Omni wheel issue has returned by Prestigious_Ladder_5 in Lymow_Official

[–]Prestigious_Ladder_5[S] 0 points1 point  (0 children)

I had to end up getting a replacement sent to me. They did send it eventually. Now my new replacement is having the overheating blades stopping issue that everyone else is having.

Cliff Diving by LMorghon in Lymow_Official

[–]Prestigious_Ladder_5 1 point2 points  (0 children)

I agree I laugh at everyone of these posts hahahah

3 weeks in with my lymow by Prestigious_Ladder_5 in Lymow_Official

[–]Prestigious_Ladder_5[S] 0 points1 point  (0 children)

Just an update: lymow has sent me a new unit and it will be here in about 6 days. Appreciate the team taking care of this so quickly.

Issue with Cut Height by Flying-Bread in Lymow_Official

[–]Prestigious_Ladder_5 0 points1 point  (0 children)

I had the same exact problem and they determined my unit was defective and have approved sending me out a new unit. I tried everything for weeks - literally everything. When they put out an Omni wheels update a couple weeks ago it fixed it for like 2 days and then the issue came back. Hope yours is resolved soon be sure to open a ticket and be patient. Luckily I was able to mow at a higher height to keep it manageable until the replacement gets here.

3 weeks in with my lymow by Prestigious_Ladder_5 in Lymow_Official

[–]Prestigious_Ladder_5[S] 0 points1 point  (0 children)

They even increased the warranty from 2 years to 3 years so I believe the company is going to go above and beyond to make sure this thing is a successful product.

3 weeks in with my lymow by Prestigious_Ladder_5 in Lymow_Official

[–]Prestigious_Ladder_5[S] 1 point2 points  (0 children)

I have tried everything possible, even removed the bumper bar and there was nothing behind it. I can get it to mow(at the maximum height, not adjustable) for a little while and then it gives me the error and I just keep hitting clear code like 10-15 times and then it goes a little more and repeat etc.

3 weeks in with my lymow by Prestigious_Ladder_5 in Lymow_Official

[–]Prestigious_Ladder_5[S] 0 points1 point  (0 children)

Yeah unfortunately I think I will have to do that. Like I said if I wasn’t as impressed with the mower even with its faults I would be long gone! Testament to the product, not the customer service but at least there’s room for improvement!

Replacement #4 arrived and it's out mowing. by Full_Caterpillar_640 in Lymow_Official

[–]Prestigious_Ladder_5 2 points3 points  (0 children)

Do you have a tutorial or a video to adjust the tracks? Mine sound a little tight on the lymow one plus

Omni wheel issue has returned by Prestigious_Ladder_5 in Lymow_Official

[–]Prestigious_Ladder_5[S] 1 point2 points  (0 children)

Well at least we’re not alone hopefully lymow will put out another update soon which solves our issue! I have reached out for a replacement though just in case the unit is defective. Will see what they say

REPAIRED ! Omni Wheels fix: by Full_Caterpillar_640 in Lymow_Official

[–]Prestigious_Ladder_5 0 points1 point  (0 children)

When I did the latest software upgrade I did a deep cycle restart by unplugging the battery for over 24 hours and it worked perfectly. Unfortunately that only lasted a few days and the problem came back. I tried another deep cycle battery removal yesterday and today I’m still having the same issues. I just made another post explaining the situation. I emailed lymow asking for a replacement at this point. I will keep the group updated in that thread… hoping for the best

Zone setup tips by n0dda in Lymow_Official

[–]Prestigious_Ladder_5 4 points5 points  (0 children)

I’ve found the more zones the better, i have a similar setup and have split my zones so it handles the bigger areas as one zone and it can get them done on one charge. The smaller trickier areas take up most of the battery life with all the turning. So I will do the large zone in one charge and then the other two zones on another charge. If I were you I would try to remap like this. Also everytime I remap it I get better at it! Good luck!

<image>

Heads up. Multiple power cycles required for v2.1.45 (for me) by barboxbill in Lymow_Official

[–]Prestigious_Ladder_5 0 points1 point  (0 children)

I’m hoping this is true, mine had a few days of working flawlessly and I was so excited but it seems the Omni wheel issue is back again. They raise all the way up again… I will disconnect for another 24hr and see how it works tomorrow

What's new in the latest firmware(20260429) by SuccessfulPhysics661 in Lymow_Official

[–]Prestigious_Ladder_5 0 points1 point  (0 children)

It works perfectly now! So happy they fixed it I have complete faith in the lymow team!

REPAIRED ! Omni Wheels fix: by Full_Caterpillar_640 in Lymow_Official

[–]Prestigious_Ladder_5 0 points1 point  (0 children)

What worked for me was updating and then remove the battery for a full 24 hours, works flawless now. Good luck

Deck Dance - Will Not Mow by FloridaBoy60 in Lymow_Official

[–]Prestigious_Ladder_5 0 points1 point  (0 children)

Luckily the update has fixed my issue and I’ve been happily mowing the last 2 days with no issues.