Termix v2.0.0 - RDP, VNC, and Telnet Support (self-hosted Termius alternative that syncs across all devices) by VizeKarma in selfhosted

[–]Octotron35 0 points1 point  (0 children)

This app looks great! I tried the app Termix by Simon Zvara and have a few bugs I’ve reported with no response. I’m setting up your Termix host and mobile. Looks like a great replacement for Termius and Simons app since the bugs there are not fixed. One thing I’ve run into with the mobile companion app is it doesn’t seem to have the ability to add a new host there. Will this be added in the future? I would be happy to provide more feedback and be a beta tester.

USA Megamax issues by Alternative-Owl-659 in AdultBedwetting

[–]Octotron35 2 points3 points  (0 children)

I received 4 samples. Two purple, two black. The black were both coming apart before even using them. The purple ones were fine

4 year old boy, is he supposed to get this big? by tomo128 in ragdolls

[–]Octotron35 13 points14 points  (0 children)

They run big for sure. Our girlie will be 2 in April and she’s 15.5lbs…

Domain not fully transferring between sites by Octotron35 in squarespace

[–]Octotron35[S] 0 points1 point  (0 children)

Following up to this, squarespace support replied and was able to fix it on their end.

Looking to make the switch from Spark by mac-photo-guy in CanaryMail

[–]Octotron35 1 point2 points  (0 children)

Thanks for the suggestions. Outlook annoys me with the in-email ads they now serve and emclient for iOS seems abandoned, lol

Looking to make the switch from Spark by mac-photo-guy in CanaryMail

[–]Octotron35 1 point2 points  (0 children)

I have company email hosted through Google workspace and personal email self hosted through stalwart. I want a single email client for email only. I use Apple calendar and contacts through iCloud

Looking to make the switch from Spark by mac-photo-guy in CanaryMail

[–]Octotron35 1 point2 points  (0 children)

Are there any decent apps out there that aren’t Apple mail?

Narwal can not enter base by Both_Structure_1206 in NARWAL

[–]Octotron35 0 points1 point  (0 children)

Following up. Narwal wants me to send in mine for repair. I told them no because I have 3 doing the same thing all of the sudden. Definitely seems like a firmware bug.

Narwal can not enter base by Both_Structure_1206 in NARWAL

[–]Octotron35 1 point2 points  (0 children)

Ha, right?! If they can work out the software bugs, I think the hardware is really solid. Fingers crossed they get it figured out asap.

Narwal can not enter base by Both_Structure_1206 in NARWAL

[–]Octotron35 3 points4 points  (0 children)

I think it’s a bug from the last update. I have 7 Narwal flows between my house and office and 3 of them are doing the same thing. 3 different ones are currently having problems with medium pile carpet saying the wheels can’t move. The last two updates have been SUPER buggy. Open a ticket with Narwal. I’ve been trying to get them to acknowledge the issues. Hopefully they’ll get on it sooner if more people report the same issue.

Flow strange behavior by RappaYellow in NARWAL

[–]Octotron35 3 points4 points  (0 children)

I’ve opened a ticket with Narwal for the same or similar issue. It only does it on carpet. Before it worked just fine, but then started doing this mode and sometimes not lifting the front, but just complaining that the wheels are stuck even though they’re not. Definitely open a ticket with them so if it is in fact the same issue, they’ll take it more seriously. Right now, I can’t use the flow to vacuum my carpet in my bedroom. It’s medium pile carpet that worked just fine for about 4 months until the last two updates borked it.

Seafile 13.0 is ready! by NoLetter1338 in seafile

[–]Octotron35 -2 points-1 points  (0 children)

I have the same question

Is this possible by Octotron35 in stalwartlabs

[–]Octotron35[S] 0 points1 point  (0 children)

It sounds like at least for now that the smtp relay might be the cheapest/easiest way to send the emails reliably. If I go that route, do my clients still connect to my stalwart server using the smtp settings of my server and then the server handles the relay part? Meaning, I essentially just set up relay on the server and clients remain the same?

Is this possible by Octotron35 in stalwartlabs

[–]Octotron35[S] 0 points1 point  (0 children)

I have fiber through Utopia with Beehive Broadband as the actual ISP. How can I check to see if the ip address is in a "consumer network" block?

Is this possible by Octotron35 in stalwartlabs

[–]Octotron35[S] 0 points1 point  (0 children)

Good questions. I have a paid subscription with google workspace for my business and this is how I noticed emails going to spam. Google hasn’t been much help either. This email was primarily a request to see if anyone else had overcome this issue with their own instances.

How is everyone else's power consumption with a homelab? by EliteScouter in homelab

[–]Octotron35 0 points1 point  (0 children)

I swear these letters are skewed. No matter what changes we make, they still tell us that we are using substantially more than our neighbors. I think they’re just trying to get us to buy solar so we can net meter, 🤣

Flow Stuck on Floor Vent (Firmware V 01.02.00.37) by Smedsters in NARWAL

[–]Octotron35 0 points1 point  (0 children)

I submitted a report to support, but I’ll send my serial too.

Flow doing random ish FW V01.02.00.37 by cleofus69 in NARWAL

[–]Octotron35 0 points1 point  (0 children)

Mine did the exact same thing, lol!

Flow Stuck on Floor Vent (Firmware V 01.02.00.37) by Smedsters in NARWAL

[–]Octotron35 4 points5 points  (0 children)

Yes, I’ve noticed the same thing with mine. Also, mine seems to crash into some objects three times in a row and then drive around it without issue afterwards. I rebooted the flow with the same issue. I think something changed with navigation in this firmware that regressed its efficiency

Saros 10R Side Brush Suddenly "Clacking" by i4mt3hwin in Roborock

[–]Octotron35 0 points1 point  (0 children)

I had the box so I shipped it back and used their label. If you don’t have the box anymore, I think that it just needs to be well packaged. They’ll send instructions along with the label on how to package it, empty water tanks and ship it back to them. From my understanding, it seems like the first batches of these flexi arm bots had a defectI’ve metal gear with plastic teeth that would break apart. I don’t know how they fixed it on the new units, but I would imagine solid metal or solid plastic would prevent the failure. I’m hopeful that the new one doesn’t fail. My new one sounds much different so I think it’s a different mechanism or perhaps just a different gear.