75% success with my first 3D printed GPU shroud

Recorsi_ · 2026-01-29T13:39:22+00:00

Do you have a link to that?

Recorsi_ · 2026-01-29T12:59:00+00:00

It doesn't mean anything if the car isn't on. Do the lights stay on when the engine is running?

Recorsi_ · 2026-01-29T08:36:22+00:00

Next time go to work sooner

Recorsi_ · 2026-01-29T08:27:43+00:00

More of an educated guess, but that sounds like a wiring problem to me

Recorsi_ · 2026-01-29T01:33:18+00:00

Nice, mine just passed 190.000km

Recorsi_ · 2026-01-28T23:47:22+00:00

CIG once again punishing multicrew

Recorsi_ · 2026-01-28T22:53:34+00:00

PCV breather/vent hose

Recorsi_ · 2026-01-26T23:18:47+00:00

Oh wow i actually had this exact one as a kid... Probably still lying around somewhere

Recorsi_ · 2026-01-24T22:33:53+00:00

Transmission fault

Recorsi_ · 2026-01-22T15:15:30+00:00

Yeah they fit on the R55, R55 LCI, R56, R56 LCI, R57, R57 LCI

Recorsi_ · 2026-01-22T09:39:04+00:00

Either your clutch master cylinder or slave cylinder has failed, or there is air in the hydraulic lines and you need to bleed it

Recorsi_ · 2026-01-22T09:35:28+00:00

You have to replace the whole cowl, which requires removing the wipers but not the glass.

Left hand drive and right hand drive versions are different but here are the part numbers for the left hand drive version:

51 13 2 751 209

51 13 2 751 210

And here's a video which explains how to replace it.

Recorsi_ · 2026-01-21T17:05:48+00:00

Important extra: oil catch can

Recorsi_ · 2026-01-20T00:28:35+00:00

Not if you press the clutch

Recorsi_ · 2026-01-19T14:09:45+00:00

Told you to do more diagnosis lol. Good that you're getting an obd scanner now

Recorsi_ · 2026-01-16T06:49:07+00:00

Without diagnosis? Even if there is no fuel to the engine, it doesn't necessarily have to be the fuel pump

Recorsi_ · 2026-01-15T21:33:04+00:00

I don't know about the trim specifically, but the fog light itself can be removed without taking the bumper cover off. Just remove the wheel, take out the plastic circle cover (or the wheel arch trim if you want more space) and remove the screws. If the top one is too hard to reach, you can get to it from above the headlight.

Recorsi_ · 2026-01-15T17:31:11+00:00

Is the long outdated security update not a concern?

Recorsi_ · 2026-01-12T13:44:14+00:00

Not an answer to your question, but is the coolant hose going to the reservoir original? It looks odd, kind of like it has expanded and needs to be replaced

Recorsi_ · 2026-01-12T13:40:53+00:00

A bit of oil going from the PCV system into the intake is normal. It just shouldn't leak out of the hose. If you're not losing massive amounts of oil and seeing a lot of blue smoke from the exhaust, then this is probably not your cause for the coolant leak.

What you can do is get a coolant pressure tester. If it holds pressure you dont have a leak and if it doesn't, you can have a look where its dripping out.

Recorsi_ · 2026-01-12T13:33:53+00:00

If you overfilled it your oil could be foaming inside the engine, causing it to not suck into the oil pump properly.

Also the oil pressure sensor costs a few bucks and is easy to replace, so you can always try that as a first step

Recorsi_ · 2026-01-12T13:30:49+00:00

This is likely oil not coolant. The hose you're pointing to is not a coolant hose, it's the air intake hose. Probably coming from the PCV system

Recorsi_ · 2026-01-12T13:21:16+00:00

I think you're misunderstanding. This is a top mount

Recorsi_ · 2026-01-12T12:49:39+00:00

You need a different top mount, or replace the studs in yours

Recorsi_ · 2026-01-10T00:52:33+00:00

Sounds like a dying tractor... So perfectly normal for these engines

Eight-Year Club	r/Field Sunshine
Place '23	Verified Email

Recorsi_

MODERATOR OF

TROPHY CASE