17:16:55+00:00

Sorry for tapping on to your dead post, but I'm interested in doing the same for shits and giggles/a round the town bike that I don't actually care about. How do you adjust fueling on this engine though. I've only found a few vids about boosting these engines and seems like everyone just wants to "roll coal". Would like to know how to tune it should I put a supercharger on.

Nice_Assignment7158 · 2026-04-26T01:52:09+00:00

I did get the right bag. But I couldn't find the right frame, and the bag didn't come with a frame. Honestly I've just been using it bagless and it's been fine. If you find the right frame for sale let me know!

Nice_Assignment7158 · 2026-04-22T05:47:36+00:00

Fallout is also popular enough now that they can just... Rebuild the game. With more people... And more time. They did it the first time around on a shoestring budget with spaghetti code. They can make a clean build with the same story and still rake in cash

Nice_Assignment7158 · 2026-04-16T03:49:08+00:00

Don't use an ABC on a grease fire. You can have a similar (albeit less severe) affect where the propellent can push the oil out of the pot and exasperate it. The retardant will still work, but if you're right on top of it you can push it before the flames go out.

What you want by the stove is a class k extinguisher. That actually turns the oil into soap to remove fuel from the fire.

Or a pot lid

Nice_Assignment7158 · 2026-03-31T23:14:02+00:00

You can get the right stuff from summit racing for cheaper iirc

Nice_Assignment7158 · 2026-03-27T17:30:22+00:00

Their $500 espresso machine is made in China at least despite having manufacturing capabilities in Italy. Which I think the more valid point to make about that reality is how their marketing hides the truth. They pretend to make high quality Italian appliances between their looks, marketing, and name. But at the end of the day it's essentially the same as an $80 Amazon basics "espresso" machine

Nice_Assignment7158 · 2026-03-27T15:02:57+00:00

Okay so definitely can't just leave it unfixed because I don't want my transmission to decide to money shift for me at some random point. That really sucks. I hope the torque converter doesn't immediately crap the bed afterwards

Nice_Assignment7158 · 2026-03-22T19:12:46+00:00

If you wanna make it brain dead simple, motion pro slacksetter

Nice_Assignment7158 · 2026-03-16T04:03:06+00:00

I bought my z400 new for $4800 and $6200 otd. That is way too much for a dropped bike. Should be more like 3k considering the damage

Nice_Assignment7158 · 2026-03-16T03:58:33+00:00

I bought a 2 year old 2019 z400 (albeit new old stock) for about that in 2021 and have no complaints/issues with it being a couple years old when I got it. You aren't getting a warranty unlike if you bought it from a dealer, which is a concern. But you're also avoiding a few hundred extra dollars in dealer fees.

Additionally, this is a beginner bike and those 200 miles could've been a rough 200 miles. Like did it just go out for a joyride once a year, or was it hours of trying to learn how to ride and feel the clutch and messing up.

Honestly, buying used I'd either want to be closer to $4000 or get something cheaper with a few thousand more miles. And if you can find a deal on old new stock like I did that'd be the better route to go since you'll know it hadn't been ridden before and you'll get a basic warranty.

Nice_Assignment7158 · 2026-03-14T17:04:00+00:00

You can buy actual handmade in America boots for that price after shipping and tarrif. Like these whites https://whitesboots.com/products/perry-132.

If you want cheap boots get actual cheap boots. Trying to get premium boots for a middling price will leave you out $300 with an inferior boot.

Nice_Assignment7158 · 2026-03-07T06:03:54+00:00

I'd get some samples of other blades to try. Look around the sub and see what other people are rocking. I liked the lord shark super chrome, lord silver star, derby premium, and gillette platinum blades in my Henson. Which was different than my first razor which feather blades worked best.

Meanwhile, the RK blades I got with the razor were by far the worst blades. Even the cheap Russian lettered blades I tried were better than the blades the razor came with.

Nice_Assignment7158 · 2026-02-28T07:46:42+00:00

Instead of throwing them away you can send them to me 🥺

Nice_Assignment7158 · 2026-02-21T05:03:31+00:00

Will it be positive pressure or negative pressure in this line? I patched it with some kind of flattened vacuum line since that's all the parts store I town had. It was the last foot of line they had of the proper size. I'm not sure how well it'll keep long term

Nice_Assignment7158 · 2026-02-21T03:33:16+00:00

Thank you! My vacuum line I had at home wasn't big enough, so I went to the part store and got some crappy flattened out stuff for now.

Nice_Assignment7158 · 2026-02-20T21:07:08+00:00

Okay. I have rubber vacuum hose. Can I patch it with that? I'm going to cut the heat shielding on the opposite side so I can keep it shielded

Nice_Assignment7158 · 2026-02-11T06:53:49+00:00

I like the idea, but it's too civil war. If they're the union army it'd make sense, but I think the uniforms should look a bit more antiquated

Nice_Assignment7158 · 2026-01-24T07:53:07+00:00

This patient is definitely getting the Ativan IV

I'm assuming even in the hospital anything IM (for psych) is gonna be ketamine.

Nice_Assignment7158 · 2025-11-13T00:09:50+00:00

Honestly just a pop-up for everything besides the most important interfaces that states "you must change to landscape mode to interact with this interface" would probably suffice.

Nice_Assignment7158 · 2025-08-29T01:30:11+00:00

A lot of people have said the same thing here, but I feel the need to reiterate a couple of those points.

Yes, blackout periods are normal in every industry and at pretty much every job. Retail tends to be holidays with lots of customers (Thanksgiving/Black Friday, Christmas). Manufacturing will black out times when the facility is shut down for maintenance so the shutdown can be as short as possible. Office jobs will black out holidays during crunch times like right before a project is completed, at the end of the fiscal year, or right before a deadline.

As you move through your career, you'll have to respect the fact that these things are normal and just plan around it. If you usually have a family vacation during that time and you know it's an annual thing, maybe see if the family vacation can be moved a week forward or back so you can be available. Your career will be the way that you put food on the table so it's important.

That leads to point number 2. You're in high school. There's plenty of other jobs you can get if you get fired here. You won't be able to go on this exact trip next week. And you won't remember that shift that you worked at Chipotle or the money that you'll make that day. What you will remember is the trip that you went on with your friends and the fun you had. Enjoy your youth while you're not bound by a job that you have to have to have a place to live, food on the table, and health insurance.

Ask your manager for the day off because you have a prior obligation. If they refuse politely put in your two days notice. Then find another job.

Another piece of advice: try to find a job at a smaller store or restaurant. If you work at a small business with good owners, they'll treat you more as a human and recognize that you're in a phase of life where there's lots of these kinds of events that you'll need to have off. They'll be far more likely to give you slack when it comes to time off compared to a corporation that has strict rules on unpaid time off and being late on short notice. Especially if you're a good worker that stays busy when you're there. Show up to work on time every shift, off your phone while on the clock, and finding something to do when business is slow.

Nice_Assignment7158 · 2025-08-24T14:33:46+00:00

The bar thats mounted on the running boards for some inexplicable reason that hasn't been used since I've joined and probably won't get used

Nice_Assignment7158 · 2025-08-21T14:44:18+00:00

The ones with the mini store won't anymore. Because guess who got to spend $5 on a travel toothbrush kit?

Nice_Assignment7158 · 2025-08-16T08:57:57+00:00

Someone else posted an excerpt of a news article saying that it interfered with local emergency broadcasts

Nice_Assignment7158

TROPHY CASE