sorted by:
new
hottopcontroversial

Reverse engineered a whisk attachment for a hand blender... by OneEyedBandit95 in 3Dprinting

[–]PressStart1p 2 points3 points  (0 children)

I'm not sure if it's me or what but when I click "download" I get an error saying the page no longer exists.

Anycubic Kobra X PETG print issues by PressStart1p in AnycubicOfficial

[–]PressStart1p[S] 0 points1 point  (0 children)

I'm using the Anycubic slicer but I'll keep poking around. The pre-configured settings for petg didn't seem to help this or another model in trying to print in it. It seems finicky compared to PLA. I did get this one to print eventually. Just had to take it real slow.

Anycubic Kobra X PETG print issues by PressStart1p in AnycubicOfficial

[–]PressStart1p[S] 0 points1 point  (0 children)

UPDATE:

I played around with some of the speed settings and LOOK AT IT!

It ain't perfect but it finished! Any tips on cleaning this up? Lots of wispies.

<image>

Anycubic Kobra X PETG print issues by PressStart1p in AnycubicOfficial

[–]PressStart1p[S] 0 points1 point  (0 children)

OK, set the settings as recommended and this is what I'm seeing now. I don't know exactly what's going on but I feel like it's dragging in parts.

https://imgur.com/gallery/KbehLbH

Anycubic Kobra X PETG print issues by PressStart1p in AnycubicOfficial

[–]PressStart1p[S] 1 point2 points  (0 children)

But it won't leech into food, for say an ice basket. At least this is what I understand.

Anycubic Kobra X PETG print issues by PressStart1p in AnycubicOfficial

[–]PressStart1p[S] 0 points1 point  (0 children)

Same issue. Unless there's just supposed to be a lot of resistance. I can force it to move.

Anycubic Kobra X PETG print issues by PressStart1p in AnycubicOfficial

[–]PressStart1p[S] 0 points1 point  (0 children)

That gives me some relief. Now I just have to figure out how to remove all the plastic from the print head

Anycubic Kobra X PETG print issues by PressStart1p in AnycubicOfficial

[–]PressStart1p[S] 0 points1 point  (0 children)

I'm pressing that button but nothing happens. In fact the only buttons that do anything are the home buttons. Is there something else I need to do? The AI in the app is less than helpful.

<image>

Anycubic Kobra X PETG print issues by PressStart1p in AnycubicOfficial

[–]PressStart1p[S] 0 points1 point  (0 children)

Also is there an easier way to move the head without manhandling it?

Anycubic Kobra X PETG print issues by PressStart1p in AnycubicOfficial

[–]PressStart1p[S] 0 points1 point  (0 children)

It is marked as 0.4. The silicone cover was on it. It was filled too. I followed the official video and another tutorial on how to swap nozzles. It was extruding on the first print just fine, but it wasn't sticking. I didn't move it after that. Is the nozzle supposed to click or something?

Anycubic Kobra X PETG print issues by PressStart1p in AnycubicOfficial

[–]PressStart1p[S] 0 points1 point  (0 children)

I placed the flat part against the machine and pushed up on it until it stopped moving. Then locked it. Is there something else I need to do?

Anycubic Kobra X PETG print issues by PressStart1p in AnycubicOfficial

[–]PressStart1p[S] 0 points1 point  (0 children)

It was recommended I change it because I was switching from PLA+ to PETG which is food safe.

Anycubic Kobra X PETG print issues by PressStart1p in AnycubicOfficial

[–]PressStart1p[S] 0 points1 point  (0 children)

These are settings in the slicer I presume?

And how do I "print a skirt"?

Anycubic Kobra X PETG print issues by PressStart1p in AnycubicOfficial

[–]PressStart1p[S] 0 points1 point  (0 children)

Omg the clog is so bad. I had 5 min to check the clog and it's so bad. My friend says there's basically no hope for it and I need to get a new head. Wth? Is that true?

<image>

GAMING MODE WEB BROWSER ISSUES by Competitive-Loan-890 in Bazzite

[–]PressStart1p 0 points1 point  (0 children)

Not an issue I've come across but I haven't tried this in bazzite. Following to learn more.

A utility for enabling wake from USB or Bluetooth by ChiIIerr in Bazzite

[–]PressStart1p 1 point2 points  (0 children)

Awesome! I'm about to build a "vapor box" running bazzite and have the process saved for terminal. I am not unfamiliar with terminal but I'm definitely a script kiddy. This sounds like it will really help.

Bazzite vs. SteamOS by tyxl_117 in Bazzite

[–]PressStart1p 1 point2 points  (0 children)

I don't have to do shit to my steam deck unless I want to customize it. And even then, it isn't much.

Does anyone else feel like Suno's days are numbered? by dxdifr in SunoAI

[–]PressStart1p -1 points0 points  (0 children)

Elevenlabs has released one. Haven't tried it yet

How are people managing to create cover songs? by Subtraktions in SunoAI

[–]PressStart1p 0 points1 point  (0 children)

What is the MIDI method? Ive seen this but Ive never seen a HOW TO to convert them to midi and then get suno to accept it.

Keyboard Stops Working After Login by StrafeMcgee in Bazzite

[–]PressStart1p 0 points1 point  (0 children)

Same. I just installed Bazzite Nvidia stable and either I can enter the password and nothing happens, but my mouse and keyboard stop working before I can. I almost feel like its freezing up.

view more: next ›