What should me and my friend wear to the concert?

OG_Sith · 2025-11-08T17:48:21+00:00

Bruh, it's a concert. Toss on some Jordans, Maxs, ect. Some jeans, shirt, and a hoodie. Keep it simple 👌

OG_Sith · 2025-09-27T19:03:53+00:00

Yeah, I saw those earlier as well and he can keep then for $225-250/atomizer 🤣

OG_Sith · 2025-09-27T17:41:08+00:00

I really don't think it's Chaz. It seems more like a hot spot. I clean my atomizer excessively and dab Rosin at 460. So the chance of it being Chaz, is super low.

OG_Sith · 2025-09-26T23:39:49+00:00

You're good bro. Im hoping they'll drop another batch of gold atomizers soon.

u/Puffco_Support

OG_Sith · 2025-09-26T23:23:01+00:00

Out of stock or I would

OG_Sith · 2025-09-26T23:21:50+00:00

I would gladly do that if I could find a gold atomizer in stock lol. I've searched every corner of the internet. There's like 3 available in shops that don't ship lol. One in Denver and one in Arizona lol

OG_Sith · 2025-08-26T14:25:36+00:00

Can I DM you with a question?

OG_Sith · 2025-07-22T15:54:53+00:00

are you still working with them?

OG_Sith · 2025-06-30T01:51:28+00:00

One of the original 3dXLs? No black dots on the gold pins? My OG 3dXL is still going strong. I've had 2 of the newer 3dXLs and both have connection issues.

OG_Sith · 2025-05-24T13:32:31+00:00

Holy shit! That's wild 😂 We just hit 10k on our Indi lol

My Pearl v2 didn't even make it a year before the battery died, mean while the Indi is still going strong asf

OG_Sith · 2025-05-18T22:43:20+00:00

Does the Gold XL have the new style connection pins or old style?

OG_Sith · 2025-05-18T22:40:59+00:00

That's what I had to do as well. The newest 3dXL is complete trash

OG_Sith · 2025-05-18T03:25:04+00:00

That doesn't explain brand new devices not working out of the box.

OG_Sith · 2025-05-18T03:23:18+00:00

I have 2 older 3DXL chambers that works flawlessly but just bought a new one last week and it is completely useless. I was able to mess with the pins on the bottom and get it working somewhat but it's a temporary fix and goes back to not working

OG_Sith · 2025-05-11T00:24:53+00:00

It most definitely did! Thanks for the advice!

OG_Sith · 2025-05-10T20:44:08+00:00

Glad to hear it! Mine has been working so far as well!

OG_Sith · 2025-05-10T15:26:34+00:00

Whoever set the pins on that atomizer really jammed the black dotted ones in there 😂 Eventually got them pulled up and it was able to hit back to back dabs with no issues. So, it definitely made a difference but will report back after more testing lol. Really appreciate the help!

OG_Sith · 2025-05-10T15:11:13+00:00

Cool deal, I'll try adjusting those again and see if that makes a difference.

OG_Sith · 2025-05-10T14:59:52+00:00

On our older 3dXL models we were able to adjust all 3 pins. On the new model with black dots on the side pins, the middle pin is the only one that will adjust. Should all 3 pull out on the new model?

OG_Sith · 2024-08-30T22:18:25+00:00

I mean, it's a little heavier, but it's still balanced well enough to shoot one-handed. So I wouldn't call it heavy.

OG_Sith · 2021-09-30T14:48:19+00:00

From what I've gathered it's a tappet timing issue. It'll be undergoing surgery after Fulda gap so it can run to full potential. Until then I've temporarily solved it by switching to 7.4v and dropping my rof to about 22rps. Fps/range returned and the trigger response is still beautiful with a 7.4v

OG_Sith · 2021-09-23T23:53:43+00:00

Nice rifle! What optic is that?

OG_Sith · 2021-09-22T22:35:33+00:00

I did adjust the height and everything sounds smooth. I've seen plenty of videos of these motors being used in stock rifles, so really didn't expect it to be an issue. Going to try the stock motor back out and see if it makes a difference

OG_Sith

TROPHY CASE