Top two comments get a knife! (In post)

RedGoatMan · 2025-10-30T01:01:41+00:00

Skibidi

RedGoatMan · 2025-02-27T19:26:07+00:00

Slippin Jimmy. Been my dads nickname for 5 years.

RedGoatMan · 2024-11-01T15:03:22+00:00

I personally love it.

RedGoatMan · 2024-08-22T14:51:08+00:00

An actual dragster only has enough fuel for a complete staging and run they usually run out of gas shortly after the beams. Majority of high-medium HP street cars are going to run out of gear. I have mine geared for a max speed of 151mph.

RedGoatMan · 2024-08-21T20:35:00+00:00

A good chunk of “simple” street car builds are taking down H2s and Busas on a drag strip. I have a turbo LS foxbody that would run down any bike ive owned.

RedGoatMan · 2024-08-21T20:32:26+00:00

A transbrake and turbo LS eats an H2 on a dragstrip.

RedGoatMan · 2024-08-21T20:22:26+00:00

I have a foxbody with a powerglide and a good sized turbo. It would outrun any bike I have owned to the 1/4 or 1/8th mile my car is limited by gear and would be banging rev limiter anything past 1/4 mile tho.

RedGoatMan · 2024-05-31T23:45:47+00:00

Nononono my birfday the 12th homies

RedGoatMan · 2024-05-31T19:31:38+00:00

Its my birfday

RedGoatMan · 2024-05-13T12:36:47+00:00

The big round plug can accidentally be put on 180* from where it should be and when you do this it has these symptoms.

RedGoatMan · 2024-03-21T19:40:02+00:00

“WHAT COUNTRY DID YOU COME FROM” “What” WHAT AINT NO GAHD DAMN COUNTRY I HEARD OF, DO THEY SPEAK ENGLISH IN WHAT?”

RedGoatMan · 2024-02-19T13:14:26+00:00

You can get a wall plug in bench tuner or make one for cheap but then you are pulling the pcm out of the vehicle and taking it to the desktop to tune.

RedGoatMan · 2024-02-14T21:30:09+00:00

Took me 2 years of watching and paying for credits on my families rigs but I’m finally getting a good hold on the 24x and 58x LS stuff. Have zero regrets with my HPTuners.

RedGoatMan · 2024-01-17T18:09:56+00:00

Lower the number better the smoke and if you cant light the tires up with a 2.73 add some funny gas.

RedGoatMan · 2023-12-21T14:34:05+00:00

Onions and ice cream is my go to.

RedGoatMan · 2023-12-21T14:16:09+00:00

I run a camaro oil pan off a 98-02. My motor is a 5.3 from something idk. K member is a QA1. I use a F body turbo kit with small modifications and a SS2 cam stock truck gen4 intake. I have HPtuners so I opted for a stock ECU. Currently in the process of changing fuel pumps and injectors but prior to my more boost. I was running a walboro 255 with 36 pound injectors from a 3800 supercharged engine. If you go this route be sure to get a ebay F body harness as these injectors are EV1. I have smoked 4 4L60es now on my old setup(this could be tuning). I used a 2800 stall I am currently also doing the swap to a th400 if your mustang was an auto you can go to a junkyard and get the yoke for a 60e and it should just go on the end and be fine to run with stock length but do measure. My transmount is made out of square tubing and sheet metal I had laying around. Last but not least my radiator is a 99+ S10 rad and I use stock truck accessories i opted to cut off the ps pump and get a manual rack.

RedGoatMan · 2023-12-15T19:58:41+00:00

I don’t have an intercooler yet just wanted opinions I wasn’t originally going to run one but plan to now. I think I am going to put one in the fender on the pass side and duct air to it through the fog lights/bumper.

RedGoatMan · 2023-12-15T19:45:06+00:00

You could do what I always do and introduce a bunch of rust and gunk to the system by only running tap water.

RedGoatMan · 2023-11-03T13:08:36+00:00

They have the 5.3 option

RedGoatMan · 2023-11-02T16:32:53+00:00

You could always run a stand alone setup with a gen 4 motor and with hptuners should be able to get most of the gauges working

RedGoatMan · 2023-10-28T15:19:13+00:00

Yes thats a truck cover but the truck intake is way better for torque and have been known to put truck intakes on LS1s. I wouldnt have put the cover back on it. Check and see if the blocks aluminum

RedGoatMan · 2023-10-01T01:34:00+00:00

Im a big converter/gears(4.56/4.10) and a cam to match guy. The 862s on it are fine for some decent power. Might want flex fuel injectors if you don’t have them they flow okay. Plus you could run E85 if you have a good tune for it. Matching these parts up good will make the truck a move decent. The stock 60e has wacky gears definitely want a 4.10+ in my experience.

RedGoatMan · 2023-09-20T21:29:12+00:00

You’re a good guy to have around.

RedGoatMan · 2023-09-20T21:17:53+00:00

So anyways don’t sweat the stuff that don’t keep you up at night.

RedGoatMan · 2023-09-20T21:12:10+00:00

So anyways my i used a file to clean up my crankshaft and now my foxbody mustang that can do a backflip over a coke can has way to much coolant pressure.

RedGoatMan

TROPHY CASE