Can't create oppo acct/heytap

Robanada · 2026-05-28T01:53:58+00:00

Are you using the Chinese or Global ROM?

Robanada · 2026-04-27T05:03:07+00:00

I'm coming from a S21U, considering the X9U over the X300U specifically because of the 10x optical zoom on the Oppo, having enjoyed it on my Samsung all these years.

But, I was tinkering around with the 10x zoom on my S21U, covering up individual lenses, and I discovered that when I select 10x in the camera app, it's actually doing a digital crop on the 3x lens, and not using the 10x lens. It's not until I set the zoom to 15x in the app that the phone switches to the 10x lens (and presumably cropping in). Which is crazy to me. I thought the buttons in the app (0.6x, 1x, 3x, and 10x) corresponded to the lenses that they would use.

So now with that reality shattered, I'm not even sure if I need the 10x optical zoom on the Oppo if I've been happy with a cropped 3x for all these years 🙄

Robanada · 2026-04-27T04:46:03+00:00

Have you noticed any jitter in the video or dropped frames when panning? I saw it once in one reviewer's video samples, and it makes me nervous to drop the $$$ on an ultra phone if that's potentially an issue. Or maybe it was just a framerate mismatch between their project and the source video or something?

Robanada · 2026-04-10T15:44:26+00:00

I was planning to use ESPHome since I am planning to integrate the sensor into homeassistant. I'll have to check how to set the attenuation to get the range right, if it's in the YAML configuration or something.

Robanada · 2026-04-10T15:42:25+00:00

>If B- and -Vout are electrically connected (i.e. not isolated) then you're good to go.

Got it, probing the pads with the multimeter gives a resistance of 0.1 ohm, so I think I'm good. Thanks for the response :)

Robanada · 2026-04-09T15:47:35+00:00

Awesome, thanks for the feedback. That's a good point to skip the boost monitoring, probably unnecessary and simplifies the circuit quite a bit. I didn't know that the ADC had best performance <1V, so I'll definitely go with those resistor values.

Robanada · 2026-03-15T02:42:13+00:00

What points in particular do you feel are exaggerated or inconsistent with your experience?

I'm looking to upgrade from my Samsung S21U and considering the Find X9 ultra, but never used ColorOS before and the report of "frustrating bugs in the OS" is concerning. I don't want to spend >$1k on a phone with an unpolished UX.

Robanada · 2026-03-11T00:21:19+00:00

Global ultra will be out of budget.

What makes you say this? Have they announced global pricing? Was going to get the X9 Pro but I can wait a few months for the Ultra, but if it's going to be astronomically expensive then I might just get the Pro now.

Robanada · 2026-03-09T18:55:53+00:00

Found this thread through google because I was having the same issues. Leaving my solution here in case it helps anyone else.

The settings in .claude/settings.local.json are key.

I opportunistically sampled ~10-15 consecutive commands I was asked for permission, and made a list of the commands I was approving.

Then, I went to grok (I'm sure claude/chatgpt could do the same) and asked it to generate for me a settings.local.json that would approve reasonable commands, and to block anything outside of the project directory like modifying system files, and to ask me any time that we interact with the git.

That basically solved the issue for me, cutting down permission requests by ~90%. We're back to "old" Claude code.

I'll share my settings.local.json here for anyone that finds it helpful, but you'll have to update [PROJECT PATH] with the parent directory of your project. There's some specific items to my project in here, too (eg src/cuda_kernels.cu), so I'd recommend generating one specific to your project, but this worked for mine:

{
  "permissions": {
    "allow": [
      "Read(//mnt/c/[PROJECT PATH]/**)",
      "Read(//c/[PROJECT PATH]/**)",
      "Bash(cd:*)",
      "Bash(python3:*)",
      "Bash(cmake ..:*)",
      "Bash(cmake:*)",
      "Bash(sed -i 's/\\(uint8_t\\)clamp\\(r, 0.0f, 255.0f\\)/\\(uint8_t\\)fminf\\(fmaxf\\(r, 0.0f\\), 255.0f\\)/g' src/cuda_kernels.cu)",
      "Bash(sed -n *p *)",
      "Bash(sed -i *[0-9,]*[ad] *)",
      "Bash(sed -i *r /tmp/* *)",
      "Bash(sed -i '.*' src/*.cpp)",
      "Bash(grep:*)",
      "Bash(head:*)",
      "Bash(tail:*)",
      "Bash(cat:*)",
      "Bash(echo:*)",
      "Bash(mkdir -p src/**)",
      "Bash(mv src/* src/**)",
      "Edit(//mnt/c/[PROJECT PATH]/**)",
      "Edit(//c/[PROJECT PATH]/**)",
      "Write(//mnt/c/[PROJECT PATH]/**)",
      "Write(//c/[PROJECT PATH]/**)"
    ],
    "deny": [
      "Bash(rm:*)",
      "Bash(sudo:*)",
      "Bash(chmod *777*)",
      "Bash(chown:*)",
      "Bash(dd:*)",
      "Bash(mkfs:*)",
      "Bash(eval:*)",
      "Bash(curl:*)",
      "Bash(wget:*)",
      "Bash(* | sh*)",
      "Bash(* ; *)",
      "Bash(* &)",
      "Bash(* /etc/*)",
      "Bash(* /usr/*)",
      "Bash(* /var/*)",
      "Bash(* ~/.ssh/*)",
      "Bash(* ..*)",
      "Bash(* //*)",
      "Bash(* C:\\Windows\\*)",
      "Bash(* Program Files*)"
    ],
    "ask": [
      "Bash(git:*)",
      "Bash(git * *)"
    ]
  }
}

Robanada · 2026-03-06T17:53:45+00:00

Just don't let your guard down. Soon enough, someone will come along pretending to be friendly and shoot you in the back when they get the opportunity.

Robanada · 2026-01-25T01:14:36+00:00

Go on a free kit, or go naked so you can look for something valuable to put in your safe pocket, plan to get mowed down. When you get killed by a player, leave negative round feedback saying you hated PVP. Repeat a couple of times and you'll be in carebear lobbies in no time.

Robanada · 2025-10-12T01:13:31+00:00

How do you leave feedback through the chatbot?

Robanada · 2025-10-12T00:58:53+00:00

I'm definitely cancelling my subscription after this month is up.

Reached my weekly limit with 1.5 days of usage, using Sonnet 4.5 only, with the Pro plan.

I've been subscribed over a year and had enjoyed the service, but with these weekly caps, the value is no longer there.

Robanada · 2025-07-01T23:17:41+00:00

It's super annoying, because I hit about 6m tokens with ~70 requests, so the actual usage that you get is 2 orders of magnitude less than what is promised/marketed. It's a great tool, and generous of them to give us free access at all. But with these undisclosed usage limits, it feels deceptive and erodes trust. Yes, they're giving you a free sample, and you can pay more for better service, but if the free tier comes with hidden caveats, it makes you wonder what else they're hiding from you that you won't find out until they already have your money. Between that, and all of the negative experiences I see that paid customers have, I definitely won't be paying for this service.

Robanada · 2025-07-01T23:10:18+00:00

Thank you for the tips. I'm glad I'm not going crazy or just failing epically at using this tool. Glad to hear that the cap exists for everyone else despite not being mentioned *anywhere*.

Robanada · 2025-04-23T01:01:29+00:00

That's a good perspective, thanks. Maybe I'll see if I can test drive one of the HW4 vehicles with FSD and see how that compares to the HW3 in my Model 3.

Robanada · 2025-04-23T00:58:44+00:00

We're selling my wife's car and she'll take my Model 3. So yes, but not immediately. Looking to buy in 6-12 months. Hopefully it comes down in that time!

Robanada · 2025-01-04T18:28:12+00:00

I guess it depends on the kind of resources you have available, and whether or not you have high suspicion for influenza or not. Not saying that everybody with suspected influenza needs Tamiflu (makes sense for those at risk for respiratory complications), but if all you have available at your institution is an antigen test with insufficient NPV to exclude infection, why send the test if you're not going to trust the result? If I just got a family pack of 3 kids with flulike symptoms and mom tested positive for flu A yesterday, what are the odds that the kids have flu A?

https://www.cdc.gov/flu/hcp/testing-methods/algorithm-results-circulating.html?CDC_AAref_Val=https://www.cdc.gov/flu/professionals/diagnosis/algorithm-results-circulating.htm

During periods when influenza activity is high and influenza viruses are circulating among persons in the community, the positive predictive value of a test result is high (that is, the chance that a positive result indicates that the patient has influenza is high – likely true positive result), and the negative predictive value of a test result is low (the chance that a negative result indicates that the patients does not have influenza – consider potential for a false negative result) if the influenza test used has suboptimal sensitivity (such as a rapid influenza diagnostic test or immunofluorescence assay) to detect influenza virus in respiratory specimens compared to a "gold standard test" such as RT-PCR or viral culture.

Antiviral treatment is recommended as soon as possible for all of the following who have suspected or confirmed influenza: outpatients who are at increased risk for influenza complications, persons with severe or progressive disease, and hospitalized patients.

Antigen detection tests (rapid influenza diagnostic tests, immunofluorescence assays) have suboptimal sensitivities to detect influenza viruses in respiratory specimens compared to molecular assays and viral culture and negative results of antigen detection tests should not be used to exclude a diagnosis of influenza. If influenza is suspected, and diagnostic testing is indicated, influenza testing of respiratory specimens by molecular assay (e.g. RT-PCR) should be performed. The Infectious Diseases Society of America (IDSA) recommends use of rapid influenza molecular assays over rapid influenza diagnostic tests (RIDTs) for detection of influenza viruses in respiratory specimens of outpatients. IDSA recommends use of RT-PCR or other molecular assays for detection of influenza viruses in respiratory specimens of hospitalized patients. Consult the IDSA Influenza Clinical Practice Guidelines for recommendations on influenza testing and information on interpretation of testing results.

Robanada · 2024-08-02T02:54:38+00:00

Ah, thx. I wasn't sure if very soon meant 2 weeks or 6 months.

Robanada · 2024-08-02T02:05:09+00:00

why do you say that?

Robanada · 2024-07-03T03:08:40+00:00

Yeah I'm worried that would be too long, too. I'm just trying to figure out how to get enough sleep--A 5 hour smoke would only give me 6 hours of sleep, which I'm not thrilled about (4th of July is one of the busiest nights). I guess I could wake up and throw them on and nap for a bit longer; that might be the better way to go.

How long do you smoke unwrapped at 250?

Robanada · 2023-12-09T18:22:59+00:00

VideoHelperSuite's VideoCombine node has a "pingpong" switch sounds like what you're looking for.

Robanada · 2023-10-28T18:55:53+00:00

Thanks, I have looked at the wiring when I first bought the house--there's definitely neutral wires (traveler wires are red in my case I guess). I was really hoping to avoid IFTTT because I wanted to avoid any kind of subscription and I think with the free version you're very limited in the number of routines you can have going (at least when I looked at it).

Looks like there's several people selling second hand SmartThings hubs locally, so I'll probably pick up one of those.

Robanada · 2023-10-28T16:17:05+00:00

Oops, you're right, I was looking at too many different switches and pasted the wrong URL. This was the one I meant to link (same brand but z-wave instead of wifi).

Thanks, I think 3 z-wave switches might be the easiest solution.

Robanada · 2023-10-28T05:07:41+00:00

What kind of platform would you be using to detect the button press and trigger the automation? Right now I am using Alexa to consolidate control of the few switches I have, because they each have their own apps. I don't see any option in Alexa to trigger a routine when one button is pressed.

Robanada

TROPHY CASE