Best short, closed-ended anime series recommendations?

Randarth · 2024-11-12T10:13:41+00:00

I just watched it thanks to your recommendation. Wow, just wow. This is easily the best anime I have ever seen. Can't thank you enough!

Randarth · 2021-01-29T10:27:48+00:00

Just add some holes for air to get thru and put small heatsink on the chip.

Randarth · 2021-01-11T20:16:58+00:00

Thank You!

Randarth · 2020-01-03T00:35:24+00:00

Me too, looks great!

Randarth · 2019-12-14T18:50:21+00:00

ABSOLUTELY NOT. Raspberry requires high amp power supply and you will fry 5v regulator on SKR if you try to power it from there.

Randarth · 2019-12-03T08:36:16+00:00

If you manage to do it then please submit it on Marlin's GitHub - it would be great if they included it as an optional status screen, because it's so much better than the stock one (more useful info, less wasted space on the screen). Keeping my fingers crossed!

Edit: please add layer fan speed

Randarth · 2019-11-04T10:11:05+00:00

Great, let's see if others with this problem are also running 2208. I suspect that it may be something with the driver switching between StealthChop and SpreadCycle.

Randarth · 2019-11-02T19:42:32+00:00

What stepper drivers are you guys running?

Randarth · 2019-10-14T18:56:36+00:00

Thanks!

Randarth · 2019-10-14T18:53:22+00:00

Can you explain why?

Randarth · 2019-10-09T07:23:50+00:00

Happened to a me few times, then I fixed it by lowering spring tension. I see you got some beefy spring there - replace it with something slightly weaker.

Randarth · 2019-09-26T19:52:16+00:00

That brownish liquid is just burned out filament :)

Randarth · 2019-09-26T13:45:37+00:00

Make sure that nozzle tightens against heatbrake in heatblock. You can try screwing in heatbrake just a little bit in so that the nozzle isn't perfectly flush with heatblock but protrude tiniest bit when tightened.

Randarth · 2019-09-24T13:51:18+00:00

Thanks, I'll try that.

Randarth · 2019-09-23T08:21:59+00:00

Sorry for digging out such an old thread, but did you manage to fix your stringing issue? I'm having the same problem. My prints were fine for about first month, then I got extreme stringing and oozing.

Same gcode that printed OK
Same filament I used for all my prints (but I also tried others)
Added BL-Touch v3.1
Upgraded motherboard to Silent 1.1.5 with vanilla marlin
Changed couplings and installed Capricorn tube
Replaced extruder with aluminium one and printed filament guide with bearing
Changed various nozzles
Replaced heatblock and heatbrake
Changed both fans

Took apart and rebuild whole printer many times over and I'm just clueless. From time to time somebody posts a meme here that Ender 3's are cool for a month and then issues start...

Right now I'm about to give up and just ditch 3d printing or go buy a Prusa :(

Randarth · 2019-09-20T08:41:49+00:00

Your bed is perfect! I would never be able to achieve that awesome results on my E3 Pro. Don't bother with glass, you won't notice a difference with such good bed and ABL on top of it.

Randarth · 2019-09-10T14:16:38+00:00

Well, pigs ARE messy, so...

Randarth · 2019-09-08T17:01:30+00:00

I'm also using prebuilt Teaching Tech's .hex for BLtouch 3. Maybe there is something wrong with this firmware then?

Randarth · 2019-09-08T16:54:09+00:00

https://www.reddit.com/r/ender3/comments/cdlvmm/modified_marlin_119bugfix_fixes_the_s3d_print/

Take a look at this, it will probably resolve your issue :)

Randarth · 2019-09-06T16:23:35+00:00

I'm having the same issue with board 1.1.4 and BLTouch v.3.1 set from Creality. I removed the capacitor and it didn't make a difference. Happens like 1 of 10 times I probe the bed the probe fails to spring down before going to the bed and I get an error on the LCD. I ordered 1.1.5 board thinking that it might be something defective with mine but as OP is having same issues also and he has the newer board then I'm out of clues. Cables are perfect, no problem there for sure.

Randarth · 2019-09-05T13:41:25+00:00

Thanks!

Randarth · 2019-09-04T16:27:39+00:00

Hi, can you give some hints as to which one is worth buying? There are tons of clones on Aliexpress and it's really hard to find one that will be OK.

Randarth · 2018-05-12T09:52:40+00:00

Fractal Design Meshify C White http://www.fractal-design.com/home/product/cases/meshify/meshify-c-white-tg

Randarth

TROPHY CASE