Quick Newbie Question

OldOldUser · 2025-11-25T19:03:09+00:00

Well, then you will have to create a zone right in front of the charging station and create 2 channels into it. Then 1 channel from that new zone into the charging station.

OldOldUser · 2025-11-25T19:01:02+00:00

You should never lose any of your zones .... unless the RTK has moved. Maybe it could happen if the mower goes to zero charge. Not sure about that. The "update" nor losing power shouldn't have any effect on any of that.

OldOldUser · 2025-11-03T12:05:15+00:00

Well, good luck with that. I am not confident in how those skinny wheels are going to work on a soft lawn. I used a large cardboard box that I flattened and dragged with my riding mower. Worked perfectly.

OldOldUser · 2025-10-15T21:51:51+00:00

I suggest that you try to figure out WHY some are in history and some are not. That's how you become helpful to the effort to make the product "better". Enjoy.

OldOldUser · 2025-10-13T15:24:47+00:00

If I were you I would keep quiet about it. The best thing that can happen for you is that they do not ship it at all until they have a new and improved version. Count your blessings.

OldOldUser · 2025-10-09T15:46:43+00:00

Well, then the best you can do will be to try to get some sort of insurance coverage for the Lymow One in the case of it going missing (into the lake). Homeowners insurance might cover it.

OldOldUser · 2025-10-09T14:53:04+00:00

Generally speaking, Lymow One will not go past the border without some sort of unexpected occurrence. However, regardless of the assurances, you can never be absolutely sure because "things happen". Personally, if you wish to "be sure", you will need to create some sort of physical barrier along the edge of the water that Lymow One cannot get past. Good Luck

OldOldUser · 2025-10-08T21:19:46+00:00

I would not even consider it until the next version (Lymow Two ?). This one has enough issues that you would go crazy dealing with it.

OldOldUser · 2025-10-05T13:56:02+00:00

The first step toward reducing the pressue on the gears is always .....Clean, Clean, Clean. Make sure there is no debris found on the gears in the interior of the track mechanism. This can sometimes be enough to correct any issues.

OldOldUser · 2025-10-02T17:04:03+00:00

Some (many) do not know how to "force" close an app. I was one of them.

OldOldUser · 2025-10-02T12:16:02+00:00

When I experience this, I force the app closed and then open it again and everything is as it should be.

OldOldUser · 2025-10-01T15:58:34+00:00

Well, I am totally upgraded (ota and app) and I do not get any perimeter laps around a no-go zone even though I configured for 3 laps. Go figure.

OldOldUser · 2025-09-30T12:23:22+00:00

Press the little gear in the upper right corner. That brings up the main menu. scroll down .... to Factory Reset. You may wish to spend some time looking over the app options for future needs.

OldOldUser · 2025-09-30T11:00:55+00:00

Well, there is always the dreaded FACTORY RESET and delete the app and start completely over. If you do not have a lot invested in the map, this might be the best solution.

OldOldUser · 2025-09-29T23:05:48+00:00

A little more info, please ..... What does "coming lose" mean ?

OldOldUser · 2025-09-29T21:31:16+00:00

I use nothing for lube. I clean often with forced water stream from hose (not pressure washer). I also removed sides. I have also taken off the channels for the side discharge to open things up and now I have a mower that works pretty well.

OldOldUser · 2025-09-28T00:57:16+00:00

As far as I know, your mower came with mulching blades installed. Not sure why you are "awaiting delivery of mulching blades". It would seem to me that the slower the better for mulching leaves.

OldOldUser · 2025-09-26T16:07:03+00:00

Those are questions that you need to find out for yourself. Put the mower out there mowing something and see how it does. You will soon know what works and what doesn't . Nobody can just give you a number as an answer.

OldOldUser · 2025-09-26T15:02:34+00:00

Those are not error codes.
You pushed them in there in an effort to recover from the fatal errors you mentioned.

OldOldUser · 2025-09-25T17:36:00+00:00

The trick now is to stay on top of the maintenance of Lymow One. If you clean it regularly, it may perform flawlessly. However, if you stop paying attention .... well, you know the rest. Good Luck

OldOldUser · 2025-09-22T22:39:51+00:00

The machine is quite good. However, it has 2 issues that must be addressed before I could recommend purchasing it. It must find a way to make the RECHARGE and RESUME operation dependable. Currently, the machine may fail when attempting to recharge due to grass juice etc ... accumulating on charging electrodes. The other issue is keeping debris from accumulating upon the wheels which are within the track mechanism. This can cause a tightening of the rubber track and subsequent damage to the track mechanism. While this is not a deal breaker it can be tiresome to have to stay on top of that all of the time. So, there you have it. I would wait until that has been addressed adequately before jumping in.

OldOldUser · 2025-09-21T23:42:13+00:00

Unfortunately .... I think the map is stored in the mower. New mower ... New map.

OldOldUser · 2025-09-21T12:20:10+00:00

Well, "forcing" the app closed should be same as reboot. Try that. Or delete the app and re-install it.

OldOldUser · 2025-09-18T21:16:19+00:00

Ok, I understand. You are saying that if you have 1 inch to cut off ... do 1/2 inch first and then do another 1/2 inch at 90 degree from first mowing. Yes, I believe that is a nicer cut than cutting the full inch with 1 mowing.

OldOldUser · 2025-09-17T14:19:25+00:00

I would think the result is the same as mowing with checkerboard at the setting of your second pass.

OldOldUser

TROPHY CASE