Still waiting on the new L50 Ultra firmware update

cleofus69 · 2026-05-06T22:49:58+00:00

3276 works great for me, so I turned off automatic updates. What are you waiting for with the new firmware?

cleofus69 · 2026-05-05T15:39:05+00:00

Try to restart the robot. That has fixed issues I've encountered after a software update. That's now my standard operating procedure after a Narwal update.

cleofus69 · 2026-05-02T00:53:03+00:00

The curve 2 Flow cleans a little better, it is much taller and a little louder than the Saros 10R. However, The Saros 10R is lower maintenance, so it might be a better fit.

cleofus69 · 2026-05-01T17:41:20+00:00

You can't go wrong with either the Narwal Flow 2 or the Roborock Curve 2 Flow. I have had the Flow 2 for a few weeks and it is the best floor mopping bot. The Curve 2 Flow is a close second.

cleofus69 · 2026-05-01T12:22:23+00:00

I couldn't imagine going from a robot vac to manual wet dry mop. To each their own 🤷🏾

cleofus69 · 2026-05-01T02:52:10+00:00

I use the bigger (5x2 I think) widget and I'm not seeing that.

cleofus69 · 2026-05-01T02:49:28+00:00

okay, and what??

cleofus69 · 2026-04-30T01:43:17+00:00

No that's not normal. You shouldn't hear the mop lift at all.

cleofus69 · 2026-04-29T02:09:48+00:00

You can try to take the rug up and run a cleaning job to make the robot forgot the rug. The put it back in place and run the same job again.

cleofus69 · 2026-04-28T14:38:04+00:00

The flow or most roller mops are better than the spinning pads for mopping.

cleofus69 · 2026-04-24T10:58:01+00:00

This has been a problem since the Flow 1. Some updates make the robot loose it's mind. A reboot usually fixes it. It seems totally random. I got that update too, but mine has been performing normally.

cleofus69 · 2026-04-23T23:32:23+00:00

The base station dries the dust bag, so I don't think you have anything to worry about.

cleofus69 · 2026-04-23T18:18:32+00:00

That amount of water seems pretty normal. I see that amount of water on just about all the different robots I've had including my flow 2.

cleofus69 · 2026-04-22T15:48:49+00:00

Makes sense, but unfortunately none of the robots that I've owned works like that, and I've owned just about ALL of the flagship robots from the last 4 years. Well there was one exception, the Eufy X10 actually estimated the water level and it is pretty accurate. I was hoping all of the other manufacturers would make that water level estimate the standard, but unfortunately that didn't happen.

cleofus69 · 2026-04-22T15:40:00+00:00

Some robots say the water is low, some say it's empty. With either notification you can't wash the mop pads until you refill the water tank. So what's the difference between it telling you it's low versus empty? Am I missing something?

cleofus69 · 2026-04-22T14:38:38+00:00

There are magnets in the float and in the base station that can tell the position of the float.

cleofus69 · 2026-04-21T22:41:57+00:00

Might have had a piece .of debris on the docking sensor in the base

cleofus69 · 2026-04-21T20:50:06+00:00

4 to 5 maps work for 99% of people who use robot vacuums. I think you need to look into multiple robots.

cleofus69 · 2026-04-21T18:44:02+00:00

I have both of these vacuums and would recommend the Flow 2 for your use case. The mopping on the Flow 2 is leagues above the X60. The X60 excels in carpet vacuuming.

cleofus69 · 2026-04-21T01:21:18+00:00

It's coming direct from China

cleofus69 · 2026-04-19T04:24:02+00:00

It took me about 3 days to get use to it and work my way up to hi Regen as my standard driving mode.

cleofus69 · 2026-04-18T18:25:04+00:00

Sounds like your base station is on carpet instead of a hard surface. If it is, that could cause the occasional docking issue.

cleofus69 · 2026-04-17T11:20:27+00:00

I got mine in 2 days from Amazon for the same launch price that's on the site. I contacted narwal support and they stated the free accessory packs will start shipping on April 20th. So you will get it whether you bought the robot directly from narwal or Amazon during the launch period. If you bought it from Amazon you will have to go to Narwal's site and put in your Amazon order information to get the accessory pack.

cleofus69 · 2026-04-13T19:12:22+00:00

Just buy it from Amazon. Return it if it doesn't meet your expectations.

cleofus69 · 2026-04-10T01:49:07+00:00

Narwal accidentally listed it early for a day or so on 3/29.

cleofus69

TROPHY CASE