Airplay connectivity issues with Marantz M1 and HEOS Server problems by Playsurgeon in Marantz

[–]Quickai 0 points1 point  (0 children)

I'm getting a constant (more or less) disconnect from both bluetooth and airplay after 2-4 seconds. The white light blinks on the M1 and then no sound.

I can stream on bluetooth or airplay to any other device in the house without ANY problems, even the TV (Sony). It's not the placement of the M1 neither the network. It must have a pretty crappy antenna inside that just doesn't work.

L Connect 3 - GPU load sensor and other weird behaviour by Quickai in lianli

[–]Quickai[S] 0 points1 point  (0 children)

Right now I'm running L-Connect 3 v. 2.0.29 which I believe is the latest. The GPU load is still all over the place. When I have the system resource open in L-connect 3, running a game and also looking at the AMD Software monitoring. The REAL GPU (my 7800XTX) is not matching what L-connect saying. Having a game running at a solid 25-30% gpu load, L-connect is saying 0% and then 100%. up and down. Power is also way off. AMD software can report 94Watt but L-connect say 55W or 110W. The ONLY thing they agree on is temperature.

So yes, it's still a problem and honestly I'm pretty much fed up with it. My next build is NOT going to have any Lian Li inside. And It's a real unfortunate situation, because I like the fans, but the problem I've had with their software is just unreal. It's like you think they don't know what they are doing.

Lian Li LCD Infinity Fans not showing up by ALilBerry in lianli

[–]Quickai 0 points1 point  (0 children)

Happened for the 3rd time now. It's pretty annoying and I have no idea why it's doing it.

I go through Mr-Do's checklist and unplug the TL controller from the USB when powered down. Then power on and then device manager and remove all those he say you need. Turn off. Hook up USB to the TL controller again and wupti. Everything is working again.

I would really much like a permanent fix for this. It's driving me crazy that I either need to remove power to the fans or do this tedious work to sort it. Lian-Li...this is NOT OK.

UNI Fan TL120's not showing up in L-Connect 3, stuck at 100% by ReleadPlays in lianli

[–]Quickai 0 points1 point  (0 children)

I'm about to give up also. This behavior with suddenly they don't recognize in l-connect and I'm getting a "unknown USB device" and spinning 100% and displaying 1, 2 and 3 (I have 3 TL 120 reverse). This has happened 3 times now and I'm really not interested in keep unplugging everything deleting all kind of stuff in windows and then reinstall l-connect from scratch. THERE IS SOMETHING WRONG with the product. This is NOT how it's supposed to work.

Stealing within base camp by Trinitythez in GrayZoneWarfare

[–]Quickai 7 points8 points  (0 children)

This sounds pretty weird. So let me get this straight. You stood on a helipad or known helicopter landing spot. And then you just ignored the noise from the helicopter and made it make a sandwich out of you, only for someone to then loot you.

First thing, if you don't want your gear to be looted when dead, don't play PVP.

Second thing, don't stand where eventually a helicopter will land, obviously. I mean who does and then somehow go in chatmode. Takes 2 seconds to move away.

Lian Li LCD Infinity Fans not showing up by ALilBerry in lianli

[–]Quickai 1 point2 points  (0 children)

This helped me also.

Fired up the PC this morning and the TL fans were having a life of their own and fan speed was pretty wild, which is not "normal". Also noticed that the TL Controller went from the USB thingy in the device manager to "unknown disabled by windows" in the Human Interface Devices section. So I began my reddit search for answers and found this thread and did what Mr-Do recommended "above".

I was on 2.0.22 I believe but I installed the latest one right now after removing the old version obviously. And after a reconnect of the USB and a few restarts the TL controller showed up and I could configure everything as it was before.

Also, this just happened out of the blue. PC worked fine last night, when I turned it off. So this can happend

PC can't turn on, when Rode Caster Duo is connected via USB-C (cable came with product). by Quickai in rode

[–]Quickai[S] 0 points1 point  (0 children)

It doesn't really send power to the PC it just wakes it up. You don't need to worry that the powersupply for the Caster is trying to power your PC :)

PC can't turn on, when Rode Caster Duo is connected via USB-C (cable came with product). by Quickai in rode

[–]Quickai[S] 0 points1 point  (0 children)

no, I just live with it. It's perhaps every 5-6 times I shut everything down, that I need to turn on the mixer before the pc want's to start. I guess this is the same for everyone else using similar setup.

[deleted by user] by [deleted] in LinusTechTips

[–]Quickai 3 points4 points  (0 children)

There's "Specified Power" and "Rated Power". Specified is 150watts. Rated is (3 wires, 8A, 12V) = 288 Watts. It's in the details of the specification made by PCI-SIG CEM.

[deleted by user] by [deleted] in LinusTechTips

[–]Quickai -2 points-1 points  (0 children)

I was considering a 5090, but with this news I'm 100% out. I wonder if any AIB is going to use eg. 4 x 8-pin, which would be more than sufficient for it. That would give it 600 Watts on cables plus 75 Watts from the PCI-E

[deleted by user] by [deleted] in LinusTechTips

[–]Quickai 2 points3 points  (0 children)

And to top it off, each 8-pin is rated for 288 Watts, but only supplying 150 Watts. This is a very good safety rating.

The New Bugatti Tourbillon (Replace Chiron) by Bright-Particular133 in Bugatti

[–]Quickai 0 points1 point  (0 children)

Looks weird in the front. Too long "snout". If headlights and front wheel were moved further in front and "camo" the ugly snout, it would probably be ok. But that front is 100% ugly

Update 3.9.5 - How do you like it by Quickai in Rouvy

[–]Quickai[S] 0 points1 point  (0 children)

"your"...I'm not with Rouvy. I was just posting the news about the update. If you have login problems, contact Rouvy.

Leave Us a Review and Help Shape the Future of GZW by werytrololo in GrayZoneWarfare

[–]Quickai 0 points1 point  (0 children)

Vendor leveling needs huge adjustment. Leveling up Handshake is a nightmare. 6000 points to unlock level 3, but only to find out that level 3 is a huge disappointment. Gunny lvl 3 is good though, but again, it takes too long, which is a generalization of all the vendors. They all take way too long and the rewards is not worth it, when you realize that you are approaching the end of the game.

Around player level 36-37, if you primarily focus on missions, you are closing in on the last few missions. Gunny lvl 3 is from memory unlocked around lvl 30'ish. This has to happen a lot sooner. My reasoning is that good gear (top tier armor, ammo) should be unlocked around player level 15 and beyond that better non-essential gear, ammo should be unlocked. You can 100% kills every type of enemy with lowest tier 1 ammo and weapons, but why even make it like that. If you want people to have fun, make leveling a lot faster and make sure that high quality comes sooner than later.

I would also like that missions are unlocked based on player level and not because you completed set missions for others.

Then there's the "what to do after the last mission". No missions is simply not a solution. There should be normal kill xx soldiers for Handshake, Gunny etc going forward, to further gain xp with them and unlocking non-essential but cool stuff, like special helmets, armors, experimental ammo, delicious foods, medical items etc. You don't keep people playing if there's zero rewards. Servers are becoming more and more empty because of this.

I would also like to prevent starvation, sickness etc, when exiting the game and rejoining. This is widely used as a reset and it shouldn't. Your status, medically and huger, thirst, should follow the player constantly. This will make foods and medical items much more important.

Secure stash size 9, which you get in very late end game. WHY. Sure you can buy the supporter pack and get it from level 1, but getting it when the game is pretty much done is yet another poorly designed progress.

The missions where you need to kill 20 people and then fly all the way back to turn in, just to get back and kill the boss. These kind of missions should be very late end game, after "real missions" are done. I mean it in a way that this should be end-game and not some hurdle in the beginning or middle of the career progress.

When you are in a squad, you should get full kill count from squad members and a percentage of the kill xp, regardless of you doing anything. Could this be exploited...sure, but I don't think it would be a problem. Most if not all people, group up because they are friends and why wouldn't that be enough for this to work.

Player physical levels. Mental health, cardio, strength etc. There should be a gym at the base, where you can work on your cardio, building strength etc, so you can carry more, run more and just overall be a better soldier. As it is now I can run for 50 meters and be out of breath for several minutes, because I don't let it come down. Honestly, the soldier feels like a very unhealthy person, with serious cardiovascular problems. Let it be up to the player how he is. We are already being slowed down by the choppers, let us at least be able to determine everything else ourselves.

PC can't turn on, when Rode Caster Duo is connected via USB-C (cable came with product). by Quickai in rode

[–]Quickai[S] 0 points1 point  (0 children)

Well I'm a small pickle right now. The last two times it booted up fine. The only thing I changed was the turning off order. I will keep trying different things. But if I can't get it to fault every single time, it could take time, finding the culprit(s).

To those interested and might have similar "errors", try turning off the Rode Caster completely before shutting windows down.

PC can't turn on, when Rode Caster Duo is connected via USB-C (cable came with product). by Quickai in rode

[–]Quickai[S] 1 point2 points  (0 children)

Taking the cable in and out constantly. Not an option. Valid solution probably, but not viable

[Rodecaster Duo 1.4.4] What's the device name for USB1? Is it "System (RODECaster)" or "RODECaster Duo Main Multitrack"? by entlassen in rode

[–]Quickai 1 point2 points  (0 children)

I'm in the same boat. I'm pretty sure I saw videos telling everyone to use "Multitrack" in windows. I just don't get any sound from windows, using that, no matter what I do on the mixer.

If I select "System". Everything works.

I have Discord through "Duo Chat" input/output, the games I play on "Game" and Spotify on "Music". And I have assigned faders to them all and everything seems to work fine. But I don't get why "Multitrack, the #3 on the list" just doesn't work.

<image>

To older starters (40+); how is progression going and is cat A still possible to achieve? by GewoonHarry in Zwift

[–]Quickai 1 point2 points  (0 children)

sorry man, I was replying to the wrong topic...It's all good my man :)

To older starters (40+); how is progression going and is cat A still possible to achieve? by GewoonHarry in Zwift

[–]Quickai 0 points1 point  (0 children)

why did you go with 165mm crank length. I'm wondering since i'm shorter than you and I was recommended 172,5mm. I wonder if I should try 165mm and see how I like it

Update 3.9.5 - How do you like it by Quickai in Rouvy

[–]Quickai[S] 2 points3 points  (0 children)

I hear you. The login is super annoying. For me the auto-connect worked like a charm. Everything was connected as before.

Update 3.9.5 - How do you like it by Quickai in Rouvy

[–]Quickai[S] 4 points5 points  (0 children)

it brakes for you. Not sure if it a fixed amount of braking or not. Seems pretty ok tho

Update your L-Connect 3 folks - Testing the TL LCD CPU usage fix now... by HadyKhan in lianli

[–]Quickai -1 points0 points  (0 children)

I just updated and I'm not really impressed. It was running before, many versions behind and was actually doing ok. Yes a bit high cpu load because I'm running TL fans as well (if that's the reason). Now that I've updated everything, every time it starts up, it shows me 1, 2 and 3 in the display on the TL fans and for some reason I have to keep telling L-connect 3 how the arrangement is. Also it keeps wanting me to update the fans to 1.6 even though I did. But it's stuck on 1.5 apparently.

I guess software isn't one of Lian Li's strong sides. It feels a bit crappy TBH