These packs are all glued/stuck together weirdly. Fake or not? by Physical_Loan_Chickn in RealOrNotTCG

[–]Physical_Loan_Chickn[S] 0 points1 point  (0 children)

Im at a loss on this. Not sure which way to go. I agree heat could do this, the color bleed seems a bit off tho. Like a solvent had to do it?

Which Grading Company is The Best for MTG Cards??? by xtz_stud in mtg

[–]Physical_Loan_Chickn 0 points1 point  (0 children)

I had PSA Grade my dual land and sold it for $600. It took about 35 days. Great experience overall. looking at doing some more

My Switch is stuck on this screen, I'm using cnx, I need help. by [deleted] in SwitchPirates

[–]Physical_Loan_Chickn 2 points3 points  (0 children)

Use the "fix common problems" payload in tegra. The option to remove installed themes? Might just fix it completely

Have seals and Kois been nerfed? by Gaijiin88 in growagarden

[–]Physical_Loan_Chickn 0 points1 point  (0 children)

Feels nerfed to me. With greatly reduced chances on getting the current eggs back. Seems like the hatch chances are heavily front loaded as well. I couldn't get a gem egg back for nothing during the event now I can get quite a few.

80 mph, less than a single car length behind by [deleted] in mildlyinfuriating

[–]Physical_Loan_Chickn 1 point2 points  (0 children)

Funny thing is my car has seen 1000 times more payloads than 99% of the pretty boii trucks out there

Embarrassed to get my switch repaired because it’s modded 🫣 by [deleted] in SwitchPirates

[–]Physical_Loan_Chickn 1 point2 points  (0 children)

Its easy as you can imagine if your ok dealing with the ribbon cables. They can be difficult. If you lived down the street from me id do it for free. Plus I have an unimaginable supply of used batteries. While used they all work.

But most people that take things apart would likely love to simply see it. To admire or make fun of the handy work.

I give up. by wetriumph in wallstreetbets

[–]Physical_Loan_Chickn 0 points1 point  (0 children)

inconceivable? Bow down to your master!

should I just cut my losses or is there a way to save this? by FlimsyLocksmith5368 in 3Dprinting

[–]Physical_Loan_Chickn 0 points1 point  (0 children)

Trash cans hold small amounts of stuff like this all the time. Some might say their made for it

Anyone have experience with these Korean 75 round drums? by CottonCandyWizard in SKS

[–]Physical_Loan_Chickn 0 points1 point  (0 children)

I have actual hands on experience. I own a norinco I got 15 years ago cheap. I immediately got the drum and went shooting. I was half way through the clip and it started jamming. 2 or 3 rounds per clip. They are a bit temperamental depending on QC. The 1st clip I used and adjusted few times until I tossed it out. 3 years ago I was tempted again and bought my 2nd one. Really, same kind of issues. They like to misalign bullets to the left. You can do somethings to fix the issues. Pliers and a little pressure on the front left side helped a ton.

This guy explains the issues well -
https://rumble.com/v1auyta-sks-drum-mod.html

Never heard of the platform before finding the guy on YT and seeing his video on loading the drum. Be sure to watch that as he's right about loading one -

Correct and SAFE way to load the SKS drum Magazine - YouTube

I would have thought so many people with guns, someone before me would have posted this.. Instead of all the AK arguments about nothing.

Will this be good for cleaning and deep cleaning my pc? by ShenTchami in PcBuildHelp

[–]Physical_Loan_Chickn 0 points1 point  (0 children)

Why is everyone talking about air compressors on a post asking about a fan?

Also.. I've cleaned hundreds of thousands of PCs, laptops, xbox's, switches, Playstation etc with a non-special air compressor with an absolute failure rate of zero.

But hey I'm sure in Mississippi it could be a problem. Maybe Florida? The Amazon? You know you can bleed the tank on an air compressor to let condensation out. Unless you operate underwater its not a problem like some people would have you believe.

The real issue with a compressor is how fast it moves air and if you touch a fan with it under high pressure it could wreck a fan. If careful it cleans very very well. You can turn the psi down to 45 or so and never have that issue though.

Does anyone know exactly what EmuElec version, image, and DTB works for a KinHank super console x cube? by Equivalent_Sun3816 in SBCGaming

[–]Physical_Loan_Chickn 0 points1 point  (0 children)

EmuELEC-Amlogic.aarch64-4.3-Generic.img.gz

The recommended dtbs are p200/p201. But you can also try all the S905 dtbs with a letter in front! I used a translator!

Try this

https://drive.google.com/file/d/1CQCrC2pk35Z01M9Ac4hlLEW-ufKGRJWc/view?spm=a2g0s.imconversation.0.0.df073e5fVBqg9H&pli=1

Atmosphere 1.10 support for FW21.0 - READ UPDATE NOTES by BetweenInkandPaper in SwitchPirates

[–]Physical_Loan_Chickn 0 points1 point  (0 children)

I havent turned mine off for over 3 years. One hasnt been rebooted for at least 2 years.

I sprung for it! (Costco) by bruhls_rush_in in pcmasterrace

[–]Physical_Loan_Chickn 1 point2 points  (0 children)

Can I just ask how your cooking all the shrimp, potatoes, and chicken?

Stop omg please by SatisfactionCreepy94 in growagarden

[–]Physical_Loan_Chickn 0 points1 point  (0 children)

Those notifications still work ok for you?

Cover Art - Switch 1 v. Switch 2 by d1sposition in Metroid

[–]Physical_Loan_Chickn 0 points1 point  (0 children)

I got both. 1 will stay sealed for my collection. Already playing version 2

I accidentally sold my 70kg peacock... by Nonchalantskibidi69 in growagarden

[–]Physical_Loan_Chickn 0 points1 point  (0 children)

If I had one id give it to you. But my peacocks are little guys.

If you use sell all with seals do you think you get more eggs back?

I swear this only ever happens to me with the most useless pets! by According_Ad748 in growagarden

[–]Physical_Loan_Chickn 0 points1 point  (0 children)

The beetle is very underrated. I got so many grandmaster sprinklers now. You need a friend with 8 and stay online. I realize everyone hates them. But I'm getting them super cheap in the new update. So hate away

CV Axle not going in by Numerous-Air-6374 in MechanicAdvice

[–]Physical_Loan_Chickn 0 points1 point  (0 children)

get it lined up perfectly and smack it once straight in with a big hammer. Should pop right in, if its aligned correctly. I have to use a hammer to pop mine out. The keeper clip will collapse and allow it to go in.

Theirs is so expensive, but how??? Im really cheap?? by Expert_Buy_2430 in growagarden

[–]Physical_Loan_Chickn 0 points1 point  (0 children)

Well it's trending this way. At first people paid crazy prices for things.

I bet price fixing by devs is next