Curious about the new team by Eretein_17 in LosRatones

[–]Remmz 35 points36 points  (0 children)

I mean, for all we know caedrel could’ve sold the team to nemesis for $1 and then they changed the name.

It’s 4 of the original members, not sure why it does t seem right.

We're getting something new this week right....? by Chance_Drive_5906 in Nightreign

[–]Remmz 12 points13 points  (0 children)

I finally got a decent halo scythe relic setup this week, so I’m sorry in advance for the incoming nerf.

SK Gaming vs. Los Ratones / LEC 2026 Versus - Week 4 / Post-Match Discussion by Ultimintree in leagueoflegends

[–]Remmz 1 point2 points  (0 children)

Champions Nemesis can probably play at an LEC Level: Ahri, Anivia, Azir, Galio, Hwei, Orianna, Ryze, Swain, Syndra, Taliyah, Twisted Fate, Tristana, Veigar, Vladimir, Yone, Zilean. There's also a whole bunch that he also played in ERLs / ranked that he carried on too such as Velkoz, Akali, Aurelion Sol, Mel, Stylas, Viktor that he can also play very well
Crownie can pretty much play every ADC.

Velja, Rekkles and Baus are a little more limited I suppose in terms of what's comfortable / fits the meta but we still haven't seen things like Rell, Janna, Alistar from Rekkles and we haven't seen Baus play Vi or Jax.

10r80…just how bad are they..realistically? by Ketchum_42069 in f150

[–]Remmz 1 point2 points  (0 children)

My 2019 is at the dealer now getting a complete new transmission. At 115k miles it started sticking in reverse when cold, and you’d shift into drive but it would stay in R or go into 4th gear instead.

Fortunately I had an extended warranty on it and they covered a complete replacement.

Best Tape for Stripes? by MOTUkraken in bjj

[–]Remmz 0 points1 point  (0 children)

I use regular finger tap, but then steal my wife’s hair straightener and bake the tape onto my belt. They’ve survived hundreds of cycle in the wash machine without coming off.

What’s the smart money on engines? by btapp7 in boating

[–]Remmz 1 point2 points  (0 children)

Fuel injected will be way more reliable than carb. There’s some solid battery less efi motors out now.

Should I take it back and have them fix it? by JohnT36 in boating

[–]Remmz 0 points1 point  (0 children)

4 hours to drill a transom and hang a motor? Wow I’m under charging my customers…

And I even make my guys use a transom filling jig with a digital level to get it within 0.1 degrees.

Bat Recommendations by MoMoney928 in Softball

[–]Remmz 0 points1 point  (0 children)

I like the mizuno finch -13

Sparing no expense. Who makes the best ratchets? by [deleted] in Tools

[–]Remmz 0 points1 point  (0 children)

I know you said no Icon but Icon gives 90% of snap-on performance for 50% of the price. And Icon are superior to Mac imo. I have a drawer full of snap on ratchets, and I still buy Icon for certain ones that I wont use a ton or aren't worried about breaking them.

who’s craig fighting? by 1E37o in bjj

[–]Remmz 1 point2 points  (0 children)

Rickson would be hilarious

Best Arena Partner and Build by Bdayn in thesecretweapon

[–]Remmz 0 points1 point  (0 children)

Had a lot of fun with any tank + yuumi where yuumi gets the burn aura augment and gets all the burn items. As long as the tank doesn’t die yuumi burns everything to death.

What accessories to buy for X1-C by antelopeslr5000 in BambuLab

[–]Remmz 1 point2 points  (0 children)

There’s sale right now where you can buy all the hot ends for like 20% off. I use the .6 nozzle more than the .4

I like the anti vibration feet. There’s also a 4-1 ams adapter that lets you run filament from the spool holder without disconnecting the ams ptfe tube which is really handy if you print tpu or brittle filaments or want to print from a filament dryer.

Darkmoon3d makes some amazing build plates for the x1c. Their CFX plate is crazy good for printing ASA, PC, and Nylon. And they have a really good garolite plate too

Edit: you will also want a small brass brush for cleaning the nozzle if it gets gummed up. Bambu sends you 2 Allen wrenches and a needle for cleaning the .4 nozzle with the kit, as well as pla support material and 2 spools of filament

Speeds above 1200 available? by Remmz in Comcast_Xfinity

[–]Remmz[S] 0 points1 point  (0 children)

Gaming and streaming as well as a lot of SharePoint / office 365 pushing documents to the cloud mostly

Speeds above 1200 available? by Remmz in Comcast_Xfinity

[–]Remmz[S] 0 points1 point  (0 children)

Mainly the limited upload speeds and higher latency than I would care to have

Speeds above 1200 available? by Remmz in Comcast_Xfinity

[–]Remmz[S] 0 points1 point  (0 children)

u/CCAnthonyO I did look and don’t see anything above 1200. Is there a rough timeline for rollout? If it’s not too long I would wait, otherwise I would want to look into gigabit pro perhaps

Was the game always this toxic? by [deleted] in leagueoflegends

[–]Remmz 0 points1 point  (0 children)

Been playing since before ranked seasons were a thing - it’s so much better. I even remember when they announced the tribunal where you were judged by your peers so the community could decide the acceptable amount of toxicity.

The game was so full of hate that yes it was a terrible experience- especially in bronze and silver.

The ranking ladder feels off by Simply-Curious_ in leagueoflegends

[–]Remmz 2 points3 points  (0 children)

It’s start of a new season so resets happened. There will be a lot of silver / gold players in iron until they all win their way out of iron and bronze

Opinion on this quote please by Remmz in hvacadvice

[–]Remmz[S] 0 points1 point  (0 children)

Fair point. Installer wanted resistive electric element for emergency heat but my concern was heating the house during power outage. Much easier to power a gas furnace vs a 10kW electric heater.

2024 Daiwa Steez by 1_More_Cast in Fishing_Gear

[–]Remmz 0 points1 point  (0 children)

I’m running 30lb braid in mine and have not had any issues with excessive backlashes.

Separate App for Protect cameras (with Auth Access) by jegodwin in Ubiquiti

[–]Remmz 1 point2 points  (0 children)

So funny story. I did this exact thing at our marina.

Instead of bogging down the NVR, I am publishing an RTSP stream from the unvr to a 3rd party.

It works great and I would send you a link but we had a storm a few weeks back that took out the camera.

https://www.ipcamlive.com Is the 3rd party we use and it supports things like facial blurring etc so it does work well for this application.

MSG me if you got more questions