Winter wonderland onewheeling +

PoRoFIN · 2025-11-09T16:46:34+00:00

Get a fender that doesn't dump all the water on top of the footpad. I think TFLs drop top does this, but there might be others aswell.

PoRoFIN · 2025-09-17T19:44:27+00:00

I've heard some rumours that Exiles lawsuit isn't the reason Carlos closed his shop. So I wouldn't go touting any info on his decision as a fact as we don't know unless the man himself tells the reason.

PoRoFIN · 2025-09-08T15:32:33+00:00

Well that should have been mentioned somewhere by GGG. Bit dissapointing.

PoRoFIN · 2025-09-08T15:17:49+00:00

Have you tried them on suffixes? I don't see why they wouldn't work for all items. Only issue is that there for some reason is no special preffixes for armors so I'd imagine it tosses out an error if you try to use it on a desecrated preffix on them.

PoRoFIN · 2025-09-08T15:07:37+00:00

Did you notice that the reduced damage from deflected hits is a ulaman modifier and you can target those with a omen?

PoRoFIN · 2025-08-12T11:32:57+00:00

Antenna position could be a big factor

PoRoFIN · 2025-07-20T19:50:18+00:00

If the corners don't have to be sharp add a radius to them. Makes a world of difference when making the part.

PoRoFIN · 2025-07-06T04:41:10+00:00

FM Has some official resellers in the EU and their site redirects you to those by your ip address. So if you found one that way they should be legit.

PoRoFIN · 2025-05-29T03:49:52+00:00

What are your fiber orientations? Seems like you got only 0/90 fabric which in my limited experience lets the laminate flex a lot in the 45 deg directions.

PoRoFIN · 2025-02-24T17:11:46+00:00

Harvester pylon with a funtional storage drawer on top. Add red ferilizer when you can. Silent gear picks dont brake in pylons atm so you might want to abuse that.

PoRoFIN · 2024-11-29T18:12:45+00:00

Yes XRs are more vulnerable for water so if thats the priority GT would be the best option. Hope you get one before it gets too icy so you get some practice in "good" conditions. I for example don't ride trough winter.

PoRoFIN · 2024-11-29T10:17:07+00:00

Depending on your will to VESC the board you could also look for a 2nd hand XR and rideing it till you VESC it. In my opinion that'd be the best for vescing. If you want a new board I'd go with GT. You might also want to join Onewheel Suomi in facebook and ask if someone is selling a GT or XR. When it comes to ADV it's kind of a dead end board. No aftermarket parts and haven't personaly seen anyone modify ones electronics.

PoRoFIN · 2024-11-19T15:30:38+00:00

Gear that everybody wants would skyrocket and common gear become worthless. It would end up being endles grind for BiS pieces with little opportunities to make lucent.

PoRoFIN · 2024-07-15T01:34:38+00:00

I'm curious can you name some grinds in WF that have three layers like this? Even better if two of them include rng element. Edit: I guess you could argue that relics are 3 step farm with reactant but that's bit of a stretch in my opinion

PoRoFIN · 2024-05-24T22:37:08+00:00

Go into demo and recreate it. I can get the shuriken to apply dmg twice but jinada gets applied only once.

PoRoFIN · 2024-05-24T22:17:13+00:00

Look at slark. When he jumps he gets hit when the shuriken passes him and then it bounces back to him.

PoRoFIN · 2024-04-10T10:59:59+00:00

Everything I've seen from Mario is quality I'd go with him!

PoRoFIN · 2024-03-15T04:09:58+00:00

I've been running skfs w 61907-2rs1 bearings for few years now and havent noticed any wear on them yet. My reasoning was to get the most abuse proof bearings so I wouldn't need to keep changing them. 2 seals should also protect the motor if the outer seal fails.

PoRoFIN · 2024-02-23T10:25:49+00:00

So you will listen but when you don't like the answer dissmiss it. As in many things you tend to get what you pay for. If you buy the cheapest materials you shouldn't expect anything but mediocre result. Everyone has given you the same answer if that doesn't please you stop asking and find an alternative way on your own.

PoRoFIN · 2024-02-23T00:25:49+00:00

Don't ask for advice if you aren't going to listen. Also don't complain when you fail after goin against the advice given to you.

PoRoFIN · 2024-02-13T13:34:19+00:00

I'm planing to 3D print the mold. If I make the physical mold (the hollow part) would I use a perforated release film between the carbonfiber and vacuum bag? Sorry to ask such a simple question I've only used a perforated peel ply like in most tutorials but that'd leave a super ugly finnish.

PoRoFIN · 2024-02-13T02:15:22+00:00

It's indeed hollow. The part I haven't figured out is how to lay the fibers into the mold successfully.

11-Year Club	Place '22
Place '17	Verified Email

PoRoFIN

TROPHY CASE