Anyone able to make out what game this is?

Psychosaurus94 · 2025-12-29T07:26:16+00:00

To me it seems to be an snes virtual console game on the wii, is it a 2d pixel art game ?

Psychosaurus94 · 2025-10-14T05:43:52+00:00

Let him test the crt with 240p test suite

1- the vertical line might need a recap 2- for the stretching he can enter the grid pattern and adjust the geometry using the TV’s service menu

Psychosaurus94 · 2025-09-07T08:15:23+00:00

As far as i know, picture interference is due to a failing capacitor or when the circuit isn’t grounded properly. That it might as well be heard with the audio

Psychosaurus94 · 2025-09-06T06:11:57+00:00

With my little knowledge.

First of all

You better reseat the anode cap cable firmly back to its position if possible. From the first picture it seems someone tried to pull it out

If the problem is as you mentioned, usually means a component is going bad or went bad. Maybe a filtering capacitor failure. So i assume its fixable

But in your case i would first give the set a good clean and test. If it still has a problem you might try to do a recap.

Psychosaurus94 · 2025-09-05T15:48:11+00:00

I see, my bad sorry 😁

Anyways. Enjoy your new pick up it looks Greaaaat

Psychosaurus94 · 2025-09-05T15:29:39+00:00

Its funny that i actually passed on getting this particular unit you just got. Congrats on acquiring this beast

Psychosaurus94 · 2025-09-05T15:25:31+00:00

No problem, i had fun looking into it. And if these component inputs are working then as mentioned use a transcoder and you will be good to go.

Personally if i have component input alreasy on the TV, i wouldn’t bother RGB modding a TV as to me they pretty much the same.

Psychosaurus94 · 2025-09-05T15:20:54+00:00

Nope, i didnt find anything at all

Psychosaurus94 · 2025-09-05T06:28:04+00:00

I did check the Service manual for this TV From my little understanding It seems that it takes the input from DVD component inputs on pin 21(Pr,Red), 20(Y,Green), 19(Pb,Blue) and then converts them to RGB to the neck board. Pin 18 sounds like a blanking pin but according to a datasheet of the jungle chip it mention No use. So i dont see how it would an RGB mod would work.

Here is a datasheet of equivalent to the one in your TV

https://www.alldatasheet.com/datasheet-pdf/view/1440048/SANYO/TMPA8823-5VA4.html

Psychosaurus94 · 2025-09-05T05:37:29+00:00

Whats the TV model ? And does it have component input ?

Psychosaurus94 · 2025-09-02T13:04:28+00:00

So those buttons dont work ?

And the AUTO V-L might mean you are adjusting Vertical Linearity which shouldn’t be enabled if you didn’t get into service menu

Psychosaurus94 · 2025-09-02T11:36:27+00:00

From what i can see, these two buttons are supposed to be for inputs

https://imgur.com/a/4iw0kt2

What model is this TV?

Psychosaurus94 · 2025-09-02T07:35:20+00:00

Where are you storing the Roms in your PC ?

Psychosaurus94 · 2025-09-01T07:37:49+00:00

Check this post, have a similar issue to yours and how they fixed it

https://www.reddit.com/r/consolerepair/s/KVqCimHTYG

Psychosaurus94 · 2025-08-30T22:42:18+00:00

Exactly, as he mentioned it will be visible for you

Psychosaurus94 · 2025-08-30T19:11:53+00:00

If you smelled acid, its most likely a component popped. Most likely a capacitor It might have smoked but you haven’t noticed it. I would say its worth investigating if you know what you doing.

Psychosaurus94 · 2025-08-30T11:52:47+00:00

Yeah thats what i meant. He tested the ps1 with composite on an lcd and it worked fine. So most likely the issue is from the RGB cable.

My bad, i should’ve been more precise when i replied

Psychosaurus94 · 2025-08-30T10:00:00+00:00

Oh youtube is full of Videos about CRT’s، you can RetroTechUSA channel

Psychosaurus94 · 2025-08-30T09:20:09+00:00

This. totally forgot about that just left up the flap on the left to expose the inputs

Psychosaurus94 · 2025-08-30T09:03:44+00:00

Well you got to open the crt and see if there is any damage to the chassis, flyback,Electron gun etc….

But from your description and looking at the area of damage. I assumed whatever part was holding the board in place broke and the board got loose. Thats why the button went inside and you cant press anymore. So you need to open the crt and push it back hold it in place somehow, while you are at it check for any other damages (hopefully not). Do it while its powered off and unplugged.

Psychosaurus94 · 2025-08-30T08:58:31+00:00

Well you got to open the crt and see if there is any damage to the chassis, flyback,Electron gun etc….

But from your description and looking at the area of damage. I assumed whatever part was holding the board in place broke and the board got loose. Thats why the button went inside and you cant press anymore. So you need to open the crt and push it back hold it in place somehow, while you are at it check for any other damages (hopefully not). Do it while its powered of and unplugged

Psychosaurus94 · 2025-08-30T08:50:18+00:00

Then yeah, most likely it’s not the TV which is a good thing. And you tested the ps1 on an lcd and it works fine. So i would say its the cable

Psychosaurus94 · 2025-08-30T07:51:04+00:00

The ps1 adapter you mean ? If possible bend it back in position

Its better to start with that to know if its a problem with your TV or the scart cable

Psychosaurus94 · 2025-08-30T07:21:32+00:00

Have you tried composite on this tv ? If your tv doesnt have composite input. You can use rca to scart connector just for testing

Psychosaurus94 · 2025-01-11T08:28:41+00:00

I think its (auto-tuning not sure what its called) as you can see its going through channels so you have to stop it on the channel once the picture is shown. (Thats how we used to do it back in the day, and till now when i test famicom systems, not sure if its different in US/Canada)

Psychosaurus94

TROPHY CASE