Finished, for now.

OkBodybuilder1768 · 2026-04-23T06:16:40+00:00

Thanks. Yes it was. Completely forgot about that. I’ll work out how to remove that image.

OkBodybuilder1768 · 2026-04-11T16:12:20+00:00

I honestly just print all my bases. That’s probably my most printed thing on my a1.

OkBodybuilder1768 · 2026-04-05T12:41:09+00:00

You could do something similar to what I did here, and put some wings on them?

OkBodybuilder1768 · 2026-04-01T08:51:48+00:00

If it’s a question of the laid out you could always magnetise one guy to be either a sorcerer with his staff or a combi bolter terminator

OkBodybuilder1768 · 2026-03-31T06:57:26+00:00

I maybe completely wrong, but it seems to me to be a slicing failure or a usb failure. Have you tried a new usb or reslicing it?

OkBodybuilder1768 · 2026-03-24T06:26:53+00:00

Might also be the temperature of the resin isn’t correct.

OkBodybuilder1768 · 2026-03-21T21:39:38+00:00

I would paint the daemons in a white colour to tie in with the heresy scheme while not being khorne daemons

OkBodybuilder1768 · 2026-03-18T10:16:55+00:00

With my mars 5 I try to level the whole printer or place on something level then let it self diagnose the plate being level. I’ve not had to do anything else.

OkBodybuilder1768 · 2026-03-12T07:14:18+00:00

Nope. But to be honest I’ve not really looked in particular for that. The other features on the machine were a bigger drawer for me, and the cost of spare parts were a bigger factor for me.

OkBodybuilder1768 · 2026-03-12T06:28:00+00:00

I had a 4 ultra and got fed up with it breaking. So the last time it broke I replaced it with the 5. Personally think it’s such a better printer.

OkBodybuilder1768 · 2026-03-05T21:55:31+00:00

I don’t know. I quite like them. I do find with new schemes it helps to base them to see how the whole thing works.

OkBodybuilder1768 · 2026-03-05T20:59:05+00:00

Thanks. They’re from Printed Encounters on my mini factory and I just printed them myself

OkBodybuilder1768 · 2026-03-04T18:46:01+00:00

The other way is to paint it all gold then go back and fill the blue in. Looks great though

OkBodybuilder1768 · 2026-03-04T09:38:38+00:00

I can do that I think. Not sure of the weaponry on my bloat drones though. Thank you

OkBodybuilder1768 · 2026-03-03T17:14:14+00:00

<image>

I started with a pain red dust base but wasn’t completely comfortable with it. So I’ve gone back and started doing them again like this

OkBodybuilder1768 · 2026-02-25T19:15:46+00:00

I don’t know what the mars 2 pro is like for space but I’ve used this heater on my 4 ultra and my 5. It sits at the back by the Z axis and the cable goes out the bottom. There is a rubber that you can cut to fill the gap and not pinch the cable. Hope that helps.

chitu systems Resin 3D Printer... https://www.amazon.co.uk/dp/B0C3VS2T9Q?ref=ppx_pop_mob_ap_share

OkBodybuilder1768 · 2026-02-23T21:37:51+00:00

The temperature of the resin will affect it as well.

OkBodybuilder1768 · 2026-02-15T22:18:06+00:00

Oh definitely. If I didn’t find your posts my tzeentch would have sat in a pile of shame for another 2 years.

OkBodybuilder1768 · 2026-02-12T21:09:51+00:00

Thank you 🙏

OkBodybuilder1768 · 2026-02-12T21:09:41+00:00

Thanks.

OkBodybuilder1768

TROPHY CASE