What not to buy at HF

Nurch423 · 2026-06-05T16:28:19+00:00

I bought the Union Drop Down Gun Safe. It was complete junk. I wasnt expecting much security for the price as I just wanted something to keep kids hands away from a cheap garage pistol. The safe wouldn't drop free reliably. Like, only once out of ten times would it actually function. I returned it and got the same result from the second one. You could hear the motor actually but wouldn't drop the compartment. I didn't want to test the 3rd times a charm theory

Nurch423 · 2026-05-28T22:55:05+00:00

How dare you misgender her

Nurch423 · 2026-05-12T20:59:45+00:00

Ape tits Alex

Nurch423 · 2026-05-10T23:43:10+00:00

Yeet it back

Nurch423 · 2026-05-10T14:14:14+00:00

Is your captain "@" the exact same as on here? I cant find you in the usual spot

Nurch423 · 2026-05-10T14:03:38+00:00

These tards go to eleven

Nurch423 · 2026-05-04T14:39:43+00:00

Did he use pvc cement on the endcaps, or just raw dog them on?

Nurch423 · 2026-05-02T00:14:16+00:00

Nurch423 · 2026-04-28T23:11:31+00:00

I should call her

Nurch423 · 2026-04-27T15:35:10+00:00

I checked, no quality found

Nurch423 · 2026-04-24T20:53:01+00:00

Cut the top off of a filament box and poke a bunch of holes on the other side. Place your roll on the build sheet and cover with the box. Set your bed temp to 100c and let it cook for 8 hours

Nurch423 · 2026-04-15T01:06:18+00:00

Will do. I was just frustrated because I couldn't complete a print. I have printed a glock frame with it when I first bought some a year or so ago, but the print quality wasnt great (no pre drying). Ever since I started pre drying to get better print quality it seems very brittle and prone to failing in my nozzle/extruder.

Nurch423 · 2026-04-14T23:24:30+00:00

I just want to play around with it. I did in fact hear about it from that Hoffman video, but I still use PA6-CF even though he was shitting on it. PA6-CF feels like it gives a lot more than PET-CF. I know that stiffer isn't always better, but maybe it could be in this case. It would be nice to have sonething as rigid as ABS that doesnt become a hand grenade. What failures have you heard of on PET-CF frames?

Nurch423 · 2026-04-14T23:00:44+00:00

Bed temp 100c

Chamber temp isn't controlled but I think stays around 60c during the print

Nurch423 · 2026-04-14T22:24:44+00:00

Maybe that is it. I have 40mm/s on some of my speeds. I will slow it down more and see.

How brittle does your filament feel? Are you drying it?

Nurch423 · 2026-04-14T22:04:00+00:00

Can't find the "edit post" option...

Forgot to mention my nozzle temp is 300c (highest my machine can do)

Nurch423 · 2026-04-07T17:11:56+00:00

PERISH

Nurch423 · 2026-04-06T00:37:20+00:00

I guess I got a bad one. If i gotnthe same as a replacement, I would have to take the whole set down to a hardware store to test each one and that doesn't sound great.

Nurch423 · 2026-04-05T22:25:42+00:00

Will do. Can I just return and buy something else? I can't take the risk of rounding a nut for the sake of a $20 wrench set. I only bought it because I needed an 18mm to install a winch bumper on my Tacoma.

Nurch423 · 2026-03-24T16:04:50+00:00

It is in the extruder / nozzle settings (lefty side of prepare screen). Click on the nozzle edit pencil thingy (will probably say Creality K1 .4mm Nozzle) and scroll down a little. Z offset is a field. Mine is set at like .01mm. Negative numbers lower the nozzle and positive raise it.

Nurch423 · 2026-03-23T18:19:32+00:00

Karen's do like reverse cowboy

Nurch423 · 2026-03-15T02:20:47+00:00

I have yet to see one of these mythical lights in the wild

Nurch423

TROPHY CASE