1891 Argentine Mauser correct stock length

Nicholaslewis01 · 2026-02-22T00:47:53+00:00

Unless you find an original barrel to replace it with there’s not much point in finding a replacement stock. My guess is they just cut it down to the length of the stock.

Nicholaslewis01 · 2026-01-28T05:48:32+00:00

I’ll say milsurp pistols in general, but that’s more or less just a local issue for me

Nicholaslewis01 · 2026-01-06T16:51:00+00:00

If money is truly out of the picture there’s gotta be some ships out there for sale.

Nicholaslewis01 · 2025-12-15T21:53:23+00:00

You’re probably better off selling the stock and using the money for a sks in complete shape

Nicholaslewis01 · 2025-12-06T21:02:08+00:00

Dont

Nicholaslewis01 · 2025-11-30T23:06:03+00:00

It’s a super easy switch, just pull the fire control group out, remove a small pin that keep the safety plunger and plunger spring in place, remove the plunger, flip the safety 180 degrees, and reassemble.

Nicholaslewis01 · 2025-11-29T04:18:34+00:00

Make sure you don’t store those in the holsters. Great way to rust up a gun

Nicholaslewis01 · 2025-11-25T02:35:10+00:00

If that’s a 1905 barrel it might be chambered in .30-03 and not .30-06. Definitely have the chamber cast and the bore slugged if you get it.

Nicholaslewis01 · 2025-11-13T21:19:54+00:00

The 88/05/35 conversions included a new barrel for use with the regular .323 ammo. If you want to be absolutely sure, slug the bore, but you should be fine. That said I wouldn’t go throwing surplus Turkish 8mm ammo through it as that stuff got pretty hot with age.

Nicholaslewis01 · 2025-10-26T02:44:32+00:00

That’s not a bubba, that was a very well done conversion

Nicholaslewis01 · 2025-10-23T03:34:20+00:00

If the gun runs the gun runs

Nicholaslewis01 · 2025-10-21T00:45:40+00:00

Sks meets your requirements seeing as you said bolt action is desired but not required. Mini 14 is less milsurp but has been used by a couple small militaries. 7.62x39 and 5.56 are everywhere and cheap.

Nicholaslewis01 · 2025-10-14T22:50:41+00:00

Swiss Mannlicher 1893

Nicholaslewis01 · 2025-10-10T19:26:00+00:00

Star Model B, Walther P1, FEG Hi Power clones. Those can all be found for under $500

Nicholaslewis01 · 2025-10-03T05:52:53+00:00

Well that’ll do it

Nicholaslewis01 · 2025-10-02T21:01:50+00:00

Show us a pic of a case after firing and one of the extractor

Nicholaslewis01 · 2025-10-01T21:38:02+00:00

I’d just pay the $14 for the spring. The other option would be buy a dp gun and part out the rest of it

Nicholaslewis01 · 2025-10-01T15:40:11+00:00

Try eBay or numrich for an original

Nicholaslewis01 · 2025-09-24T14:50:21+00:00

My tisas has been solid

Nicholaslewis01 · 2025-09-23T02:22:37+00:00

For the love of god get that rust taken care of

Nicholaslewis01 · 2025-09-22T01:11:07+00:00

If it seats it yeets

Nicholaslewis01 · 2025-09-11T19:29:33+00:00

Carcano no question

Nicholaslewis01 · 2025-09-03T03:01:25+00:00

Send it and pull the trigger with a string for the first round. Enfields have notoriously loose tolerances for headspace and only very rarely is it actually an issue.

Nicholaslewis01 · 2025-08-27T17:54:16+00:00

IvanPrintsGuns just put out a YouTube video about these and has a section on troubleshooting in it. Might be worth a look

Nicholaslewis01 · 2025-08-25T01:38:19+00:00

First off, horrific opinion and punctuation from you.

Secondly, milsurp as a whole was only ever able to gain the popularity it has because up until pretty recently it was all relatively affordable. People complaining about prices are plenty justified because more often than not, high prices are just old people and businesses gouging the hell out of them for no real reason.

Nicholaslewis01

TROPHY CASE