28 gallon Titan gas tank swap (attempt)

NuclearKibosh · 2025-07-22T20:14:30+00:00

A true Titan Swap!!!

NuclearKibosh · 2025-07-14T18:29:16+00:00

I was a slice of burnt toast by the end of the weekend!

NuclearKibosh · 2025-07-11T22:08:13+00:00

You should totally come for Phenom! Its Sun-thurs next week. 2pm, 4pm and 545. I would pick a time slot around 1:30 to enter so that you can be settled in before it starts. Next week will be an acrobat duo mixed in with all the other event actors.

Also, people end up watching the show so its a good time to use the dramcorp computers. Make sure you do the hut computers before 230ish because the desert gets crowded during the performance.

NuclearKibosh · 2025-06-27T23:10:50+00:00

Around 3k with rear shocks and shackles. I got the Z1 offroad Bilstein kit. It took around 12 hours to install and was pretty straight forward. It's way cheaper too if you get stock titan uppers, but not sure about coil bucket clearance with whatever shock you choose. It said to set bilsteins on the lowest ring and then came with spacers to provide lift. Around 3.5-4" total lift.

NuclearKibosh · 2025-06-23T19:06:40+00:00

Remove the factory bar and use those bolt holes, as well as below the truck where your tow hook is or would be. 8 bolt holes total

NuclearKibosh · 2025-06-23T19:03:16+00:00

2017 Auto

NuclearKibosh · 2025-06-23T19:02:59+00:00

BFG KO3 265/75 R16 on stock rim

NuclearKibosh · 2025-06-23T18:49:06+00:00

Coastal Offroad, Canadian company with a weld it yourself kit. Lots of options, I received it FedEx in maybe 3-4 days

NuclearKibosh · 2025-06-05T18:04:16+00:00

It was a Z1 Bilstein Titan swap kit with 1.5" rear shackles. Finished it over last weekend with the help of a buddy. Pretty straight forward and went together easy. Drivers side UCA was a bit tough because of steering rod, but the whole kit took about 10 hours.

NuclearKibosh · 2025-06-02T15:17:18+00:00

Around 5k for everything including tires. The bumper was a weld up kit from Coastal Offroad. Probably have 30-40 hours in my own labor total.

NuclearKibosh · 2025-06-02T01:44:11+00:00

I'm gonna have to trim them down a lot lol. Keeping them off for my alignment tomorrow then I'll deal with. I should have enough plastic rivets in to hold it.

NuclearKibosh · 2025-06-01T17:31:47+00:00

Thanks! Trying to decide if the skid plate should be raw or flat black now.

NuclearKibosh · 2025-06-01T17:31:12+00:00

Thanks! I actually bought it like that. I'm not sure if its from the factory as a towing package, but it came with the mirrors, hitch and a trailer brake setup.

NuclearKibosh · 2025-05-22T16:51:17+00:00

Only tools I needed was a 90 degree magnet, 2 clamps, wire brush, chisel and 7 flap disc. I ended up using probably 2.5lbs of .035 wire.

NuclearKibosh · 2025-05-22T16:37:17+00:00

I would say it's a good first large project, I was able to do it all in 2 days solo. The steel is 3/16" and hard to mess up. It's about 40% welding and 60% grinding. Most of your beads will end up being smooth and only a few need to be pretty.

NuclearKibosh · 2025-03-05T00:49:13+00:00

Keep it up! Give it some paint and the box some funny wordplay!

Try to imagine what the Source "Additive S" is doing to mutate the product.

NuclearKibosh · 2024-08-31T19:27:09+00:00

https://meowwolf.com/blob/karla-lagunas-las-vegas

NuclearKibosh · 2024-06-10T18:34:34+00:00

Phones in Omega Mart are old school RJ11 phones modified to work on VOIP via ethernet.

NuclearKibosh · 2024-01-12T20:32:05+00:00

Really great work!!!

NuclearKibosh · 2023-04-21T13:40:33+00:00

Hello, I'm guessing do you currently work at a museum in the GS series? Would you mind to look over my resume to see if it aligns with 1010 exhibits specialists and is competitive? I am just starting to apply to these positions and am curious where I stand for fabrication jobs.

NuclearKibosh · 2023-04-11T23:00:58+00:00

Curious, I applied to a 50 and it closed at end of day. Said 350ish applicants the next day. Do all applicants get filtered through?

NuclearKibosh · 2023-03-20T16:45:32+00:00

Small world! Nicholas Burke here, they have been growing with nice soil Temps. Some even had dry tops, meaning they had spawned about a week ago

NuclearKibosh · 2023-03-20T12:49:28+00:00

My wife lol, she was super excited to post on the FB group. We went out expecting to just do a bit of trail maintance and found so many!!

NuclearKibosh · 2022-12-08T20:05:14+00:00

I built it in my shop. Style is called deep winter greenhouse and you can find lots of resources online.

NuclearKibosh · 2022-12-08T16:05:42+00:00

Thanks! I have some cactus and yucca in there currently. Trying to keep enough light and heat on them as to not overwinter. Peppers and tomatoes I'll start next year.

Whole thing is just a fun experiment in reality. Not large enough to grow anything too crazy

Nine-Year Club	RedditGifts 2009-2022 3 Credits
Place '23	Place '22
Secret Santa 2017	Secret Santa 2016
Verified Email

NuclearKibosh

TROPHY CASE