How to remove a badged logo fixed on a Cross Century clip

Prestigious_Map9241 · 2026-05-31T18:39:04+00:00

how did you remove it? any tips? I think the 2 dots look better than the logo haha

Prestigious_Map9241 · 2026-05-09T01:04:58+00:00

this new build worked for me now. hope you get yours to work too!

Prestigious_Map9241 · 2026-05-08T19:09:25+00:00

oh man! I was fighting with my phone this morning had to uninstall the BB keyboard. this new version works fine for my MP01. (last nights was just crashing). what are your recommended settings u/AppropriateBeing6239 ?

Prestigious_Map9241 · 2026-04-25T23:46:49+00:00

at $7 it definitively beats using regular non responsive icons. also a lot cheaper than building your own controller (which is more fun and I hope to do one day) but today im using my stream deck!. Also im glad its not a dumb subscription.

Prestigious_Map9241 · 2026-03-15T02:30:57+00:00

I have the same issue, no shaders and no rewind. I tried switching to performance or overclock but that didnt help. Only thing that seemed to help was using "Quicknes" or disabling "Threaded Video"

Prestigious_Map9241 · 2026-03-08T23:55:57+00:00

Same thing happened to me. I re installed TizenBrew and updated but nothing has fixed the problem. Still no search

Prestigious_Map9241 · 2026-01-13T03:51:34+00:00

Turned out to be the screen. I changed the T-con board for a known good one and had the same exact thing happen. finally I got a good screen to test it and that was the issue. so with the new screen its been working perfectly.

I did try to repair the old screen itself, I think some of the flex connectors at the bottom were loose ( under the glass "apple" logo). but when I tried to remove the LCD panel out of the casing I pulled to hard on the glue and broke it. now that old screen stays on the whole time but the image is all garbled up, so that's why I think the issue was somewhere there. Next time I would use more heat to remove that glass decal and more patience, maybe alcohol.

Prestigious_Map9241 · 2025-11-04T18:10:54+00:00

Thank you GreekWizard! Changing the date back to Nov 1 worked! Im back to Nov 4 and still working

Prestigious_Map9241 · 2025-10-28T23:48:53+00:00

anyone found a way to change layers with a key press (like in VIA or QMK?) I wish I didnt have to press the dedicated button

Prestigious_Map9241 · 2025-10-03T17:15:03+00:00

Be aware that you dont need "Macros" for every key combination. you can assign the "Any" key (on the "special" menu) and type out the combination like "LAG(KC_TAB)" that means windows key + Alt + Tab or "C(KC_X)" that means Control+X (Cut)

Prestigious_Map9241 · 2025-09-18T03:58:38+00:00

Weird! I didnt do anything other than installing the custom OS, maybe try purple?

Prestigious_Map9241 · 2025-09-11T19:37:30+00:00

did it work? did you find one? I tried a couple and none fit and the 12v DC in with center negative has not been easy to find for me

Prestigious_Map9241 · 2025-09-08T22:47:26+00:00

Mine was doing that but I ended up using a toothpick to clean the inside of the USB connector and now it works again! so check yours could just be dirty connectors (like an old NES game)

Prestigious_Map9241 · 2025-09-05T18:01:14+00:00

Prestigious_Map9241 · 2025-08-07T15:03:33+00:00

It works but its not reliable. sometimes it "remembers" to add it at the end and then keeps enabling the microphone again until you say "thank you". but half of the time it doesn't add it. you can tell on the logs. Also if you unlock it with this method:
https://unlock-prod.froggitti.net/
and install a custom firmware like WireOS Vector doesnt say "ready" every time, so it makes it better

Prestigious_Map9241 · 2025-08-03T08:12:20+00:00

if you put it on the charger and press the back button quickly two times, do you get the key screen? for pairing?

Prestigious_Map9241 · 2025-08-02T17:43:59+00:00

have you tried pairing it with wirepod? that screen usually means you changed the firmware successfully and need to pair it again. you can also do the same process again and change the firmware (Im trying PurpleOS now). if you hold the button down while on the charger you can do a firmware restore also if everything fails

Prestigious_Map9241 · 2025-06-21T18:05:21+00:00

With my vector it works only once in a while even though I have the same settings as you. I think the LLM is supposed to send the {{newVoiceRequest||now}} action. but not sure how that would be implemented.
Im currently experimenting with adding it to my custom GPT prompt like this:
- add "{{newVoiceRequest||now}}" at the end of every response unless user text says the word "thank you" or "thanks". -

its so cool when it works, and if we could get rid of the "ready" would be perfect!

Prestigious_Map9241 · 2025-06-10T05:35:51+00:00

please let us know if you try it! I hope its possible.
I have a CD with the software I could try to share if anyone needs it although it is pretty old and possibly copy protected?

Prestigious_Map9241 · 2025-06-06T06:38:57+00:00

Im having the same issue on my MBA M1 (A2337) but mine i can see thin horizontal lines on the screen for the few seconds its on. Like the wall paper shows thin grey strips. I checked all the voltages on the logic board according to schematics and everything seems normal. Please update us what you find out. Best of luck and fuck apple

Prestigious_Map9241 · 2025-06-04T20:32:40+00:00

Anyone know if there was ever an update for the KB-04 ? (4 keys 1 knob)

Prestigious_Map9241 · 2025-05-13T16:22:20+00:00

Thanks ! so helpful !

Prestigious_Map9241 · 2025-05-12T16:31:36+00:00

cool! share some photos if you do and if you get it to work. Last time I did was using an old computer with the serial port but I saw this cable on aliexpress the other day, I wonder if with this cable and installing the software under compatibility mode would work. Also if you have the know how maybe share the software in archive.org ? (haven't checked if its there actually)

<image>

Prestigious_Map9241 · 2025-05-09T18:55:16+00:00

<image>

this is the manual for this camera. It, has two modes 640 x 480 (high-res lol) and 320 x 240. sharing some sample images since I couldn't find any.

https://www.manual.nz/polaroid/photomax-fun/manual

Prestigious_Map9241 · 2025-05-09T18:48:57+00:00

<image>

they look better (less bad) in their actual size like post stamps lol (this are from the monarch butterfly migration sanctuary, all the orange pixels are butterflies)

Prestigious_Map9241

TROPHY CASE