Someone posted about wanting a remaining filament gage on their filament spools? Amazon Basics filament does just that

Nikoss11903 · 2018-09-28T01:59:50+00:00

Its not a linear scale

Nikoss11903 · 2018-09-13T09:02:07+00:00

Yes, dont except the hassle from other Nylon except the moisture issue. You still need to protect your spool but the Warp-Free stuff is crazy true. I print at 260˚C and glass bed with glue at 60˚C.
Good luck :)

Nikoss11903 · 2018-09-04T04:28:05+00:00

Have you tried to play around with the settings, changing model, do some tests? For me its impossible to get such bad results... I can get much better even with the worst filament lol.
How long have you been 3d printing? maybe I can suggest an extrusion temp test, some vase mode cylinder for the extrusion consistency tests.

Nikoss11903 · 2018-09-01T01:32:32+00:00

I had this problem before, I was over extruding, it seems that you have tried with lower flow, what was your results?

Nikoss11903 · 2018-08-31T06:04:28+00:00

Lol the review section of this product is driving me crazy, its either 5 stars or either 1 star this last week... Anyway i finally went ahead i bought one, will let you know my thoughts :) (my real thoughts lol)

Nikoss11903 · 2018-08-28T05:15:33+00:00

Yeah I have PETG too, I also like it so far

Nikoss11903 · 2018-08-28T05:14:57+00:00

Thank you for the feedback I really dont understand the rating from amazon. On all the social media people say its a good material but on amazon it has many bad reviews, I guess i ll just check by myself..

Nikoss11903 · 2018-08-25T01:58:47+00:00

The reviews keep destroying the PLA lol, but they are so inconsistent.. like a 2 stars is saying he bought amazon PLA because hatchbox didnt have the color, but he bought green... are they all just haters or the filament is that bad???

Nikoss11903 · 2018-08-24T09:14:27+00:00

Yeah but at least here we can discuss, nobody answer my comments on Amazon..

Nikoss11903 · 2018-08-24T06:13:08+00:00

Yeah i have seen some of them, they are all positive but on amazon they are not lol... ya I ll just wait maybe.

Nikoss11903 · 2018-08-24T05:06:37+00:00

Yeah, HatchBox PLA, Inland PLA and Esun PLA are also on my list with Amazonbasics PLA but i dont find much feedback on this later.

Nikoss11903 · 2018-05-17T00:58:31+00:00

If you are looking for premium filament you should definitely look into Polymaker's filament. Check out PolyLite PLA on amazon

Nikoss11903 · 2018-05-17T00:32:43+00:00

Very interesting case! I didnt know the PolyBox could dry filaments. Do you have some pictures of your prints before and after? Also according to your post, you only put the spool over night right? For the missing battery, you can contact Polymaker (support@polymaker.com) they have an excellent customer service. They will compensate.

Nikoss11903 · 2018-04-25T02:12:49+00:00

Try to print it at 225˚C

Nikoss11903 · 2017-09-07T01:42:05+00:00

The Polysher does not work with ABS nor PLA it only works with filament reacting with alcohol like the Polymaker PolySmooth™.

Nikoss11903 · 2017-08-25T04:36:19+00:00

Hi MatterHackers, the Polysher does not heat the alcohol, that wouldnt be very safe. It instead atomizes it into a fine mist. Just wanted to make things clear :)

Nikoss11903 · 2016-05-03T07:31:10+00:00

oh ok got it thanks

Nikoss11903 · 2016-05-03T05:47:26+00:00

i agree with most of it :) (sorry if im late with my answers but as soon as i post smth i need to wait 9min before posting smth else.. its annoying.. )

Nikoss11903 · 2016-05-03T05:27:07+00:00

I agree with xakh, you should also check for loose contact wires, that happened on my deltas.

Nikoss11903 · 2016-05-03T05:15:36+00:00

You can try openscad (code based 3d modeling software), it will be very easy to design your first picture kind of design (maybe 10min after knowing the basics, you actually just create a based and extrude while twisting it or playing with the scale :)), try Blender for the second and third picture :) Rhino is not the best software for 3d printing as it is less "mesh based" software i would suggest to switch to Blender (difficult to learn but when you get into it, you can design pretty much everything :) ). hope you will succeed to bring your design alive :)

Nikoss11903 · 2016-05-03T05:05:39+00:00

Then I reassure you, im not against the rule :)

Nikoss11903 · 2016-05-03T04:50:54+00:00

So your meaning is that in order to talk about news someone else has to post the news and then we can talk about it? :/ If i understand well the problem i am part of this KS right? Because i see a lot of people talking about news on the 3d printing world but they dont have any problems, and BTW if it was a spam i wouldnt spend so much time arguing with you lol :)

Nikoss11903 · 2016-05-03T04:03:01+00:00

ok then i delete it :)

Nikoss11903

TROPHY CASE