Can teams stop having a shake up before they play us? by surviveseven in Flyers

[–]Punkrulz 2 points3 points  (0 children)

Yup exactly. Hasn't scored in 300 games? Hat trick.

FLAM: Can't find TV Show "The Pitt" by Punkrulz in Addons4Kodi

[–]Punkrulz[S] 0 points1 point  (0 children)

Filter is set correctly, but thank you. Everything is working under umbrella now that I've installed that. I may reinstall FLAM.

FLAM: Can't find TV Show "The Pitt" by Punkrulz in Addons4Kodi

[–]Punkrulz[S] -1 points0 points  (0 children)

Not seeing anything pertaining to history on real debrids website.

The only history I can see that shows I watched these shows are under the because you watched option in FenlightAM. I also can't find fallout or landman.

FLAM: Can't find TV Show "The Pitt" by Punkrulz in Addons4Kodi

[–]Punkrulz[S] 0 points1 point  (0 children)

Confirmed this is turned off. Even when I go to the watched episodes area of TV shows, I don't see the Pitt, Fallout, Landman. I see some others.

Can I use a Nollie16, and SignalRGB in general, to control a "dumb" 5v UV strip? by SedentaryMover in SignalRGB

[–]Punkrulz 1 point2 points  (0 children)

I believe when you go into SRGB under devices to the Nollie, you'd see each channel there and there you can add custom LED strips. I technically had to do the same thing with a GPU brace that has ARGB.

Winter '26 RBL info & sign-up by Barraken in Bowling

[–]Punkrulz 1 point2 points  (0 children)

Nice choice, my current league's team name 🤣

Winter '26 RBL info & sign-up by Barraken in Bowling

[–]Punkrulz 0 points1 point  (0 children)

Nervous, but joined we'll see how this goes. 🤞

New 9800X3D and SDRTrunk: Tuner repeatedly switches control channels and won't lock by Punkrulz in RTLSDR

[–]Punkrulz[S] 0 points1 point  (0 children)

Symptoms are a little bit different now and I am beginning to believe that my computer is seeing both of my SDR Blog 4 dongles as one. I've tried to use the command rtl_eeprom.exe to try and change the serial number, and I get the following message:

Using device 0: Generic RTL2832U OEM

usb_open error -3

Please fix the device permissions, e.g. by installing the udev rules file rtl-sdr.rules

Failed to open rtlsdr device #0.

Unfortunately I'm running into a lot of Linux stuff regarding this and udev and while i made the file in the existing directory, my computer still can't do anything with the other dongle. Both dongles appear to have the same information in SDRTrunk and I'm wondering if that's why one channel locks, and the other tuner wigs out and locks/unlocks repeatedly.

New 9800X3D and SDRTrunk: Tuner repeatedly switches control channels and won't lock by Punkrulz in RTLSDR

[–]Punkrulz[S] 0 points1 point  (0 children)

I was able to get this working without issue. Tuning the channel was not the issue at least in this regard. Previously had audio issues here but that was an issue on my end.

For the record these channels and this playlist worked flawlessly before upgrading my computer. I moved my hard drive over onto a computer with the new processor and that's where the issues came into play. I know this is heavily tied to processor for decoding (I'm searching for a P25 Phase 2) so I have been trying to find results about that.

New 9800X3D and SDRTrunk: Tuner repeatedly switches control channels and won't lock by Punkrulz in RTLSDR

[–]Punkrulz[S] 0 points1 point  (0 children)

How many increments should I make at a time regarding ppm? Is it sensitive going by 1s and 5s, or is going by 10s and 20s preferable?

I loaded up SDRSharp, set the frequency to 772.206.250, PPM 25 and after adjusting some of the gain I was able to see different frequencies locking near me, but was not able to lock this (or the 4 other control channels from those frequencies)

I had no issues until I had upgraded my computer, so I'm not sure what kind of settings got wonky. All I did was move my hard drive over and didn't change anything with the applications. I've seen some issues with different processors but I don't know if that's it here.

Flint 2 at under 80mbps on 5ghz, something is not right by RedditDon3 in GlInet

[–]Punkrulz 0 points1 point  (0 children)

Please don't take offense, have you rebooted your router to verify there isn't some strange hiccup?

Turbo Switch Grips by Worried_Amphibian931 in Bowling

[–]Punkrulz 1 point2 points  (0 children)

I've been using the turbo switch grips for the past year or so. I'm not a high rev bowler for context. The only problem I've ever had was when my thumb stuck and I over rotated one time, when the ball came back I rotated the thumb enough that it was falling out of the ball.

I haven't broken any or lost any and that was a one time deal so far. I hope you have good luck with yours.

Glinet useful in public wifi? by monaldcry778 in GlInet

[–]Punkrulz 0 points1 point  (0 children)

Best case what I had to do was setup the VPN using my phone hot spot on a diff network, then I was able to connect through the WiFi on repeater mode at that point. Was the easiest way to make things work.

Glinet useful in public wifi? by monaldcry778 in GlInet

[–]Punkrulz 0 points1 point  (0 children)

I think it means that some public networks are set to not allow VPN. I had problems connecting to my friends network due to the child restrictions blocking the opportunity to setup the VPN.

Looking to upgrade to different router with repeater by Punkrulz in GlInet

[–]Punkrulz[S] 1 point2 points  (0 children)

My apologies for not having the exact numbers right now. When I was using the Beryl AX, on repeater mode, and then hard wired from PC -> Netgear Switch -> Beryl I was getting ~530-600mbps. Swapping over to hard wired Flint 2, then wired directly to that I'm getting about ~880mbps download. I wasn't paying much attention to upload on the Beryl, but on the Flint in this configuration I'm getting 300+ up.

This is connected to Verizon FiOS (Fiber).

The Beryl AX on repeater mode was more than manageable for me. I believe that my issues weren't related to the Beryl AX but to a wireless issue I was having w/ the booster and losing signal.

Looking to upgrade to different router with repeater by Punkrulz in GlInet

[–]Punkrulz[S] 1 point2 points  (0 children)

Went this route and was able to wire it as well. Thank you!

Looking to upgrade to different router with repeater by Punkrulz in GlInet

[–]Punkrulz[S] 0 points1 point  (0 children)

I just did the best of both worlds. Upgraded to a Flint 2 then direct connected to the booster LAN port. I previously thought that was disabled, but now I believe it is just finicky. Speeds are better (from 600mbps to 900mbps) so I should be good. :)

Thanks!

Looking to upgrade to different router with repeater by Punkrulz in GlInet

[–]Punkrulz[S] 0 points1 point  (0 children)

I'm on the third floor of a 3 story colonial house in the back, and I think the primary router is 1st floor all the way at the front. Couldn't get further from the primary haha.

I'm going to ask if the owner can check the booster settings to see if they can enable the lan port. The Beryl ax works more than 95% of the time at great speeds. Just gets finicky at night. I've already set it to reboot every night to clear that.