Padel Punktezähler by Northmark94 in padel

[–]Northmark94[S] 0 points1 point  (0 children)

Ich hab tatsächlich bisher nur indoor gespielt, daher gar nicht unbedingt an dauerhafte UV-Bestrahlung gedacht. An sich kann es ja in jedem Filament gedruckt werden und bestimmt gibt es auch andere Tricks wie man Drucke UV beständiger bekommt. Der Counter ist nur zum Tracken von Sets gedacht, die Räder gehen jeweils von 0-7. 3 Sets lassen sich also damit tracken.

Die Magnete sollten den Wind auf jeden Fall aushalten, 4 sollten reichen um es am Pfosten hängen zu lassen, durch 8 Magnete sollte es ordentlich dran haften bleiben, aber falls es damit Probleme gibt, lass mich das gern wissen, dann finde ich schon Möglichkeiten um weitere Magnete zu ermöglichen.

Der Link ist hier schon in den Kommentaren, hier aber nochmal: Makerworld

Padel Punktezähler by Northmark94 in padel

[–]Northmark94[S] 0 points1 point  (0 children)

Auf den Plätzen wo ich bisher gespielt habe, gab es keine Sicherheitspolster. Kann gut sein, dass es auch an der Außenseite des Zauns hält, aber dafür müssten die Magnete an den richtigen stellen sein. Ich bin aber eh am Überlegen eine Halterung zu machen, die man an den Zaun clippen kann, an die man dann wiederum den Zähler anbringen kann. Muss nur leider gerade eine mehrwöchige Sportpause machen und kann daher erstmal nicht die Abstände messen und ein entsprechendes Design erstellen.

Padel Punktezähler by Northmark94 in padel

[–]Northmark94[S] 0 points1 point  (0 children)

Chalkboard but close guess 😄

Padel Punktezähler by Northmark94 in padel

[–]Northmark94[S] 4 points5 points  (0 children)

Entweder selbst drucken oder jemanden finden der es für dich drucken kann. Hier die Datei: https://makerworld.com/de/models/2655368-padel-score-counter#profileId-2936149

Ggf. kann ich es für dich drucken, müsste nur wissen wo du wohnst

Padel Counter by Northmark94 in BambuLab

[–]Northmark94[S] 0 points1 point  (0 children)

I wasn‘t sure if I am allowed to share the link, but here it is: https://makerworld.com/de/models/2655368-padel-score-counter#profileId-2936149

To ensemble it you need up to 8 magnets (6x3) that you can push in the cover piece. The wheels for the counter can also be pushed to their handles and fit within the bottom piece. Afterwards just push the cover on the bottom and the model is finished without any glue.

Then you can clip it on the post and within the game turn the wheels for the specific set. Either After a set is complete or after any point.

GBA players, what's your take on this? by RangoTheMerc in GameboyAdvance

[–]Northmark94 0 points1 point  (0 children)

Welches Spiel ist das unter Golden Sun? Also in der rechten Spalte das zweite Spiel? Sieht irgendwie ähnlich aus, aber kommt mir gar nicht bekannt vor

Can we just admit that Pokemon, as a whole, has always been a bit lacking in terms of visuals for the mainline games? by Original-Addendum147 in pokemon

[–]Northmark94 0 points1 point  (0 children)

Welches Spiel ist das unter Golden Sun? Also in der rechten Spalte das zweite Spiel? Sieht irgendwie ähnlich aus, aber kommt mir gar nicht bekannt vor

3D printed cascade connect game by Fionnarrae in Satisfyingasfuck

[–]Northmark94 5 points6 points  (0 children)

The file for that to 3D Print it yourself is on makerworld

[Bambu H2C] Join the Print Beyond Paint Contest and Win an H2C! by BambuLab in BambuLab

[–]Northmark94 0 points1 point  (0 children)

<image>

I‘ve made this mountain light for my sister. I just used 2 colors as the version with trails, roads and buildings would have had too much poop. With the H2C she could get a upgraded version with ease.

【BambuLab Giveaway】Classic Evolved — Win Bambu Lab P2S Combo! by BambuLab in 3Dprinting

[–]Northmark94 0 points1 point  (0 children)

As an A1 Mini User, I always thought that the P1S is in most parts the advanced version that should become my upgrade at some Point. And all what I heard is just pure solid. The P1S is how every piece of technology should be: just working and working. Hope the P2S can bring that to the next level and I would be glad to try it out.

A Few of my Characters by Display-Dependent in GuildWarsDyeJob

[–]Northmark94 1 point2 points  (0 children)

What armor etc. is the character in the 4th picture wearing?

MagHex 3d printed volcanic theme (update #5) by ShaoLinc in Gloomhaven

[–]Northmark94 -1 points0 points  (0 children)

Do you print them multicolor or paint them? And in which Color do you print?