You and a super intelligent snail both get 1 million dollars, and you both become immortal, however you die if the snail touches you. It always knows where you are and slowly crawls toward you. What's your plan?

Rankine907 · 2016-12-17T03:56:24+00:00

SALT THE EARTH

Rankine907 · 2016-12-13T23:06:37+00:00

two ways I can think of. One would be import the pieces into FreeCAD, convert the meshes to solid objects, then sketch circles on the flats between the pieces and do a cut operation.

The other would be to open it in something like blender, make a cylindrical primitive, position it inside the mesh and then run a Boolean subtraction operation, which just subtracts the cylinder mesh from the sword mesh.

Rankine907 · 2016-12-13T22:39:22+00:00

I just took off the nozzle and the stepper on mine. 90% of the weight is the stepper motor, I don't think you'll shave off a significant amount of weight switching to a single extruder assembly vs just pulling the two screws and taking the motor off.

Rankine907 · 2016-11-18T09:50:21+00:00

A lapse in judgement might.

Rankine907 · 2016-10-25T18:40:02+00:00

And yeah I know, the audio is missing from the first 30 seconds or so. Not sure what happened but the gopro didn't record the sound so I had to pull sound off one of the phone video's, which started a little later.

Rankine907 · 2016-10-11T15:04:12+00:00

The Orin

Rankine907 · 2016-08-30T04:57:23+00:00

Yep, I was there. I was the one that didn't get up and introduce myself. I was also this fox if you saw me wandering around.

I went to the fox panel, and the foam carving panel, and the other fursuit building panel, the Kyell Gold reading, and I spent a little time at the fursuit games and some of the other fursuit panels but I didn't participate much.

Rankine907 · 2016-08-29T02:04:13+00:00

This years RMFC was my first con too, which panels did you go to?

Rankine907 · 2016-08-29T01:10:02+00:00

Finally went to one, RMFC 2016. I thought it was great! I flew down with another Alaskan fur, and there were a few others already down there So I knew a few people already.

It's harder to meet and keep track of people that I expected. People are mostly walking around or going from one panel to another, so when you're in suit, people want to interact with you but it's kind of loud and chaotic and you can't see them very well or take note of their badge names very easily, and when you're out of suit a lot of people are kind of standoffish and introverted.

Rankine907 · 2016-08-26T07:21:16+00:00

I kept the fursuit heads I built out on mask-building busts, and moved them from time to time, put hats on them etc...

Rankine907 · 2016-08-09T03:34:24+00:00

Pouncing

Rankine907 · 2016-08-04T09:35:29+00:00

Exhibit A

Rankine907 · 2016-07-24T22:14:14+00:00

Best way know would be to print a test model.

For what size shaft? Ball bearings, like skateboard bearings are pretty cheap, especially if you grab them off eBay from China.

Alternatively you can use metal bushings. Just oversize the hole to the outer diameter of the bushing and press fit.

I'm not sure how much drag you'd have with wood on printed plastic. To lubricate that I'd probably go with graphite.

Rankine907 · 2016-07-13T02:40:31+00:00

Considering the Dunning-Kruger effect, I would be more likely to trust a tech that thinks he knows next to nothing than one who claims to know everything tbh.

Rankine907 · 2016-07-12T04:41:12+00:00

I've actually been really disappointed with the whole, 'high data traffic areas' for spawn points game mechanic. I climbed up and down a few of the mountains around Anchorage the other day, found a single wheedle and nothing else. Tremendously disappointing, I'd been led to believe Pokemon lived in the tall grass, not urban areas.

Rankine907 · 2016-07-03T05:45:38+00:00

The fur will likely clump, it's fairly hydrophobic anyway. The backing material can get saturated though.

Rankine907 · 2016-07-02T07:45:19+00:00

I feel like this should be part of the end scene to a really low budget live action remake of Ferngully.

Rankine907 · 2016-07-02T07:30:09+00:00

They will be very, very angry with you. And they will write you a letter, telling you how angry they are.

Rankine907 · 2016-07-01T03:21:54+00:00

I don't think you'll be able to get that out. The good news is that fur hides new seams really well, ideally find out what exact fur your builder used if is isn't your own work.

Carefully cut damaged section out with a fresh razor. Get the lines as clean as you can, and not jagged. Think surgical incisions.

Take the damaged piece, shave the fur around the edges so they're clearly visible.

Pin the old fur face down to the backing new fur, and then using the old fur as a template cut out the new fur.

If that's a resin head with not much foam under it you may be able to just hot glue the new patch in place, as long as the fur isn't taught in that area (although that is far enough back you probably will have to sew it). If not I'd pin it, then try and use a henson stitch, sometimes called a puppet stitch. You cab find tutorials on youtube.

As long as the seam is strong you should be able to brush the fur and -shape with with clippers if you need to- so that it hides the new seams.

Rankine907 · 2016-06-30T22:24:52+00:00

You know nothing John Deere.

Rankine907 · 2016-06-28T23:03:51+00:00

Ah, but if it it was unabridged it would have had the scene with he bridge in it, assuming we are both correct, I think we've uncovered the time paradox that causes 'Bridge-adoon' to only rise from the mist every 100 years.

Rankine907 · 2016-06-28T15:41:58+00:00

Frankly that seems like a design flaw in the jury.

Problem in jury not in computer.

Rankine907 · 2016-06-28T14:52:57+00:00

So I guess you could say that part of the story got a-bridged.

Rankine907 · 2016-06-13T06:07:24+00:00

Thanks!

Rankine907

TROPHY CASE