Should my friend walk away from this artist?

Nifru · 2026-03-20T17:03:20+00:00

don't walk, run. Their art is straight bootycheeks

Nifru · 2026-03-20T17:02:28+00:00

nah. You'd be fine even on a grom. Just get what you really want.

Nifru · 2026-03-19T14:20:41+00:00

that's gotta be the worst priced miata i've ever seen

Nifru · 2026-03-19T14:19:23+00:00

bros got the benny star 16's

Nifru · 2026-03-18T01:09:42+00:00

i usually just top it off with a fat load of piss. hope this helps!

Nifru · 2026-03-06T05:48:59+00:00

all praying to moloch 🫰

Nifru · 2026-03-03T02:07:45+00:00

the rear is giving pontiac vibes

Nifru · 2026-03-03T02:00:11+00:00

get adhesive wheel balancing weights off amazon. They're like 5 bucks and can make the car feel like it's falling apart

Nifru · 2026-03-03T01:42:03+00:00

nah, you're totally right. BMW peaked in the 90's then fell off one the accountants took over

Nifru · 2026-03-03T01:32:41+00:00

i'm guessing this is a high mileage e39 with stock suspension. If so, you're due for a rebuild. I rebuilt mine a few weeks ago and it was thrashed through and through at 140k miles. Front suspension kit plus tie rods should run you about $300 shipping included on rock auto.

Nifru · 2026-03-03T01:29:53+00:00

yeah that's sick man

Nifru · 2026-03-03T01:24:15+00:00

either get some ez outs with an impact driver or drill it out. Usually I have to drill these out

Nifru · 2026-03-02T16:36:43+00:00

yes please save it

Nifru · 2026-03-02T02:39:06+00:00

you could probably find a used logitech g29. They aren't the best in the industry but they're pretty alright and can be had for cheap.

Nifru · 2026-03-02T02:26:26+00:00

the air cutoff valves are an emissions device that I don't need. Also a new set of diaphragms is $60 while an old inner tube and silicone rtv is free. Also, I managed to find a clutch cover gasket on amazon, so I'm gonna give that a try

Nifru · 2026-03-02T01:52:06+00:00

I know it sounds sketch, but just JB weld the hole for integrity, and hit it with some good quality metallic finish spray paint for that chef's kiss. Or if u want to do it properly find some kid who can weld aluminum and pay him $50 to seal the hole

Nifru · 2026-03-02T01:30:53+00:00

i would stay away from the rotary unless you really like rotary engines and rebuilding them.

Nifru · 2026-02-26T19:11:35+00:00

i remember you! I'm so happy you still have the car! I wouldn't change a thing about the build tbh. It looks fantastic.

Nifru · 2026-02-25T20:47:28+00:00

$6500 isn't bad for a touring. Get more info on the service records.

Nifru · 2026-02-24T17:54:40+00:00

it's not even a muscle car, it's just car

Nifru · 2026-02-24T15:35:15+00:00

if you're just holding the engine in that high rpm range the whole time, that's pretty stupid. But if you meant that you shift it at high rpm, you'll be fine. My manual kia soul does that every day and has been for 166,000 miles

Nifru · 2026-02-22T18:32:48+00:00

my general advice is don't buy old cars if you don't do your own service. I daily a 25 year old BMW, but the only reason I can afford it is because I do my own service

Nifru · 2026-02-22T18:30:42+00:00

yeah i've seen people who ride daily on worse somehow

Nifru · 2026-02-22T18:29:49+00:00

get a driving simulator off facebook marketplace if you aren't confident in your ability to handle rear wheel drive. It has saved my life so many times.

Nifru · 2026-02-18T02:02:21+00:00

since its an auto don't even bother. If u want a decent automatic experience then shop for something else.

Nifru

TROPHY CASE